v2 (Topi):
- Make bit-size handling order be 16-bit, 32-bit, 64-bit
- Clamp lower exponent range at -28 instead of -30.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When we destroy a context, we need to temporarily make that context
the current one for the thread.
That's because during context tear-down we make many calls to
_mesa_reference_texobj(&texObj, NULL). Note there's no context
parameter. If the texture's refcount goes to zero and we need to
delete it, we use the thread's current context. But if that context
isn't the context we're tearing down, we get into trouble when
deallocating sampler views. See patch 593e36f956 ("st/mesa:
implement "zombie" sampler views (v2)") for background information.
Also, we need to release any sampler views attached to the fallback
textures.
Fixes a crash on exit with a glretrace of the Nobel Clinician
application.
v2: at end of st_destroy_context(), check if save_ctx == ctx and
unbind the context if so.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
In Android O, MESA needs to statically link libexpat so that
it's in same VNDK namespace.
v2: apply change also to anv driver (Tapani)
v3: use += in anv change (Eric Engestrom)
Change-Id: I82b0be5c817c21e734dfdf5bfb6a9aa1d414ab33
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
If VK_QUERY_RESULT_WITH_AVAILABILY_BIT is set and
VK_QUERY_RESULT_WAIT_BIT and VK_QUERY_RESULT_PARTIAL_BIT are both not
set, we need return to VK_NOT_READY only and set the availability
status field for each query.
From Vulkan spec:
"If VK_QUERY_RESULT_WAIT_BIT and VK_QUERY_RESULT_PARTIAL_BIT are both
not set then no result values are written to pData for queries that are
in the unavailable state at the time of the call, and
vkGetQueryPoolResults returns VK_NOT_READY. However, availability state
is still written to pData for those queries if
VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set."
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
If the query is not available and VK_QUERY_RESULT_WAIT_BIT and
VK_QUERY_RESULT_PARTIAL_BIT are both not set, the spec doesn't
allow to modify its result.
From Vulkan spec:
"If VK_QUERY_RESULT_WAIT_BIT and VK_QUERY_RESULT_PARTIAL_BIT are
both not set then no result values are written to pData for queries
that are in the unavailable state at the time of the call, and
vkGetQueryPoolResults returns VK_NOT_READY. However, availability state
is still written to pData for those queries
if VK_QUERY_RESULT_WITH_AVAILABILITY_BIT is set."
v2:
- Move VK_NOT_READY change to next patch (Samuel Pitoiset)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
These enums match but compiler warns about implicit conversion.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
(warning: 'const' type qualifier on return type has no effect)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
With vkpipelinedb Samuel discovered a regression since we stopped
stripping types at the spir-v level.
This adds a check to the var splitting for the case where it
asserts the type hasn't changed, when it has just created a bare
type, and it's different than the original type which has an explicit
stride.
This also removes a pointless assert that also triggers.
Fixes: 3b3653c4cf (nir/spirv: don't use bare types, remove assert in split vars for testing)
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Also handle GLSL_TYPE_INTERFACE the same way we do GLSL_TYPE_STRUCT in
various places. Motivated by ARB_gl_spirv work, that will take
advantage of the interface types when handling NIR coming from SPIR-V.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Also updates gl_spirv to pick the right one. At the moment nothing
uses it, but upcoming functionality part of ARB_gl_spirv will use it,
and we also later can be more assertful when handling certain features
for each of the execution environments.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
The CTS requires a 565-no-depth-no-stencil (meaning d/s not-required, not
not-present) config for ES 3.0, but at depth 24 of X11 we wouldn't do so.
We can satisfy that bad requirement using a pbuffer-only visual with
whatever other buffers the driver happens to have given us.
I've tried to raise this as an absurd requirement with Khronos and made no
progress.
v2: Make sure it's single sample, no depth, no stencil. Comment typo fix
Reviewed-by: Adam Jackson <ajax@redhat.com>
Report 320 for a6xx, which isn't *quite* true (no geom/tess, in
particular), but other caps keep the reported GL and GLSL versions
correct (3.1 / 3.10 es). But reporting 320 will switch on
EXT_gpu_shader5, which is the goal.
Signed-off-by: Rob Clark <robdclark@gmail.com>
For GLES2+ contexts, enable EXT_gpu_shader5 if the driver exposes a
sufficiently high ESSL feature level, even if the GLSL feature level
isn't high enough.
This allows drivers to support EXT_gpu_shader5 in GLES contexts before
they support all the additional features of ARB_gpu_shader5 in GL
contexts.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Adds a new cap to allow drivers to expose higher shading language
versions in GLES contexts, to avoid having to report an artificially
low version for the benefit of GL contexts.
The motivation is to expose EXT_gpu_shader5 even though a driver may
not support all the features needed for the corresponding GL extension
(ARB_gpu_shader5).
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fix build error after llvm-9.0svn r352827 ("[opaque pointer types] Add a
FunctionCallee wrapper type, and use it.").
In file included from ./rasterizer/jitter/builder.h:158:0,
from swr_shader.cpp:35:
./rasterizer/jitter/gen_builder_meta.hpp: In member function ‘llvm::Value* SwrJit::Builder::VGATHERPD(llvm::Value*, llvm::Value*, llvm::Value*, llvm::Value*, llvm::Value*, const llvm:
:Twine&)’:
./rasterizer/jitter/gen_builder_meta.hpp:51:117: error: no matching function for call to ‘cast(llvm::FunctionCallee)’
Function* pFunc = cast<Function>(JM()->mpCurrentModule->getOrInsertFunction("meta.intrinsic.VGATHERPD", pFuncTy));
^
Suggested-by: Philip Meulengracht <the_meulengracht@hotmail.com>
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alok Hota <alok.hota@intel.com>
This lowering isn't needed for RADV because AMDGCN has two
instructions. It will be disabled for RADV in an upcoming series.
While we are at it, factorize a little bit.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Only the exponent needs to be 32-bit signed integer.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fix this build error with GCC 4.4.7.
CC nir/nir_opt_copy_prop_vars.lo
nir/nir_opt_copy_prop_vars.c: In function ‘load_element_from_ssa_entry_value’:
nir/nir_opt_copy_prop_vars.c:454: error: unknown field ‘ssa’ specified in initializer
nir/nir_opt_copy_prop_vars.c:455: error: unknown field ‘def’ specified in initializer
nir/nir_opt_copy_prop_vars.c:456: error: unknown field ‘component’ specified in initializer
nir/nir_opt_copy_prop_vars.c:456: error: extra brace group at end of initializer
nir/nir_opt_copy_prop_vars.c:456: error: (near initialization for ‘(anonymous).<anonymous>’)
nir/nir_opt_copy_prop_vars.c:456: warning: excess elements in union initializer
nir/nir_opt_copy_prop_vars.c:456: warning: (near initialization for ‘(anonymous).<anonymous>’)
Fixes: 96c32d7776 ("nir/copy_prop_vars: handle load/store of vector elements")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109810
Reviewed-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Invoking VALGRIND_CHECK_MEM_IS_DEFINED pulls in enough code to convince
gcc to not inline __gen_uint and results in a lot of packing code ending
up out-of-line with lots of stack copying. To ameliorate this, only
insert the check inside the packer if DEBUG is defined and instead
perform the validation checking before submitting the batch to the
kernel. This should give accurate results if --trace-origins=yes is
used, and failing that we can recompile in full debug mode to check on
insertion.
Improve drawoverhead baseline by 25% with a default build with
valgrind-dev installed (with effectively no loss of vg coverage).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes:
dEQP-GLES31.functional.image_load_store.early_fragment_tests.no_early_fragment_tests_depth
dEQP-GLES31.functional.image_load_store.early_fragment_tests.no_early_fragment_tests_stencil
dEQP-GLES31.functional.image_load_store.early_fragment_tests.no_early_fragment_tests_depth_fbo
dEQP-GLES31.functional.image_load_store.early_fragment_tests.no_early_fragment_tests_stencil_fbo
Signed-off-by: Rob Clark <robdclark@gmail.com>
There are other cases where we need to disable early-z, like image
writes. So rename to something more generic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
We can show the actual command & line where the failure happened
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Suggested-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This is required by the validation layers if we want to validate the
commands inserted by the overlay layer.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Fixes: 14cad8786a ("radv: generate the same driver UUID as radeonsi")
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
'invariant' qualifier is propagated on variables which are used
to calculate other invariant variables, however when we are matching
variable's declarations we should take into account only explicitly
declared invariance because invariance propagation is an implementation
specific detail.
Thus new flag is added to ir_variable_data which indicates 'invariant'
qualifier being explicitly set in the shader.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100316
Fixes: 89b60492 ('glsl: Add a pass to propagate the "invariant" and
"precise" qualifiers')
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The swizzling was putting float one in not integer 1.
This fixes a lot of arb_texture_view-rendering-formats cases.
Reviewed-by: Brian Paul <brianp@vmware.com>
I don't think this really buys us anything and TG4 with cubemap arrays
falls over because sampler == 2, but otherwise works fine.
Fixes:
./bin/textureGather fs shadow r CubeArray repeat
on softpipe with ARB_gpu_shader5 enabled.
Reviewed-by: Brian Paul <brianp@vmware.com>
These didn't deal with the width == 32 case that TGSI is defined with.
Fixes piglit tests if ARB_gpu_shader5 is enabled.
Reviewed-by: Brian Paul <brianp@vmware.com>
Rather than skipping code that looked like this:
loop {
...
if (cond) {
do_work_1();
continue;
} else {
break;
}
do_work_2();
}
Previously we would turn this into:
loop {
...
if (cond) {
do_work_1();
continue;
} else {
do_work_2();
break;
}
}
This was clearly wrong. This change checks for this case and makes
sure we now leave it for nir_opt_dead_cf() to clean up.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The idea was that we could skip uploading the constant-indexed uniform
data and just upload the uniforms that are variably-indexed. However,
since the VS bin and render shaders may have a different set of uniforms
used, this meant that we had to upload the UBO for each of them. The
first case is generally a fairly small impact (usually the uniform array
is the most space, other than a couple of FSes in shader-db), while the
second is a larger impact: 3DMMES2 was uploading 38k/frame of uniforms
instead of 18k.
Given that the optimization is of dubious value, has a big downside, and
is quite a bit of code, just drop it. No change in shader-db. No change
on 3DMMES2 (n=15).
We'd end up with the constant offset in the uniform stream anyway, since
they're bigger than small immediates. Avoids the extra uniforms and adds
in the shader in favor of just adding once on the CPU.
shader-db:
total instructions in shared programs: 6496865 -> 6494851 (-0.03%)
total uniforms in shared programs: 2119511 -> 2117243 (-0.11%)
I want to reuse this for encoding small constant UBO/SSBO offsets into the
uniform stream to reduce the extra uniform loads and adds for the small
constant offsets.
