We always get per-sample input position.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
because not using SPI_SHADER_32_ABGR doubles fill rate.
We should also get optimal performance if alpha isn't needed or blending
isn't enabled.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This does change the behavior slightly:
If a shader writes COLOR[i] and that color buffer isn't bound,
the shader will export MRT_NULL instead and discard the IR tree that
calculates the output. The only exception is alpha-to-coverage, which
requires an alpha export.
v2: - update a comment about 16BPC
- account for MRTZ when when fixing alpha-test/kill
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Normally there's a producer and consumer, and the producer var gets
picked. In both the vertex->gs and tes->gs cases, that's the un-arrayed
version.
In the SSO case, however, there is no producer. So we picked the arrayed
GS variable, and as a result, used more slots than we should. More
critically, these slots would also no longer line up with the producer's
calculation. To fix this, we need to fix up the type of the variable
based on stage no matter what.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93650
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Otherwise the user has no way of using it, and we'll try to access the
linear one.
v2:
- Bail out when KHR_gl_colorspace is missing and srgb is set (Marek)
Cc: Chih-Wei Huang <cwhuang@android-x86.org>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Fixes: c2c2e9ab604(egl: implement EGL_KHR_gl_colorspace (v2))
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91596
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
By using whole static libraries the android buildsystem provides
whole-archive (alike) solution. This means that we don't need to worry
about the order of the static libraries and any reverse, recursive or
circular dependencies that they have between one another.
Without this the linker will discard any unused hunks of one library
and we'll end up with unresolved symbols as those are required by
another static library. This issue has become more prominent with the
introduction of pipe-loader.
Whole static libraries has been used in i915/i965 for a very long
time, so we might do the same.
v2:
- Better commit message (Ilia)
- Keep external dependencies as [normal] static libs (Mauro)
Cc: mesa-stable@lists.freedesktop.org
Cc: Mauro Rossi <issor.oruam@gmail.com>
Reported-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
With an earlier commit we've spit the flags parsing to a separate
function, but forgot to update all the dri modules to use it.
Noticed when we've enabled KHR_debug for every dri module - fdo#93048
Fixes: 38366c0c6e "dri_util: Don't assume __DRIcontext->driverPrivate
is a gl_context"
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
The commit b4e198f47f changed the offset and bits parameters of the
bitfield insert operation from scalars to vectors. However, the lowering
of ldexp on doubles operates on each vector component and emits scalar
code (since it has to deal with the lower and upper 32-bit chunks of
each double component), so it needs its bits and offset parameters to
be scalars.
Fixes fp64 regression (crash) in:
spec/arb_gpu_shader_fp64/execution/built-in-functions/fs-ldexp-dvec4.shader_test
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Relocations are 64 bits on Gen8+. Most CTS tests that send
non-trivial work to the GPU would fail when run from a single deqp-vk
invocation because they were effectively relying on reloc presumed
offsets to be wrong so the kernel would come and apply relocations
correctly.
Before we were asuming that a deref would either be something in a block or
something that we could pass off to NIR directly. However, it is possible
that someone would choose to load/store/copy a split structure all in one
go. We need to be able to handle that.
Previously, we were creating nir_deref's immediately. Now, instead, we
have an intermediate vtn_access_chain structure. While a little more
awkward initially, this will allow us to more easily do structure splitting
on-the-fly.
Since the GREMEDY extensions are normally only exposed by the gremedy
debugger (and could possibly trigger debug paths in the app), we don't
expose the extension by default, but instead only with
ST_DEBUG=gremedy.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The extension spec[1] describes DEBUG_TYPE_MARKER as "Annotation of the
command stream". So for DEBUG_TYPE_MARKER, also pass the buf to the
driver's EmitStringMarker() to be inserted in the command stream.
[1] https://www.opengl.org/registry/specs/KHR/debug.txt
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
If we're continuing a render pass, make sure we don't emit the depth and
stencil buffer addresses before we set the state base addresses.
Fixes crucible func.cmd-buffer.small-secondaries
The texture mipmap completeness checking code was checking whether all
of the faces have the same size. However this is pointless because the
code just above it checks whether the face has the expected size
calculated for the mipmap level anyway so the error condition could
never be reached. This patch just removes it.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
According to the GL 1.4 spec section 3.8.10, a cubemap texture is only
complete if:
• The level base arrays of each of the six texture images making up
the cube map have identical, positive, and square dimensions.
• The level base arrays were each specified with the same internal
format.
• The level base arrays each have the same border width.
Previously the texture completeness code was only checking the first
point. This patch makes it additionally check the other two.
This fixes the following two dEQP tests:
deqp-gles2.functional.texture.completeness.cube.format_mismatch_rgba_rgb_level_0_neg_z
deqp-gles2.functional.texture.completeness.cube.format_mismatch_rgb_rgba_level_0_pos_z
And also this Piglit test:
spec/!opengl 2.0/incomplete-cubemap-format
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93792
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The buffers are referenced from r600_update_driver_const_buffers()
-> r600_set_constant_buffer() -> u_upload_data(), but nothing
ever releases the reference. Similar case with driver_consts.
Found using valgrind.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This currently sets the base and size of all push constants to the
entire push constant block. The idea is that we'll use the base and size
to eventually optimize the amount we actually push, but for now we don't
do that.
main/shaderapi.c:1318:51: warning: format specifies type 'unsigned int' but the argument has type 'GLhandleARB' (aka 'unsigned long') [-Wformat]
_mesa_debug(ctx, "glDeleteObjectARB(%u)\n", obj);
~~ ^~~
%lu
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
