This #include is needed for `NULL`, which is used on all OSes, not just Linux.
Reported-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Fixes: 316964709e "util: add os_read_file() helper"
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
If we don't update this for all primitive-types, we end up rendering
slightly offset points and lines up until the point where the first
triangle gets drawn. This is obviously not correct, and violates
OpenGL's repeatability rule.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: ca9c413647 ("softpipe: Respect gl_rasterization_rules in
primitive setup.")
Reviewed-By: Gert Wollny <gert.wollny@collabora.com>
Use a different arrangement of constants to allow more ffma.
A vec4 backend will now use 3 fma for yuv_to_rgb. On freedreno/ir3, it is
down from 10 to 7 alu (4 fma, 3 mul, 3 add to 7 fma). Other backends
shouldn't be hurt.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
Since softpipe doesn't truely support multisample, I've not added softpipe
to the "Enhanced per-sample shading" even though with the advertised GLSL
level ARB_gpu_shader5 is advertised.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This will enable calls to the interpolateAt* functions, but also a bunch
of other features.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Like with interpolatAtSample this is also not really implementing the
according sampling and will only work correctly for pixels that are fully
covered, but since softpipe only supports one sample this is good enough
for now.
v2: Correct spelling (Roland Scheidegger)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Since for this opcode the offsets are given manually the function
should actually also work for non-zero offsets, but the related piglits
only ever test with offset 0. Accordingly the patch satisfies
"fs-interpolateatoffset-*".
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Softpipe doesn't support more than one sample, so this function
implements the interpolation at sample 0 and adds a stub to make it
possible to interpolate at other samples.
As it is this makes the piglits "fs-interpolateatsample-*" pass, but
they only ever test sample 0 anyway.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This adds entry points for correcting the interpolation values if the
interpolation is done by using one of the interpolateAt* functions.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We will need these for per sample interpolation as well
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Now that the LOD is evaluated up front the cube faces can also be
evauate on a per sample basis instead of using the quad.
This fixes a large number of deqp gles 3 and 31 cube texture tests.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This only affects anisotropic interpolation.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This enables the use of explicit gradients.
Also remove an unused parameter when changing the interfaces.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The shadow evaluation compare parameter is stored in different locations,
depending on the texture type. Move the values to a common location free
the lod storage and to be able to reduce the number of parameters.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The value is stored in the lod components and this will be overwritten
when swithcing to the new code path.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This only adds corde that is not yet enabled.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
this is useful when we want to use explicit gradients.
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The EGL_KHR_create_context spec says:
"If an OpenGL context is requested and the values for attributes
EGL_CONTEXT_MAJOR_VERSION_KHR and EGL_CONTEXT_MINOR_VERSION_KHR,
when considered together with the value for attribute
EGL_CONTEXT_OPENGL_FORWARD_COMPATIBLE_BIT_KHR, specify an OpenGL
version and feature set that are not defined, than an
EGL_BAD_MATCH error is generated."
This case is already correctly handled a bit below in
the same source file.
The correct handling was added by commit: 63beb3df
Reported-by: Ian Romanick <idr@freedesktop.org>
Here: https://bugzilla.freedesktop.org/show_bug.cgi?id=92552#c9
Fixes: 11cabc45b7 "egl: rework handling EGL_CONTEXT_FLAGS"
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Some of the opts are not called in the general optimastion loop
in the state trackers glsl -> nir conversion. We need to call
the radeonsi specific optimisation once before scanning over
the nir otherwise we can end up gathering info on code that
is later removed.
Fixes an assert in the piglit test:
./bin/varying-struct-centroid_gles3
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Needs to update max_half_reg, or be remapped to full reg and update
max_reg accordingly, depending on generation..
Signed-off-by: Rob Clark <robdclark@chromium.org>
When discard_delayed_release is set (default), we allocate more buffers
and use a different buffer wait path.
Check if it is set, and use the old paths if not
(the alternative buffer wait path could still be used, but there is no
advantage to using it in this case).
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
thread_submit's throttling depending on the number of internal
back buffers, and wasn't affected by the driver requested
throttling value.
Now it is.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Optimize writeonly by passing PIPE_TRANSFER_WRITE
for these buffers instead of the safer
PIPE_TRANSFER_READ_WRITE.
This seems to improve the performance of d3d8 games
using d3d8to9.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
We used TGSI_SEMANTIC_FOG for fog,
however on vs/ps 3, fog is allowed to have
4 components (even on the ff pipeline according
to a wine test).
Since gallium's TGSI_SEMANTIC_FOG has only one
component, use TGSI_SEMANTIC_GENERIC instead.
Fixes:
https://github.com/iXit/Mesa-3D/issues/346
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
The shader constant buffer size with the
constant compaction code can vary depending
on the shader variant compiled (for example if
fog constants are required, etc).
Thus instead of using fixed size for the shader,
add in the variant cache the size required, pass it
to the context, and use this value.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
As with the constant compaction we map the constant
slots to new slots, we need to pass that information
to the context which is in charge of uploading
the constants.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
When indirect addressing is not used, we know exactly
which constants are accessed, and thus can
have them located in consecutive slots.
We thus parse again the shader with a slot map
for compaction.
The path contains the work inside nine_shader.c for this
path, but it needs some other commits to work, and thus
is not enabled yet by this commit.
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
