This is a shader based median filter, generally
used for noise reduction, it could still need some
improvements, but should usually work out of the box.
Signed-off-by: Christian König <deathsimple@vodafone.de>
The wm max threads is in the same dword as the dispatch enable. The
hardware gets super angry if you set max threads to 0, even if you
aren't dispatching threads.
Avoid unrollong loops that are either nested loops or
where the loop body times the unroll count is huge.
The change is far from being perfect but it extends the
loop unrolling decision heuristic by some additional
safeguard. In particular this cuts down compilation of
a shader precomputing atmospheric scattering integral
tables containing two nesting levels in a loop from
something way beyond some minutes (I never waited for
it to finish) to some fractions of a second.
This fixes piglit tests glsl-fs-unroll-explosion and
glsl-vs-unroll-explosion on r600g.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
width, height parameter in glTexImage2D() includes: texture image
width + 2 * border (if any). So when doing the texture size check
in _mesa_test_proxy_teximage() width and height should not exceed
maximum supported size for target texture type + 2 * border.
i.e. 1 << (ctx->Const.MaxTextureLevels - 1) + 2 * border
Texture border is anyway stripped out before it is given to intel
or gallium drivers.
This patch fixes Intel oglconform test case:
max_values negative.textureSize.textureCube
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44970
Note: This is a candidate for mesa 8.0 branch.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
If we have no more enabled samplers and we've reset all the previously
used ones, no need to keep going around this loop.
(just moved some stuff around to clean it up a bit).
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
From what I can see we were taking the debug path all the time,
when we probably only want it for enable debug path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As libGL will use libglapi for function lookups, we need to enable the remap
table.
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=45660
We don't want our VBOs mapped when we're drawing. This change checks
if the vertex store VBO is mapped before we execute a list, unmaps it,
then remaps it after drawing. This situation pops up when building a
nested display list in GL_COMPILE_AND_EXECUTE mode.
Reviewed-by: Eric Anholt <eric@anholt.net>
Something has gone wrong if swrast is requested but cannot be
loaded. The user really should be made aware of this, (and instructed
to set LIBGL_DEBUG for more details).
The wording of this error message is updated from "reverting to
indirect rendering" to the more objectively descriptive "failed to
load driver: swrast". The former wording makes assumptions about what
the calling code will decide to do next, rather than simply describing
what went wrong within the current function. The new wording is
consistent with the critical errors recently added for hardware
drivers that fail to load.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Something has gone wrong if we were asked to load a driver of a
specific name, but it failed to load for some reason. The user really
should be made aware of this, (and instructed to set LIBGL_DEBUG for
more details).
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Sometimes an error is so sever that we want to print it even when the
user hasn't specifically requested debugging by setting LIBGL_DEBUG.
Add a CriticalErrorMessageF macro to be used for this case. (The error
message can still be slienced with the existing LIBGL_DEBUG=quiet).
For critical error messages we also direct the user to set the
LIBGL_DEBUG environment variable for more details.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
The description of ErrorMessageF was misleading in the case of
LIBGL_DEBUG being unset, (the previous comment could be understood to
mean the error should be printed, but the code does not print in this
case).
InfoMessageF previously had no comment at all.
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
The build was broken by the line below, added in commit 4f82fed4.
s_expression.cpp:26: #include <limits>
Mesa's half of the fix is to add 'external/astl/include' to the include
path. The other half of the fix requires implementing
numeric_limits<float>::infinity() in astl, for which I have patches
submitted upstream for review.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Outputs should be treated in the same way as
inputs and temporaries here.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
If we had no vertex textures or samplers previously and we have none now,
don't bother doing the enables dance.
I was profiling nexuiz on noop and noticed these two functions in the
profile, this drops their usage from 0.86% to 0.03% and 0.23% to 0.03%
for texture and samplers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
We were doing saturate-based clamping on the [0,width] or [0,height]
coordinate, which meant only the first pixel was addressable.
Fixes piglit ARB_texture_rectangle/texwrap-RECT-bordercolor
NOTE: This is a candidate for the 8.0 release branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We should be able to merge self-move instruction into the MRF move
anyway, and this simplifies things for the next commit.
NOTE: This is a candidate for the 8.0 release branch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The HiZ op was implemented as a meta-op. This patch reimplements it by
emitting a special HiZ batch. This fixes several known bugs, and likely
a lot of undiscovered ones too.
==== Why the HiZ meta-op needed to die ====
The HiZ op was implemented as a meta-op, which caused lots of trouble. All
other meta-ops occur as a result of some GL call (for example, glClear and
glGenerateMipmap), but the HiZ meta-op was special. It was called in
places that Mesa (in particular, the vbo and swrast modules) did not
expect---and were not prepared for---state changes to occur (for example:
glDraw; glCallList; within glBegin/End blocks; and within
swrast_prepare_render as a result of intel_miptree_map).
In an attempt to work around these unexpected state changes, I added two
hooks in i965:
- A hook for glDraw, located in brw_predraw_resolve_buffers (which is
called in the glDraw path). This hook detected if a predraw resolve
meta-op had occurred, and would hackishly repropagate some GL state
if necessary. This ensured that the meta-op state changes would not
intefere with the vbo module's subsequent execution of glDraw.
- A hook for glBegin, implemented by brwPrepareExecBegin. This hook
resolved all buffers before entering
a glBegin/End block, thus preventing an infinitely recurring call to
vbo_exec_FlushVertices. The vbo module calls vbo_exec_FlushVertices to
flush its vertex queue in response to GL state changes.
Unfortunately, these hooks were not sufficient. The meta-op state changes
still interacted badly with glPopAttrib (as discovered in bug 44927) and
with swrast rendering (as discovered by debugging gen6's swrast fallback
for glBitmap). I expect there are more undiscovered bugs. Rather than play
whack-a-mole in a minefield, the sane approach is to replace the HiZ
meta-op with something safer.
==== How it was killed ====
This patch consists of several logical components:
1. Rewrite the HiZ op by replacing function gen6_resolve_slice with
gen6_hiz_exec and gen7_hiz_exec. The new functions do not call
a meta-op, but instead manually construct and emit a batch to "draw"
the HiZ op's rectangle primitive. The new functions alter no GL
state.
2. Add fields to brw_context::hiz for the new HiZ op.
3. Emit a workaround flush when toggling 3DSTATE_VS.VsFunctionEnable.
4. Kill all dead HiZ code:
- the function gen6_resolve_slice
- the dirty flag BRW_NEW_HIZ
- the dead fields in brw_context::hiz
- the state packet manipulation triggered by the now removed
brw_context::hiz::op
- the meta-op workaround in brw_predraw_resolve_buffers (discussed
above)
- the meta-op workaround brwPrepareExecBegin (discussed above)
Note: This is a candidate for the 8.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Paul Berry <stereotype441@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43327
Reported-by: xunx.fang@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44927
Reported-by: chao.a.chen@intel.com
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
If size is small (such as 1),
pitch = ROUND_DOWN_TO(MIN2(size, (1 << 15) - 1), 4);
makes pitch = 0. Then
height = size / pitch;
causes a division-by-zero exception. If pitch is zero, set height to
1 and avoid the division.
This fixes piglit's bin/getteximage-formats test and glean's
bufferObject test.
NOTE: This is a candidate for the 8.0 release branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44971
There are cases where a buffer can be mapped while another buffer is
flushed. This can happen in the CopyPixels meta-op path for piglit's
fbo-mipmap-copypix. After some discussion with Eric, it seems this
assertion is no longer necessary, and it has always been too strict.
NOTE: This is a candidate for the 8.0 branch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43328
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
This was only used by glReadPixels and glDrawPixels. Now those
functions do the corresponding error checks.
Signed-off-by: Brian Paul <brianp@vmware.com>
Basically the same story as the previous commit. But we were
already calling _mesa_source_buffer_exists() in ReadPixels().
Yeah, we were calling it twice.
Signed-off-by: Brian Paul <brianp@vmware.com>
The _mesa_error_check_format_type() function does two things: check
that format/type is legal and check that the destination (or source
buffer for glReadPixels) actually exists. Just move the relevant
parts of that into _mesa_DrawPixels().
We'll do a similar change in glReadPixels then get rid of the function
altogether.
Signed-off-by: Brian Paul <brianp@vmware.com>
This replaces the _mesa_is_legal_format_and_type() function.
According to the spec, some invalid format/type combinations to
glDrawPixels, ReadPixels and glTexImage should generate
GL_INVALID_ENUM but others should generate GL_INVALID_OPERATION.
With the old function we didn't make that distinction and generated
GL_INVALID_ENUM errors instead of GL_INVALID_OPERATION. The new
function returns one of those errors or GL_NO_ERROR.
This will also let us remove some redundant format/type checks in
follow-on commit.
v2: add more checks for ARB_texture_rgb10_a2ui at the top of
_mesa_error_check_format_and_type() per Ian.
Signed-off-by: Brian Paul <brianp@vmware.com>
Tiled surface have all kind of alignment constraint that needs to
be met. Instead of having all this code duplicated btw ddx and
mesa use common code in libdrm_radeon this also ensure that both
ddx and mesa compute those alignment in the same way.
v2 fix evergreen
v3 fix compressed texture and workaround cube texture issue by
disabling 2D array mode for cubemap (need to check if r7xx and
newer are also affected by the issue)
v4 fix texture array
v5 fix evergreen and newer, split surface values computation from
mipmap tree generation so that we can get them directly from the
ddx
v6 final fix to evergreen tile split value
v7 fix mipmap offset to avoid to use random value, use color view
depth view to address different layer as hardware is doing some
magic rotation depending on the layer
v8 fix COLOR_VIEW on r6xx for linear array mode, use COLOR_VIEW on
evergreen, align bytes per pixel to a multiple of a dword
v9 fix handling of stencil on evergreen, half fix for compressed
texture
v10 fix evergreen compressed texture proper support for stencil
tile split. Fix stencil issue when array mode was clear by
the kernel, always program stencil bo. On evergreen depth
buffer bo need to be big enough to hold depth buffer + stencil
buffer as even with stencil disabled things get written there.
v11 rebase on top of mesa, fix pitch issue with 1d surface on evergreen,
old ddx overestimate those. Fix linear case when pitch*height < 64.
Fix r300g.
v12 Fix linear case when pitch*height < 64 for old path, adapt to
libdrm API change
v13 add libdrm check
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
There is a mismatch between the way the X server and GLX library
calculates the image size for format GL_DEPTH_STENCIL(|_NV|_EXT)
See https://bugs.freedesktop.org/show_bug.cgi?id=30102
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Refine 80aa78142d "dri: make sure to build libdricommon.la"
so we don't build libdricommon if we aren't building a dri driver which needs it (i.e.
if we are just building swrast)
In particular, this restores the ability to build the swrast dri driver without having to
have a xf86drm.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
