State trackers will not use the new param directly, but will instead use
a helper in MakeCurrent that does the right thing.
v2: rework the interface
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v2)
Calling this function will emit a fence signal operation into the
GPU's command stream.
v2: documentation typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
An fd can potentially have different types of objects backing it.
Specifying the type helps us make sure we treat the FD correctly.
This is in preparation to allow importing syncobj fence FDs in addition
to native sync FDs.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This API binds atomic buffers for all bound shaders (as per the
GL semantics).
This is needed to support cross shader hw atomic counters.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-By: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
r600 expects the context that created the sampler view to still be alive
(there is a per-context list of sampler views).
svga currently bails when the context of destruction is not the same as
creation.
The GL state tracker, which is the only one that runs into the
multi-context subtleties (due to share groups), already guarantees that
sampler views are destroyed before their context of creation is destroyed.
Most drivers are context-agnostic, so the warning message in
pipe_sampler_view_release doesn't really make sense.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
pipe_draw_info::indexed is replaced with index_size. index_size == 0 means
non-indexed.
Instead of pipe_index_buffer::offset, pipe_draw_info::start is used.
For indexed indirect draws, pipe_draw_info::start is added to the indirect
start. This is the only case when "start" affects indirect draws.
pipe_draw_info::index is a union. Use either index::resource or
index::user depending on the value of pipe_draw_info::has_user_indices.
v2: fixes for nine, svga
For lower memory usage and more efficient updates of the buffer residency
list. (e.g. if drivers keep seeing the same buffer for many consecutive
"add" calls, the calls can be turned into no-ops trivially)
v2: add const_uploader, add documentation
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Tested-by: Charmaine Lee <charmainel@vmware.com>
This is so that we can differentiate between flushing any framebuffer
reading caches from regular sampler caches.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This enables gallium support for EGL_ANDROID_native_fence_sync, for
drivers which support PIPE_CAP_NATIVE_FENCE_FD.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This will be needed for explicit synchronization with devices outside
the gpu, ie. EGL_ANDROID_native_fence_sync.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v1 → v2:
- Fixed indentation (noted by Brian Paul)
- Removed second assert from nouveau's switch statements (suggested by
Brian Paul)
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The pipelined hang detection mode will not want to dump everything.
(and it's also time consuming) It will only dump shaders after a draw call
and then dump the status registers separately if a hang is detected.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
to reduce the call indirections with u_resource_vtbl.
The worst call tree you could get was:
- u_transfer_inline_write_vtbl
- u_default_transfer_inline_write
- u_transfer_map_vtbl
- driver_transfer_map
- u_transfer_unmap_vtbl
- driver_transfer_unmap
That's 6 indirect calls. Some drivers only had 5. The goal is to have
1 indirect call for drivers that care. The resource type can be determined
statically at most call sites.
The new interface is:
pipe_context::buffer_subdata(ctx, resource, usage, offset, size, data)
pipe_context::texture_subdata(ctx, resource, level, usage, box, data,
stride, layer_stride)
v2: fix whitespace, correct ilo's behavior
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Acked-by: Roland Scheidegger <sroland@vmware.com>
Be consistent with the rest of the "set_xyz" state interfaces.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Window rectangles apply to all framebuffer operations, either in
inclusive or exclusive mode. They may also be specified as part of a
blit operation.
In exclusive mode, any fragment inside any of the specified rectangles
will be discarded.
In inclusive mode, any fragment outside every rectangle will be
discarded.
The no-op state is to have 0 rectangles in exclusive mode.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Even when begin_query succeeds, there can still be failures in query handling.
For example for radeon, additional buffers may have to be allocated when
queries span multiple command buffers.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Make them akin to shader buffers, with no refcounting/etc. Just used to
pass data about the bound image in ->set_shader_images.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This introduces pipe_grid_info which contains all information to
describe a launch_grid call. This will be used to implement indirect
compute in the same fashion as indirect draw.
Changes from v2:
- correctly initialize pipe_grid_info for nv50/nvc0
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Since the GREMEDY extensions are normally only exposed by the gremedy
debugger (and could possibly trigger debug paths in the app), we don't
expose the extension by default, but instead only with
ST_DEBUG=gremedy.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This patch adds a new interface to support hardware mipmap generation.
PIPE_CAP_GENERATE_MIPMAP is added to allow a driver to specify
if this new interface is supported; if not supported, the state tracker will
fallback to mipmap generation by rendering/texturing.
v2: add PIPE_CAP_GENERATE_MIPMAP to the disabled section for all drivers
v3: add format to the generate_mipmap interface to allow mipmap generation
using a format other than the resource format
v4: fix return type of trace_context_generate_mipmap()
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
It makes sense to re-use pipe->invalidate_resource for the purpose of
glInvalidateBufferData, but this function is already implemented in vc4
where it doesn't have the expected behavior. So add a capability flag
to indicate that the driver supports the expected behavior.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some drivers (in particular radeon[si], but also freedreno judging from
a quick grep) may want to expose performance counters that cannot be
individually enabled or disabled.
Allow such drivers to mark driver-specific queries as requiring a new
type of batch query object that is used to start and stop a list of queries
simultaneously.
v3: adjust recently added nv50 queries
v2: documentation for create_batch_query
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This will allow gallium drivers to send messages to KHR_debug endpoints
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The VMware svga driver doesn't directly support pipe_screen::get_timestamp()
but we can do a work-around. However, we need a gallium context to do so.
This patch adds a new pipe_context::get_timestamp() function that will only
be called if the pipe_screen::get_timestamp() function is NULL.
Signed-off-by: Brian Paul <brianp@vmware.com>
Nowhere was it spelled out that the state tracker may expect the pipe
driver to unref the old fence.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
