This is an inline function with a compile-constant switch, so I expect
the compiler wouldn't produce any better code like this, but for humans
it's easier to read when function calls are not embedded into other
function calls.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21835>
Both OpenGL and Vulkan drivers share the same performance counters.
Let's move them to a common place instead of duplicating.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21420>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Acked-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21390>
Enable support for the following extensions, which are already supported
by the driver and shared wsi code, and were just missing enables inside
v3dv_device:
VK_EXT_direct_mode_display, VK_EXT_acquire_drm_display,
VK_EXT_acquire_xlib_display.
Successfully tested on RPi 400, RaspberryPi OS 11, with X11 RandR output
leasing to lease a RandR output and use it for direct display mode.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21529>
It'll get lowered to get_ssbo_size by nir_lower_explicit_io() so the
driver should never notice this change.
Acked-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21446>
As we support VK_EXT_image_drm_format_modifier, we could receive
VK_IMAGE_ASPECT_MEMORY_PLANE_0/1/2_BIT_EXT flags.
Fixes several tests like this:
dEQP-VK.drm_format_modifiers.create_explicit_modifier.*
when using CTS 1.3.5.0
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21463>
Swap them, as suggested by @enunes, to avoid a ton of timeouts in
wayland if the x11 tests ran first.
Needs to be investigated, but at least like this we can get the CI
coverage back.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21453>
The first one in a Pass on both the rpi and the simulator, while the second
one is skipped as NotSupported on both. No idea why it's failing on the
CI, but at least it's consistently failing...
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21453>
They hang the runner, but they all pass fine on my rpi.
Will need investigating, but for now skip them.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21453>
Makes things more obvious now that we're enabling wayland as well.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21453>
Hoping that I didn't miss any, this *should* add assertions
to all functions and passes which explicitly handle 'nir_loop'.
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13962>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21210>
Currently, we postpone binning syncs until we record draw calls
and can validate if any of them require accessing protected
resources in the binning stage, however, if the draw calls are
recorded in a secondary command buffer and the barriers have
been recorded in the primary command buffer, we won't apply the
binning sync in the secondary when we record the draw calls
and so we must apply it when we execute the secondary in the
primary.
Fixes flakyness in:
dEQP-VK.api.command_buffers.record_many_draws_secondary_2
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21162>
The CLE parser in the sim will read this many bytes for each instruction
in a CL, so we should ensure we have at least that many bytes available
in the BO when reading the last instruction, otherwise we can trigger
a GMP violation. It is not clear whether this behavior applies to real
hardware too.
cc: mesa-stable
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21162>
This will be useful for RADV since it hashes the state.
v3dv changes:
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20731>
Builds on the work of !15121. This gets to delete even more code
because many drivers shared a lot of code for i2b and f2b.
No shader-db or fossil-db changes on any Intel platform.
v2: Rebase on 1a35acd8d9.
v3: Update a comment in nir_opcodes_c.py. Suggested by Konstantin.
v4: Another rebase. Remove f2b stuff from Midgard.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20509>
For the common case where we're emitting packet we don't need to
update the cl_out pointer and then store the result in cl->next,
we can directly update cl->next.
This shows a small improvement in vkoverhead's scores for basic
draw tests.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20897>
If you're only affecting one or a couple of drivers, it would be nice if
your pipeline buttons on the web UI weren't full of manual run buttons for
all the other drivers.
This is a bunch of duplicated lines, but less than it could have been now
that we have !references.
In some of these cases (i915g, nouveau, etnaviv), we have no non-manual
jobs for those drivers, so I could have just rewritten the original
"driver-rules" to "driver-manual-rules". I decided to keep things
consistent between drivers, though, because this is all esoteric enough to
readers already without making different drivers' rules look different.
Fixes: #4891
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/17445>
While we are already ensuring we allocate at least 8192 bytes should
this not be the first allocation and our allocations are typically just
a few bytes, multilayered framebuffers with large numbers of layers may
require more space than that in a single allocation.
Fixes: 3325950648 ('v3dv: increase BO allocation size when growing CLs')
Reviewed-by: Eric Engestrom <eric@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20871>
I'm going to add some automatic platform-based skips lists shortly (like
all-skips but more targeted), and this avoids needing to add them to each
.toml.
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Martin Roukala <martin.roukala@mupuf.org>
Acked-by: David Heidelberg <david.heidelberg@collabora.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20798>
Commit e07c5467 ("v3dv/format: use XYZ1 swizzle for three-component formats")
removes the only code that handled the clamp_to_transparent_black_border
variable. Therefore, the variable can be deleted, as it is not currently
being used.
Fixes: e07c5467 ("v3dv/format: use XYZ1 swizzle for three-component formats")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20746>
Note that as we are enabling the feature, we need to set the
VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT_KHR for any format
that supports STORAGE_IMAGE_BIT, from spec:
"An implementation that supports
VK_FORMAT_FEATURE_STORAGE_IMAGE_BIT for any format from the given
list of formats and supports shaderStorageImageReadWithoutFormat
must support VK_FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
for that same format if Vulkan 1.3 or the
VK_KHR_format_feature_flags2 extension is supported."
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20744>
Needed to support Vulkan feature shaderStorageImageReadWithoutFormat.
With that enabled we could receive a NONE format on a load image. For
those we treat them as 32-bit formats, that would mean that the
lowering would not need to do any format-specific unpacking.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20744>
Original patches wrote by Ella Stanforth.
Alejandro Piñeiro main changes (skipping the small fixes/typos):
* Reduced the list of supported formats to
VK_FORMAT_G8_B8_R8_3PLANE_420_UNORM and
VK_FORMAT_G8_B8R8_2PLANE_420_UNORM, that are the two only
mandatory by the spec.
* Fix format features exposed with YCbCr:
* Disallow some features not supported with YCbCr (like blitting)
* Disallow storage image support. Not clear if really useful. Even
if there are CTS tests, there is an ongoing discussion about the
possibility to remove them.
* Expose VK_FORMAT_FEATURE_COSITED_CHROMA_SAMPLES_BIT, that is
mandatory for the formats supported.
* Not expose VK_FORMAT_FEATURE_2_MIDPOINT_CHROMA_SAMPLES_BIT. Some
CTS tests are failing right now, and it is not mandatory. Likely
to be revisit later.
* We are keeping VK_FORMAT_FEATURE_2_DISJOINT_BIT and
VK_FORMAT_FEATURE_2_MIDPOINT_CHROMA_SAMPLES_BIT. Even if they
are optional, it is working with the two formats that we are
exposing. Likely that will need to be refined if we start to
expose more formats.
* create_image_view: don't use hardcoded 0x70, but instead doing an
explicit bit or of VK_IMAGE_ASPECT_PLANE_0/1/2_BIT
* image_format_plane_features: keep how supported aspects and
separate stencil check is done. Even if the change introduced was
correct (not sure about that though), that change is unrelated to
this work
* write_image_descriptor: add additional checks for descriptor type,
to compute properly the offset.
* Cosmetic changes (don't use // for comments, capital letters, etc)
* Main changes coming from the review:
* Not use image aliases. All the info is already on the image
planes, and some points of the code were confusing as it was
using always a hardcoded plane 0.
* Squashed the two original main patches. YCbCr conversion was
leaking on the multi-planar support, as some support needed
info coming from the ycbcr structs.
* Not expose the extension on Android, and explicitly assert that
we expect plane_count to be 1 always.
* For a full list of review changes see MR#19950
Signed-off-by: Ella Stanforth <estanforth@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19950>
