The binding is checked against the limits later in the function, so we
need to make sure we don't overflow before the check here.
Fixes this valgrind warning (and sometimes segfault):
==1460== Invalid write of size 4
==1460== at 0x74C98DD: ast_declarator_list::hir(exec_list*, _mesa_glsl_parse_state*) (ast_to_hir.cpp:4943)
==1460== by 0x74C054F: _mesa_ast_to_hir(exec_list*, _mesa_glsl_parse_state*) (ast_to_hir.cpp:159)
==1460== by 0x7435C12: _mesa_glsl_compile_shader (glsl_parser_extras.cpp:2130)
in
dEQP-GLES31.functional.debug.negative_coverage.get_error.compute.
exceed_atomic_counters_limit
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Section 3.7 (Identifiers) of the GLSL spec says:
However, as noted in the specification, there are some cases where
previously declared variables can be redeclared to change or add
some property, and predeclared "gl_" names are allowed to be
redeclared in a shader only for these specific purposes. More
generally, it is an error to redeclare a variable, including those
starting "gl_".
This patch should fix piglit tests:
clip-distance-redeclare-without-inout.frag
clip-distance-redeclare-without-inout.vert
However, this causes a regression in
clip-distance-out-values.shader_test. A fix for that test has been sent
to the piglit list for review:
https://patchwork.freedesktop.org/patch/255201/
As far as I understood following mailing thread:
https://lists.freedesktop.org/archives/piglit/2013-October/007935.html
looks like we have accepted to remove an ability to change qualifiers
but have not done it yet. Unless I missed something)
v2 (idr): Move 'earlier->data.mode != var->data.mode' test much earlier
in the function. Add special handling for gl_LastFragData.
Signed-off-by: Andrii Simiklit <andrii.simiklit@globallogic.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Use #pragma warning(off) and #pragma warning(on) to disable or enable
all warnings. This is a big hammer. If we ever need a smaller hammer,
we can enhance this functionality.
There is one lame thing about this. Because we parse everything, create
an AST, then convert the AST to GLSL IR, we have to treat the #pragma
like a statment. This means that you can't do something like
' void
' #pragma warning(off)
' __foo
' #pragma warning(on)
' (float param0);
Fixing that would, as far as I can tell, require a huge amount of work.
I did try just handling the #pragma during parsing (like we do for
state for the whole shader.
v2: Fix the #pragma lines in the commit message that git-commit ate.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The GLSL 4.6 specification (section 4.1.14. "Implicit Conversions")
says:
"There are no implicit array or structure conversions. For
example, an array of int cannot be implicitly converted to an
array of float."
So let's add a check in place when assigning array initializers to
implicitly sized arrays, to avoid incorrectly allowing code on the
form:
int[] foo = float[](1.0, 2.0, 3.0)
This fixes the following dEQP test-cases:
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_float_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_uint_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.int_to_uint_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.uint_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es31.invalid.arrays.uint_to_float_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_float_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_uint_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.int_to_uint_fragment
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.uint_to_float_vertex
- dEQP-GLES31.functional.shaders.implicit_conversions.es32.invalid.arrays.uint_to_float_fragment
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This makes the code a bit easier to read, as well as reduces repetition,
especially when we add support for EXT_shader_implicit_conversions.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This makes the code a bit easier to read, as well as will reduce
repetition when we add support for EXT_shader_implicit_conversions.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Adding compile time check for subroutine functions with
the same names. Similar check for intrastage linking was already
landed in commit 5f0567a4f6.
From Section 6.1.2 (Subroutines) of the GLSL 4.00 specification
"A program will fail to compile or link if any shader
or stage contains two or more functions with the same
name if the name is associated with a subroutine type."
Fixes:
* no-overloads.vert
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108109
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
do_assignment validated assigment but when rhs type was not compatible
it proceeded without issues and returned error_emitted = false.
On the other hand process_initializer expected do_assignment to always
return compatible type and never fail.
As a result when variable was initialized with incompatible type
the type of variable changed to the incompatible one.
This manifested in unnecessary error messages and in one case in crash.
Example GLSL:
vec4 tmp = vec2(0.0);
tmp.z -= 1.0;
Past error messages:
initializer of type vec2 cannot be assigned to variable of type vec4
invalid swizzle / mask `z'
type mismatch
operands to arithmetic operators must be numeric
After this patch:
initializer of type vec2 cannot be assigned to variable of type vec4
In the other case when we initialize variable with incompatible struct,
accessing variable's field leaded to a crash. Example:
uniform struct {float field;} data;
...
vec4 tmp = data;
tmp.x -= 1.0;
After the patch there is only error line without a crash:
initializer of type #anon_struct cannot be assigned to variable of
type vec4
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107547
Return ir_rvalue::error_value with ast_post_inc, ast_post_dec if
parser error was emitted previously. This way process_array_size
won't see bogus IR generated like with commit 9c676a6427.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98699
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This extension provides new GLSL built-in functions
beginInvocationInterlockARB() and endInvocationInterlockARB()
that delimit a critical section of fragment shader code. For
pairs of shader invocations with "overlapping" coverage in a
given pixel, the OpenGL implementation will guarantee that the
critical section of the fragment shader will be executed for
only one fragment at a time.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
- remove mtypes.h from most header files
- add main/menums.h for often used definitions
- remove main/core.h
v2: fix radv build
Reviewed-by: Brian Paul <brianp@vmware.com>
OpenCL kernels also have int8/uint8.
v2: remove changes in nir_search as Jason posted a patch for that
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
This allows the application to request framebuffer fetch coherency
with per-fragment output granularity. Coherent framebuffer fetch
outputs (which is the default if no qualifier is present for
compatibility with older versions of the EXT_shader_framebuffer_fetch
extension) will have ir_variable_data::memory_coherent set to true.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
At the same point where it is initialized on GL(ES) 3.0+ so we can
implement some common layout qualifier handling in a future commit.
Until now the fb_fetch_output flag would be inherited from the
original implicit gl_LastFragData declaration at a later point in the
AST to GLSL IR translation.
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
None of these are necessary because result->type is the only thing used
outside the giant switch-statement.
CID: 1230983, 1230984
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Adds new INT16, UINT16 and FLOAT16 base types.
The corresponding GL types for half floats were reused from the
AMD_gpu_shader_half_float extension. The int16 and uint16 types come from
NV_gpu_shader_5 extension.
This adds the builtins and the lexer support.
To avoid a bunch of warnings due to cases not handled in switch, the
new types have been added to a few places using same behavior as
their 32-bit counterparts, except for a few trivial cases where they are
already handled properly. Subsequent patches in this set will provide
correct 16-bit implementations when needed.
v2: * Use FLOAT16 instead of HALF_FLOAT as name of the base type.
* Removed float16_t from builtin types.
* Don't copy 16-bit types as if they were 32-bit values in
copy_constant_to_storage().
* Use get_scalar_type() instead of adding a new custom switch
statement.
(Jason Ekstrand)
v3: Use GL_FLOAT16_NV instead of GL_HALF_FLOAT for consistency
(Ilia Mirkin)
v4: Add missing 16-bit base types support in glsl_to_nir (Eduardo Lima).
v5: Fix coding style (Topi Poholainen).
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
According to the GLSL ES 3.20, GLSL 4.50, and GLSL 1.20 specs:
"To force all output variables to be invariant, use the pragma
#pragma STDGL invariant(all)
before all declarations in a shader."
Notably, this is only supposed to affect output variables. Furthermore,
"Only variables output from a shader can be candidates for invariance."
It looks like this has been wrong since we first supported the pragma in
2011 (commit 86b4398cd1).
Fixes dEQP-GLES2.functional.shaders.preprocessor.pragmas.pragma_fragment.
v2: Now that all cases are identical (other than compute shaders, which
have no output variables anyway), we can drop the switch statement
entirely. We also don't need the current_function == NULL check;
this was a hold over from when we had a single var_mode_out for both
function parameters and shader varyings, in the bad old days.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: 94d669b0d2 ("glsl: enforce fragment shader input restrictions in
GLSL ES 3.10")
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
NIR does not have these instructions. TGSI and Mesa IR both implement
them using < and >=, repsectively. Removing them deletes a bunch of
code and means I don't have to add code to the SPIR-V generator for
them.
v2: Rebase on 2+ years of change... and fix a major bug added in the
rebase.
text data bss dec hex filename
8255291 268856 294072 8818219 868e2b 32-bit i965_dri.so before
8254235 268856 294072 8817163 868a0b 32-bit i965_dri.so after
7815339 345592 420592 8581523 82f193 64-bit i965_dri.so before
7813995 345560 420592 8580147 82ec33 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Without the lexer changes, tests/glslparsertest/glsl2/tex_rect-02.frag
fails. Before this change, the parser would determine that
sampler2DRect is not a valid type because the call to
state->symbols->get_type() in ast_type_specifier::glsl_type() would
return NULL. Since ast_type_specifier::glsl_type() is now going to
return the glsl_type pointer that it received from the lexer, it doesn't
have an opportunity to generate an error.
text data bss dec hex filename
8255243 268856 294072 8818171 868dfb 32-bit i965_dri.so before
8255291 268856 294072 8818219 868e2b 32-bit i965_dri.so after
7815195 345592 420592 8581379 82f103 64-bit i965_dri.so before
7815339 345592 420592 8581523 82f193 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Instead of generating a sequence like:
run_default = true;
if (i == 3) // some label that appears after default
run_default = false;
if (i == 4) // some label that appears after default
run_default = false;
...
if (run_default) {
...
}
generate something like:
run_default = !((i == 3) || (i == 4) || ...);
if (run_default) {
...
}
This eliminates one use of conditional assignment, and it enables the
elimination of another.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Previously the instruction stream was walked looking for comparisons
with case-label values. This should generate nearly identical code.
For at least fs-default-notlast-fallthrough.shader_test, the code is
identical.
This change will make later changes possible.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The values being compared are scalars, so these are the same. While
I'm here, simplify the run_default condition to just deref the flag
(instead of comparing a scalar bool with true).
There is a bit of extra change in this patch. When constructing an
ir_binop_equal ir_expression, there is an assertion that the types are
the same. There is no such assertion for ir_binop_all_equal, so
passing glsl_type::uint_type with glsl_type::int_type was previously
fine. A bunch of the code motion is to deal with that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This happens to work now because ir_binop_all_equal is used. This
causes vector typed init-expressions to produce scalar Boolean values
after comparison.
The next commit changes ir_binop_all_equal to ir_binop_equal. Vector
typed init-expressions will then produce vector Boolean values, and, in
debug builds, the ir_assignment constructor will fail an assertion.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
It leads to surprising states with integer inputs and outputs on
vertex processing stages (e.g. geometry stages). Instead, rely on the
driver to choose smooth interpolation by default.
We still allow varyings to match when one stage declares it as smooth
and the other declares it without interpolation qualifiers.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
In GLSL ES 3.10 session 4.9 [Memory Access Qualifiers], it has the
following description:
"A variable could be qualified as both readonly and writeonly,
disallowing both read and write, but still be passed to
imageSize() to have the size queried.".
This is for image variable, but not for buffer variables.
According to https://github.com/KhronosGroup/OpenGL-API/issues/7 Khronos
intent is to allow both readonly and writeonly in buffer variables, and
as such it will update the GLSL specification.
This commit address this issue, and fixes:
KHR-GL{43,44,45}.shader_storage_buffer_object.basic-readonly-writeonly
KHR-GLES31.core.shader_storage_buffer_object.basic-readonly-writeonly
v2: set correctly fields[i] memory flags (Samuel Pitoiset).
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
After get_variable_being_redeclared() has been called, it is no longer
safe to access the original variable pointer, since its memory might have
been freed.
Since callers of this function should only be accessing the variable pointer
returned by the function, avoid potential bugs by re-assigning the
original variable pointer to the result of the function call,
making it impossible for the remaining code to access an invalid variable
pointer.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
get_variable_being_redeclared() can delete the original variable
in a specific scenario. The code sets it to NULL after this so other
code in that same function doesn't try to access trashed memory after
the fact, however, the copy of that variable in the caller code
won't see any of this making it very easy to overlook.
Make the function a bit safer by taking a pointer to the original
variable so we can also make NULL the caller's pointer to the variable
if this function deletes it.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Since the original 'var' might have been deleted from this point forward.
Bugzila: https://bugs.freedesktop.org/show_bug.cgi?id=102685
Fixes: 51bf007d2c (glsl: Disallow unsized array of atomic_uint)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This was a bugfix to the spec addressed in OpenGL 4.5 (revision
7 of the spec) and there is a CTS test to check this.
Fixes:
KHR-GL45.shader_atomic_counters.negative-unsized-array
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We continue in the code to do some more things with the rhs, including
setting a constant initializer. If the type is wrong, this causes some
confusion down the line, leading to assertions. This makes sure that the
rhs processing continues to flow as-if the type was correct to start
with (even though the state has been marked as an error state).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101766
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
The main motivation for this is that threaded compilation can fall
over if we were to allocate IR inside constant_expression_value()
when calling it on a builtin. This is because builtins are shared
across the whole OpenGL context.
f81ede4699 worked around the problem by cloning the entire
builtin before constant_expression_value() could be called on
it. However cloning the whole function each time we referenced
it lead to a significant reduction in the GLSL IR compiler
performance. This change along with the following patch
helps fix that performance regression.
Other advantages are that we reduce the number of calls to
ralloc_parent(), and for loop unrolling we free constants after
they are used rather than leaving them hanging around.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When we have an interface block like:
layout (xfb_buffer = 0, xfb_offset = 0) out Block {
vec4 var1;
layout (xfb_stride = 48) vec4 var2;
vec4 var3;
};
According to ARB_enhanced_layouts spec:
"The *xfb_stride* qualifier specifies how many bytes are consumed by
each captured vertex. It applies to the transform feedback buffer
for that declaration, whether it is inherited or explicitly
declared. It can be applied to variables, blocks, block members, or
just the qualifier out. [ ...] While *xfb_stride* can be declared
multiple times for the same buffer, it is a compile-time or
link-time error to have different values specified for the stride
for the same buffer."
This means xfb_stride actually applies to the buffer, and not to the
individual components.
In the above example, it means that var2 consumes 16 bytes, and var3 is
at offset 32.
This has been confirmed also by John Kessenich, the main contact for the
ARB_enhanced_layouts specs, and also because this commit fixes:
GL45.enhanced_layouts.xfb_block_member_stride
This commit is in practice a revert of 598790e856 (glsl: apply
xfb_stride to implicit offsets for ifc block members).
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
From the ARB_uniform_buffer_object spec:
""shared" uniform blocks, the default layout, ..."
This doesn't fix anything as the default layout is already applied
at this point but fixes the misleading code/comment.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This was added in 2d03f48a65 and seems like it was intended
as a TODO comment in a function stub rather than a useful
code comment.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
_mesa_glsl_has_builtin_function is used to determine whether any variant
of a builtin are available, for the purpose of enforcing the GLSL ES
3.00+ rule that overloads or overrides of builtins are disallowed.
However the builtin_builder contains information on all builtins,
irrespective of parse state, or versions, or extension enablement. As a
result we would say that a builtin existed even if it was not actually
available.
To resolve this, first check if at least one signature is available for
a builtin before returning true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101666
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This changes the logic during the conversion of the declaration list
struct S {
...
} v;
from AST to IR, but should not change the end result.
When assigning the type of v, instead of looking `S' up in the symbol
table, we read the type from the member variable of ast_struct_specifier.
This change is necessary for the subsequent change to how anonymous types
are handled.
v2: remove a type override when redefining a structure; should be
the same type in that case anyway
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
