This is actually a false positive detected by static analyzer, because
it assumes that `device->instance->meta_cache_enabled` can change
between two execution points.
In order to instruct static analyzer this is not the case, we assing it
to a local variable, and do the checks based on that.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32819>
Declaring a variable-length array (VLA) based on a variable that can be
0 is declared dangerous.
In this case, the variable can't take value 0, so adding an assertion
fixes the issue.
This was detected by static analyzer.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32819>
While making the swapping code generic, the swap-back path was left as
is causing the wrong sources to be swapped.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Fixes: 00656526d8 ("ir3/cp: extract common src swapping code")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32920>
It's empty now, so we don't need to include it from the packer headers.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32899>
This is where those macros are used, and those are the last two
definitions preventing us from dropping panfrost-job.h.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32899>
Move MALI_EXTRACT_INDEX to pan_format.h where all format-related macros
live and kill the unused MALI_EXTRACT_TYPE and MALI_FORMAT_COMPRESSED
macros.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32899>
We use uintXX_t most of the time, so let's be consistent and use the
stdint types everywhere instead of their shorter uXX variants.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32899>
mali_ptr is no shorter than uint64_t, and we already have a few places
where we use uint64_t to store GPU virtual addresses in src/panfrost, so
let's just kill this typedef and use uint64_t types everywhere.
That's one step towards panfrost-job.h removal.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32899>
We're about to add more sysvals, and the more we add, the bigger the
sysvals region gets, which increases the amount of memory we have to
allocate when push_uniforms are dirty.
Instead of allocating FAUs for all sysvals/push_constants, track FAU
usage per-shader, and pack those. This implies emitting an FAU buffer
per stage instead of trying to share it, but that's an acceptable
trade-off.
While at it, automate the sysval dirty tracking a bit.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
Now that panvk_cmd_buffer.h is accessible from
src/panfrost/vulkan/panvk_vX_xxx.c files, there's no reason to pass
a gazillon arguments to blend_emit_descs(). We can just pass a cmdbuf
and let the helper extract the other parameters from there. It also
allows for extra automation, like dirtying the push_uniform buffer
when the new blend config reads the blend constant.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
We're about to make the sysval logic a bit more complication when
introducing push constant packing. Let's first factor-out the sysvals
handling so the JM/CSF backend don't have to duplicate the thing.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
We use blend shaders, so load_blend_const_color_rgba should
not be present in the fragment shader. We might want to re-introduce
this code if we decide to specialize fragment shaders when the
blend configuration is static, but let's drop it for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
load_vertex_id_zero_base() is supposed to return the zero-based
vertex ID, which is then offset by load_first_vertex() to get
an absolute vertex ID. At the same time, when we're in a Vulkan
environment, load_first_vertex() also encodes the vertexOffset
passed to the indexed draw.
Midgard/Bifrost have a sligtly different semantics, where
load_first_vertex() returns vertexOffset + minVertexIdInIndexRange,
and load_vertex_id_zero_base() returns an ID that needs to be offset
by this vertexOffset + minVertexIdInIndexRange to get the absolute
vertex ID. Everything works fine as long as all the load_first_vertex()
and load_vertex_id_zero_base() calls are coming from the
load_vertex_id() lowering. But as mentioned above, that's no longer
the case in Vulkan, where gl_BaseVertexARB will be turned into
load_first_vertex() and expect a value of vertexOffset in an
indexed draw context.
We thus need to fix the mismatch by introducing two new
panfrost-specific intrinsic so we can stop abusing load_first_vertex()
and load_vertex_id_zero_base().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
gl_Base{VertexARB,Instance} are signed integers, so reflect that in
the types we declare in the sysval struct.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
load_base_vertex is coming from SYSTEM_VALUE_BASE_VERTEX which should
only exist in GL. In Vulkan, gl_BaseVertex is translated to
SYSTEM_VALUE_FIRST_VERTEX, which is turned into load_first_vertex
instructions.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
bit_size should be at least 32, and alignment at least 4 bytes.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
There seems to be several lowering pass that don't take the base/range
into account, like nir_lower_mem_access_bit_sizes(). This caused
issues when we tried using it on push_constants to make sure accesses
are 32-bit aligned, so let's make sure the frontend is propagating the
base to the offset, and assigns range to zero (AKA undefined).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
This code was probably added when we were considering supporting
Vulkan on Midgard, but we don't handle the
nir_intrinsic_load_push_constant, so it make little sense to
lower push constant IOs in this backend.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
We're about to assert when .base != 0 in the Bifrost backend,
but we first make sure all push_constant users stop passing
the offset through .base.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
We just removed a lowering pass making use of these because base/range
are not updated by some other lowering passes, so let's not encourage
future use of base/range by keeping them set to zero.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
The vulkan driver is now lowering push constant dynamic indexing to
global loads, so we can get rid of this pass.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
The csel-ladder we have in bi_lower_load_push_const_with_dyn_offset()
is not great, and is relying on base/range being valid. It turns out
nir_lower_mem_access_bit_sizes(), which we rely on to make push constant
accesses 32-bit aligned, doesn't preserve those when splitting accesses.
Let's simplify the thing by lowering push constant accesses with a
dynamic offset to global loads.
We also reset the base and offset values in the lowering pass, to make
sure the backend doesn't rely on them for other things.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
We're about to drop the dynamic push_constant lowering pass,
but first we must patch all the bits relying on it.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
Emitting nir_load_push_constant() calls with the right base/range/offset
for sysvals is tedious and error prone. Provide syntactic sugar macros
to automate that.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
The sysval base comes from the amount of FAU words we reserve for user
push constants, and the range is capped by the sysval struct size.
Add macros to express that instead of using magics values.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
This allows us to do the validation after each step instead of once at
the end.
Since validation is done in nir_lower_descriptors(), we no longer
need to do it panvk_lower_nir(), and we don't need to return
progress information either. So adjust the prototype of
nir_lower_descriptors() accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32415>
For Xe3+, set preferred SLM and SLM per threadgroup size.
Bspec: 73211
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32872>
This is required to optimize FP64 and Int64 shaders generated by
virglrenderer. It generates pack/unpack around every 64-bit op,
which NIR currently can't eliminate. This fixes that.
There is a new constraint ".y", which means that the use of an instruction
should have swizzle.y. This allows us to add patterns that have Y swizzle
on results of instructions.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32172>
Currently marge will ignore an error message if it is just the word
"error" without any further information. However, if she never finds a
more informative message, then she will just print that meaningless
error message.
Instead of an empty error message, just leave the message blank.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32773>
If marge doesn't find deqp-runner results or trace errors, she will parse
a failed job log for error messages. The parsing ignores certain phrases
in an attempt to find more relevant errors.
Add a test to check marge's error log parsing to make sure that we don't
create regressions when adding new phrases to ignore.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32773>
Currently, if the pipeline_message script runs in an an env missing the
aiohttp package, the pipeline_message script will throw a
ModuleNotFoundError and crash marge.
Make sure to catch and ignore these errors since the pipeline message
should never interfere with a merge request.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/32773>
