Got some int->pointer warnings and 20 is not a valid pointer ....
Fixes: 2e3a635ee6 "radv: Add an early exit in the secure compile if we already have the cache entries."
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This patch fixes approximately 39 warnings in 'texcompress_etc.c'
for the release configuration
v2: Fixed by adding the unreachable case to the etc2_rgb8_fetch_texel
( Eric Engestrom <eric.engestrom@intel.com> )
Acked-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
The resulting locale is not used for Vulkan, and it is not reference
counted, giving issues when multiple instances are created.
CC: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The resulting locale is not used for Vulkan, and it is not reference
counted, giving issues when multiple instances are created.
CC: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
The resulting locale is not used for Vulkan, and it is not reference
counted, giving issues when multiple instances are created.
CC: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Until 8bef4df196 the IR (TGSI or NIR) was used in disk_cache driver_flags.
This commit restores this features to avoid crashing when switching from
one IR to the other.
As radeonsi's default is TGSI, I used "driver_flags & 0x8000000 = 0" for TGSI
to keep the same driver_flags.
Fixes: 8bef4df196 ("radeonsi: add si_debug_options for convenient adding/removing of options")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Currently the Android build system doesn't expose the panfrost
driver.
This patch enables the panfrost driver to be build on for the
Android platform.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-By: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
nir_lower_point_size.c was not build into the libmesa_nir library for non-meson
builds. However it was included in the meson build.
This patch fixes that.
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Until now this made sense because we always paired vertex shaders
with fragment shaders, but as soon as we implement geometry and
tessellation shaders that will no longer be the case, so rename
this to (num_)used_outputs.
v2: Use 'used_outputs' instead of ns_outputs, which is more explicit (Eric).
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes the following building error:
external/mesa/src/amd/compiler/aco_spill.cpp:1768:
error: undefined reference to 'aco::lower_to_cssa(aco::Program*, aco::live&, radv_nir_compiler_options const*)'
Fixes: 0b8216b ("aco: Lower to CSSA")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
When starting a BLORP operation, we do the BTI-change flush. However,
when ending it and transitioning back to regular drawing, we change the
render target again - without a set_framebuffer_state() call. We need
to do the BTI flush there too. BLORP flags IRIS_DIRTY_RENDER_BUFFER
now, which will cause the next draw to get the BTI flush again.
(explanation of fix by Ken)
Fixes: 2b956a093a ("iris: totally untested icelake support")
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Do not need to declare it for other stages because this is for
streamout.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This make shader-db's report.py work on Haswell and earlier platforms.
The problem is that the script would detect the "sends" output for
scalar shaders and expect in in vec4 shaders too. When it didn't find
it, the script would fail with:
Traceback (most recent call last):
File "./report.py", line 351, in <module>
main()
File "./report.py", line 182, in main
before_count = before[p][m]
KeyError: 'sends'
Fixes: f192741ddd ("intel/compiler: Report the number of non-spill/fill SEND messages")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
libdrm returns -errno instead of directly the ioctl ret of -1.
Fixes: 1c3cda7d27 "radv: Add syncobj signal/reset/wait to winsys."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Observed an issue when looking at the code generatedy by the
image-vertex-attrib-input-output piglit test. Even though the test
itself worked fine (due to TIC 0 being used for the image), this needs
to be fixed.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
Unfortuantely we don't know if a particular load is a real 2d image (as
would be a cube face or 2d array element), or a layer of a 3d image.
Since we pass in the TIC reference, the instruction's type has to match
what's in the TIC (experimentally). In order to properly support
bindless images, this also can't be done by looking at the current
bindings and generating appropriate code.
As a result all plain 2d loads are converted into a pair of 2d/3d loads,
with appropriate predicates to ensure only one of those actually
executes, and the values are all merged in.
This goes somewhat against the current flow, so for GM107 we do the OOB
handling directly in the surface processing logic. Perhaps the other
gens should do something similar, but that is left to another change.
This fixes dEQP tests like image_load_store.3d.*_single_layer and GL-CTS
tests like shader_image_load_store.non-layered_binding without breaking
anything else.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "20.0" <mesa-stable@lists.freedesktop.org>
These reworks were combined into this patch:
* Matt Turner: i965: Disable NoDDChk/NoDDClr test on Gen12+
* Francisco Jerez: intel/eu/validate/gen12: Disable
qword_low_power_no_depctrl eu_validate test.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Calculated the number for allocation and did not
reserve space ....
Fixes: 2117c53b72 "radv: Add temporary datastructure for submissions."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Variables spilled on both branch legs need to be assigned to the same spilling slot.
These affinities can be transitive through multiple merge blocks.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
This patch makes the live variable analysis more precise
w.r.t. killed phi operands and the block's register pressure.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Converting to 'Conventional SSA Form' ensures correctness w.r.t. spilling of phi nodes.
Previously, it was possible that phi operands have intersecting live-ranges, and thus,
couldn't get spilled to the same spilling slot. For this reason, ACO tried to avoid to
spill phis, even if it was beneficial.
This patch implements a conversion pass which is currently only called if spilling is necessary.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes these deqp tests (and more):
dEQP-GLES2.functional.draw.draw_arrays.points.single_attribute
dEQP-GLES2.functional.draw.draw_arrays.points.multiple_attributes
dEQP-GLES2.functional.draw.draw_arrays.points.default_attribute
dEQP-GLES2.functional.draw.draw_elements.points.single_attribute
dEQP-GLES2.functional.draw.draw_elements.points.multiple_attributes
dEQP-GLES2.functional.draw.draw_elements.points.default_attribute
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The final version of previous stencil fix patch ended up breaking one-sided
stencil.
Fixes remaining failures in these deqp tests (tested on GC3000/GC7000L):
dEQP-GLES2.functional.fragment_ops.depth_stencil.*
Note: deqp tests require --deqp-gl-config-name=rgba8888d24s8ms0
Fixes: 05da025f ("etnaviv: fix two-sided stencil")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Fixes remaining failures in these deqp tests (tested on GC3000/GC7000L):
dEQP-GLES2.functional.polygon_offset.*
Fixes: 6c3c05dc ("etnaviv: fix polygon offset")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
