v2: - Make -Dlmsensors=false work
- Simplify auto and true cases
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
When we look up the DRI drawable state we need to associate an fbconfig
with the drawable. With GLX_EXT_no_config_context we can no longer infer
that from the context and must instead query the server.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This also fixes a bug, the error path through MakeCurrent didn't
translate the error code by the extension's error base.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The dummy vtable has these slots as NULL already, no need to check for
the dummy context explicitly.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
The implementation is a simple 'return EGL_FALSE'. Stop pretending and
simply remove it.
Note: the removal of XMesa API is fine, since there hasn't been any
users for it in years.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The extension was never implemented and seemingly never will.
The DRI based libGL dropped support for it over 10 years ago.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The extension was never implemented and seemingly never will.
The DRI based libGL dropped support for it over 10 years ago.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I believe the workaround describes that the MI_LOAD_REGISTER_IMM should
come right after the 3DSTATE_SAMPLE_PATTERN.
This fixes GPU hangs in the i965 initial state batchbuffer when running
some Piglit tests with always_flush_batch=true.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On CNL, we see multiple multisample failures on piglit tests. By
emitting this extra state, though not documented in the bspec, those
failures seem to go away.
This workaround could be removed if we ever find out a better solution,
but it should be good enough for now.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In this condition dri2_dpy->driver_name string always equals
NULL, so call to free() is useless
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
deviceName string is declared, assigned and freed but actually
never used in dri3_create_screen() function.
Fixes: 2d94601582 ("Add DRI3+Present loader")
Signed-off-by: Vadym Shovkoplias <vadym.shovkoplias@globallogic.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
"vkAllocateCommandBuffers can be used to create multiple command
buffers. If the creation of any of those command buffers fails, the
implementation must destroy all successfully created command buffer
objects from this command, set all entries of the pCommandBuffers
array to NULL and return the error."
This has been suggested by gabriel@system.is.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's really annoying and this pollutes the output especially
when a bunch of non-meta shaders are compiled.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This just builds on the image support. Evergreen only has ssbo
for fragment and compute no other stages.
v2: handle images and ssbo in the same shader properly (Ilia)
v3: fix RESQ on buffers,
fix missing atom emit
fix first element offset
use R32 format
write separate buffer rat store path.
(from running deqp gles3.1 tests)
Signed-off-by: Dave Airlie <airlied@redhat.com>
On cayman it appears the cmp component is now in Z.
Fixes:
arb_shader_image_load_store-dead-fragments on cayman.
Signed-off-by: Dave Airlie <airlied@redhat.com>
These didn't handle the TGSI at all properly, this fixes
them to use the common path for 64->32 then adds the 32->int
on at the end.
Fixes:
generated_tests/spec/arb_gpu_shader_fp64/execution/conversion/*
Signed-off-by: Dave Airlie <airlied@redhat.com>
The idea is ported from RadeonSI, but using 512x512 instead of
256x256 seems slightly better. This improves dota2 performance
by +2%.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
The state no longer exists on GFX9.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fix incomplete check of input params in blorp_surf_convert_to_uncompressed()
which can lead to NULL pointer dereferencing.
Fixes: 5ae8043fed ("intel/blorp: Add an entrypoint for doing
bit-for-bit copies")
Fixes: f395d0abc8 ("intel/blorp: Internally expose
surf_convert_to_uncompressed")
Reviewed-by: Emil Velikov <emli.velikov@collabora.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
This fixes issues seen with certain versions of Unreal Engine 4 editor
and games built with that using GLSL 4.30.
v2: add driinfo_gallium change (Emil Velikov)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97852
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103801
Acked-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
64-bit pull loads are implemented by emitting 2 separate
32-bit pull load messages, where the second message loads from
an offset at +16B.
That addition of 16B to the original offset should not alter the
original offset register used as source for the pull load instruction
though, since the compiler might use that same offset register in other
instructions (for example, for other pull loads in the shader code
that take that same offset as reference).
If the pull load is 32-bit then we only need to emit one message and
we don't need to do offset calculations, but in that case the optimizer
should be able to drop the redundant MOV.
Fixes the following test on Haswell:
KHR-GL45.gpu_shader_fp64.fp64.max_uniform_components
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103007
Prepare for two texture handling paths, the descriptor-based
path will be added in a future commit. These are structured
so that the texture implementation handles its own state
emission.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This needs to be shared between texture_plain and texture_desc.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
This will be shared with the texture descriptor path.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Need this to efficiently emit texture descriptor invalidations.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Track varying component offset of the point size output, as well as
provide the offset of the point coord input.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Update state objects to add new state, and emit function to emit new
state.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
- This core must load shaders from memory (AFAIK)
- Yet another new location for UNIFORMS
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Update context reset for HALTI3..HALTI5, sorting states for the HALTI
version that has them.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
RS align is not necessary and might even be harmful when using the BLT
engine for blitting.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Add an implemenation of key clear_blit functions using the BLT engine
that replaced the RS on GC7000.
Also set level->size correctly for imported resources. This is important
for the BLT resolve-in-place path to work for them.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Prepare for BLT-based blitting path by moving RS-based
blitting to the RS implementation file, making this
self-contained.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Want to be able to emit state from the texture implementation,
and the blitter implementation.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
When the BLT is involved as source or target, add an extra BLT
enable/disable sequence around the sync sequence.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The blob does this, as DRAW_INSTANCED can replace fully all the other
draw commands. It is also required to handle integer vertex formats.
The other path is only there for compatibility and might go away (or at
least rot to become buggy due to dis-use) in newer hardware.
As a by-effect this changes the behavior for GC3000-, by no longer using
the index offset for DRAW_INDEXED but instead adding it to INDEX_ADDR.
This should make no difference.
Preparation for GC7000 support.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
This is used by HALTI2+ (GC3000+) when drawing with DRAW_INSTANCED.
It is also necessary when switching between integer and floating point
vertex element formats.
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
We're about to add more of them, and need to pass the whole lot of them
around together when growing them. Putting them in a struct makes this
much easier.
brw->batch.batch.bo is a bit of a mouthful, but it's nice to have things
labeled 'batch' and 'state' now that we have multiple buffers.
Fixes: 2dfc119f22 "i965: Grow the batch/state buffers if we need space and can't flush."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103101
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
