Enable CI-Tron jobs for piglit full run for rpi3 and skqp jobs for rpi4
and rpi5. They will run in parallel with the baremetal ones for
comparison.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36032>
Traces jobs upload their results at the end, making them incompatible
with the current design of CI-tron which doesn't allow internet access
for security reasons, so they are not included for now.
We're working on a solution for controlled access to specific domains,
and will add the traces jobs once that's ready.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35215>
Some tests no longer OOM after updating the devices to the 6.12 kernel.
Therefore, remove those tests from the skip list.
Also, reduce the timeout of some full-run jobs, as the VK full-run
usually takes no longer than 25 minutes in the RPi 4 and no longer than
30 minutes in the RPi 5.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35300>
While all the arm32 jobs are testing GL, there are both GL and VK arm64
jobs. This is required to be able to use the rootfs from the test-*
containers.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34451>
As we have a -vk suffix for the Vulkan-related suites, add a -gl one for
the OpenGL/ES related suites.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34680>
The aim is to increase the coverage as maximum as possible while using
the less possible DuTs, everything under a testing budget of 10 minutes.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34680>
Structured tagging (cf. mesa/mesa!33421) captures a checksum of the
thing we think we're building, and verifies this through the chain.
When we run container builds, we check that the tag we've captured in
the CI variables matches the calculated checksum, to make sure the
declared tags are consistent and we always have traceability.
When we run tests, we check the tags again between what was declared in
the CI variables and what we're actually running from the test
container. This makes sure that we're always testing what we think we're
testing.
As a side advantage, the rule inheritance we need to make this work
means that we can start doing more optional downloads via overlays,
instead of pulling a whole container full of stuff we might not ever
use.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34539>
mesa/piglit!996 fixed up Piglit to allow us to do trace downloads again,
so we can now bring these jobs back. The fdno trace jobs hosted at
Google are still disabled whilst we try to fix their nginx.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34245>
It seems we have some issue with the driver, due the high number of
(random) flakes that appear in different jobs, and that eventually are
causing issues with Marge.
While we don't identify where is the problem, let's disable the job to
avoid interferences with Marge.
Acked-by: Valentine Burley <valentine.burley@collabora.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33490>
Use Undefined Behaviour Sanitizer to detect issues in v3d/v3dv, as well
as in vc4.
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30880>
This kernel unmask all the MMU errors, so it gives us more visibility
for driver issues.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31445>
It was set to 170min, which made sense when the job timeout was 3h, but
then 4bb564f40d ("broadcom/ci: add more jobs to test with rpi5")
lowered the job timeout to 2h without lowering the test timeout to match.
Fixes: 4bb564f40d ("broadcom/ci: add more jobs to test with rpi5")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30800>
Now that there are more rpi5 devices in the CI, run all the GL/GLES
tests and CL tests nightly.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30349>
This runs part of GL and Vulkan tests in vc4/v3d/v3dv with the address
sanitizer enabled to detect memory issues and leaks.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30349>
Now that there are more rpi5 in the CI, let's add pre-merge jobs.
This also restrict the nightly job to be executed by devices allocated
to run full runs.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30087>
While Raspberry PI OS 64-bit is the suggested version for rpi3 devices
and newers, for older devices like rpi1 to rpi2, which uses the same
GPU, the recommended flavour is 32-bit.
Also, while 64-bit is the recommended version, users can still decide to
use the 32-bit flavour.
Hence, spend a bit of nightly time to run a subset of the OpenGL/ES
tests.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30003>
Nowadays the recommended version for Raspberry Pi OS in rpi3 is 64-bits.
Hence, let's run our tests in 64-bits too.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30003>
The same device can be run with 32-bits or 64-bits, so no need to
include the arch in the name.
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30003>
Currently 92% of our Vulkan CI tests hit "Not Supported" test
cases, which is ridiculously high. Add a bunch of skips, some
of which include very large categories of tests of features we
already know we don't support, so we stop wasting so much time
skipping tests.
With this, we can also increase the fraction of tests we execute
for vulkan significantly, while still keeping job run times
under control.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/28264>
We are slightly over-subscribed right now, with 21 merge jobs (10 vk
+ 10 gl + 1 traces) for 20 RPi4, so let's split the tests between
slightly fewer RPi4 and make each split job run for slightly longer,
because it also means that all the jobs start immediately, reducing the
overall delay in merging any MR that triggers this job.
The typical run time for this job was around 8 min with a 10-split; with
an 8-split it is now 9 min, which is still within the 10 min target and
well below the 15min limit.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27391>
Add full Vulkan CTS testing for the new V3D 7.1 driver, used in the
Raspberry Pi 5.
So far we add it to run nightly; in future will be added to pre-merge
CI.
Reviewed-by: Martin Roukala <martin.roukala@mupuf.org>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26705>
