Intel's blending hardware does not properly return 1.0 for destination
alpha for RGBX formats; it requires the factors to be overridden to
either zero or one. Broadcom vc4 and v3d also could use this override.
While overriding these factors is safe in general, Nouveau and Radeon
would prefer not to. Their blending hardware already returns correct
values for RGB/RGBX formats, and would like to avoid the resulting
per-buffer blending and independent blend factors (rgb != a) since it
can cause additional overhead.
I considered simply handling this in the driver, but it's not as nice.
pipe_blend_state doesn't have any format information, so we'd need the
hardware blend state to depend on both pipe_blend_state and
pipe_framebuffer_state. Furthermore, Intel GPUs don't have a native
RGBX_SNORM format, so I avoid exposing one, which makes Gallium fall
back to RGBA_SNORM. The pipe_surfaces we get in the driver have an RGBA
format, making it impossible to tell that there shouldn't be an alpha
channel. One could argue that st not handling it in that case is a bug.
To work around this, we'd have to expose RGBX pipe formats, mapped to
RGBA hardware formats, and add format swizzling special cases. All
doable, but it ends up being more code than I'd like.
st_atom_blend already has access to the right information and it's
trivial to accomplish there, so we just add a cap bit and do that.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Gallium historically has treated pipeline statistics queries as a single
query, PIPE_QUERY_PIPELINE_STATISTICS, which returns a block of 11
values. This was originally patterned after the D3D1x API. Much later,
Brian introduced an OpenGL extension that exposed these counters - but
it exposes 11 separate queries, each of which returns a single value.
Today, st/mesa simply queries all 11 values, and returns a single value.
While pipeline statistics counters aren't typically performance
critical, this is still not a great fit. A D3D1x->GL translator might
request all 11 counters by creating 11 separate GL queries...which
Gallium would map to reads of all 11 values each time, resulting in a
total 121 counter reads. That's not ideal.
This patch adds a new cap, PIPE_CAP_QUERY_PIPELINE_STATISTICS_SINGLE,
and corresponding query type PIPE_QUERY_PIPELINE_STATISTICS_SINGLE.
When calling create_query(), q->index should be set to one of the
PIPE_STAT_QUERY_* enums to select a counter. Unlike the block query,
this returns the value in pipe_query_result::u64 (as it's a single
value) instead of the pipe_query_data_pipeline_statistics group.
We update st/mesa to expose ARB_pipeline_statistics_query if either
capability is set, preferring the new SINGLE variant when available.
Thanks to Roland, Ilia, and Marek for helping me sort this out.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Make sure that the next line starts with spaces so that bullets are
maintained throughout, add `` around a few more special tokens, and fix
SAMPLE_COUNT_TEXTURE -> SAMPLE_COUNT.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
ATOMFADD is a little special -- make drivers have to specify it
explicitly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is supported by at least NVIDIA hardware, and exposeable via GL
extensions.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This new pipe cap and the new nr_samples field in pipe_surface lets a
state tracker bind a render target with a different sample count than
the resource. This allows for implementing
EXT_multisampled_render_to_texture and
EXT_multisampled_render_to_texture2.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Introduce a new capability for the maximum value of
pipe_vertex_element::src_offset. Initially just every driver
backend returns the value previously set from _mesa_init_constants.
So this shall end up in no functional change.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
This moves the evergreen-specific max-sizes out as a driver-cap, so
other drivers with less strict requirements also can use hw-atomics.
Remove ssbo_atomic as it's no longer needed.
We should now be able to use hw-atomics for some stages and not for
other, if needed.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This gets rid of a r600 specific hack in the state-tracker, and prepares
for other drivers to be able to use hw-atomics.
While we're at it, clean up some indentation in the various drivers.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Some hardware can do PIPE_TEX_WRAP_MIRROR_REPEAT but not
PIPE_TEX_WRAP_MIRROR_CLAMP and PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER.
Drivers for such hardware would like to advertise support for
ARB_texture_mirror_clamp_to_edge but not EXT_texture_mirror_clamp.
This commit adds a new PIPE_CAP_TEXTURE_MIRROR_CLAMP_TO_EDGE bit,
changes the extension enable to be based on that, and enables it
in all upstream drivers which supported PIPE_CAP_TEXTURE_MIRROR_CLAMP
(so they continue supporting this mode).
This commit does not add support for the opcodes in gallivm or tgsi_to_nir.c
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
v1 -> v2:
- nv30 is _NOT_ scalar as suggested by Ilia Mirkin.
- Change from a screen cap to a shader cap as suggested
by Eric Anholt.
- radeonsi is scalar as suggested by Marek Olšák.
- Change missing ones to be scalar.
v2 -> v3:
- r600 prefers vec4 as suggested by Marek Olšák.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v2)
Nobody queries these and nobody sets them to anything useful,
the docs say TODO.
Drop them until a use appears.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Calling this function will emit a fence signal operation into the
GPU's command stream.
v2: documentation typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
The sample mask is used even if msaa is not explicity enabled when we
have a framebuffer with multisampled surfaces. That's DX behavior and
what the Radeon drivers do. Not sure about other drivers at this point.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This API binds atomic buffers for all bound shaders (as per the
GL semantics).
This is needed to support cross shader hw atomic counters.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-By: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for a hw atomic counters to TGSI.
A new register file for storing atomic counters is added,
along with a new atomic counter semantic, along with docs
for both.
v2: drop semantic, move hw counter to backend,
Ilia pointed out SSO would have busted my plan, and he
was right.
v3: drop BUFFER decls. (Marek)
v3.1: minor fixups for whitespace, set ureg error
if we overflow the hw atomic limits. (nha)
v3.2: fix some docs inconsistencies (Ilia)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-By: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This looks like an evergreen specific feature, but with atomic
counters AMD have hw specific counters they use instead of operating
on buffers directly. These are separate to the buffer atomics,
so require different limits and code paths.
I've left the CAP for atomic type extensible in case someone
else has a variant on this sort of thing (freedreno maybe?)
and needs to change it.
This adds all the CAPs required to add support for those atomic
counters, along with a related CAP for limiting the number of
output resources.
I'd like to land this and the st patch then I can start to
upstream the evergreen support for these and other GL4.x features.
v2: drop the ATOMIC_COUNTER_MODE cap, just use the return
from the HW counters. If 0 we use the current mode.
v3: fix some rebase errors (Gert Wollny)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-By: Gert Wollny <gw.fossdev@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These bits are intended to be used by the ddebug hang detection and are
named in analogy to the Vulkan stage bits (and the corresponding Radeon
pipeline event).
Hang detection needs fences on the granularity of individual commands,
which nothing else really covers. The closest alternative would have
been PIPE_QUERY_GPU_FINISHED, but (a) queries are a per-context object
and we really want a per-screen object, (b) queries don't offer a
wait with timeout, and (c) in any case, PIPE_QUERY_GPU_FINISHED is
meant to imply that GPU caches are flushed, which the new bits
explicitly aren't.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some hw (evergreen) has a limit on how many combined (images/buffers/mrts)
a fragment shader can access.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Because vc4 can control the order that tiles are rasterized in, we can use
it to implement overlapping blits using normal drawing and
GL_ARB_texture_barrier, as long as we can tell the kernel what order to
render the tiles in.
This commit introduces the core gallium support, vc4 changes will follow.
v2: Fix on the simulator.
v3: Add the cap (disabled) to other drivers, add rst docs for the cap.
v4: Rebase on PIPE_CAP_TGSI_ANY_REG_AS_ADDRESS
v5: Drop vc4 changes from this commit, for clarity.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v3)
The operation performed is all the same as LODQ, but with the usual
differences between dx10 and GL texture opcodes, that is separate resource
and sampler indices (plus result swizzling, and setting z/w channels
to zero).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The status quo is quite the mess:
1. tgsi_exec will do a per-channel computation, and store the dst[0]
result (significand) correctly for each channel. The dst[1] result
(exponent) will be written to the first bit set in the writemask.
So per-component calculation only works partially.
2. r600 will only do a single computation. It will replicate the
exponent but not the significand.
3. The docs pretend that there's per-component calculation, but even
get dst[0] and dst[1] confused.
4. Luckily, st_glsl_to_tgsi only ever emits single-component instructions,
and kind-of assumes that everything is replicated, generating this for
the dvec4 case:
DFRACEXP TEMP[0].xy, TEMP[1].x, CONST[0][0].xyxy
DFRACEXP TEMP[0].zw, TEMP[1].y, CONST[0][0].zwzw
DFRACEXP TEMP[2].xy, TEMP[1].z, CONST[0][1].xyxy
DFRACEXP TEMP[2].zw, TEMP[1].w, CONST[0][1].zwzw
Settle on the simplest behavior, which is single-component calculation
with replication, document it, and adjust tgsi_exec and r600.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Sourcing the exponent for the zw destination pair from Z is consistent
with both tgsi_exec and gallivm. In practice, st_glsl_to_tgsi always
generates per-channel instructions anyway.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
It adds reference links for arguments usage and bind of resource_create().
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Previous get_paramf links same as get_param. It changes the reference link to
PIPE_CAPF_*
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
