This is not a valid optimization.
Fixes: fb29cef8dd ("nir: add many passes that lower and optimize 16-bit input/outputs and samplers")
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14895>
As this function doesn't check for any control-flow
dependence, it only returns true for statically
(or globally) uniform values.
The same holds true for is_binding_dynamically_uniform()
in nir_opt_gcm().
Rename to better reflect that property.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14994>
load_smem_gcn is similar to load_global/load_global_constant, but it's
guaranteed to use SMEM and it's much easier to utilize the format's 32-bit
offset source.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12773>
After running divergence analysis, we include "div" or "con" for each
SSA def's divergence/convergence status:
vec1 32 div ssa_35 = fddy ssa_34
vec1 32 con ssa_36 = fddy ssa_6.x
We omit this before the first time divergence analysis has been run.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15445>
Flat varying can save some rasterization compute cost
and register needed by shader.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15341>
This fixes performance regression for Specviewperf/Energy
on AMD GPU. Other GPUs passing varying by memory may choose
to re-enable it as need.
Fixes: 2604625043 ("nir/linker: support uniform when optimizing varying")
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15341>
The way they're handled is that deref->modes is treated as a bitfield of
possible modes. Variables are required to have a specific mode and
derefs with deref_type_var are as well.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13171>
the specification stipulates that this is a bool value, so don't load it as an int
or else nir_validate explodes
Fixes: f17b41ab4f ("nir: add lowering pass for helperInvocationEXT()")
Reviewed-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15402>
These will be used to implement the ir3-specific shader preamble
lowering in NIR. shps is conceptually similar to getone (although it
technically can't be duplicated) and shpe is similar to other barriers,
since it has to happen after any stores to the constant file in the
preamble. Add NIR intrinsics and plumbs them through ir3.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
This pass tries to move computations that are uniform for the entire
draw to the preamble. There's also an API for backends to insert their
own instructions into the preamble, for porting existing UBO pushing
passes.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
These are functions that run before the entrypoint at least once per
draw and write their results via store_preamble, and then are loaded in
the rest of the shader via load_preamble.
We will add users in the following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
On V3D reading UBOs from uniform addresses uses a more efficient
mechanism with lower latency. On other platforms there may be
simular scenarios.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
This has been pending for a long time. It is not very consistent to
add a significant delay for textures and not do it for UBOs, etc
The reason we have not been doing this so far is the accumulated effect
on register pressure for V3D as shown by shader-db results below, but
from the point of view of a generic scheduler it makes sense to do this.
Later patches will address V3D specific issues with register pressure
derived from this by letting the driver control its instruction delay
settings.
total instructions in shared programs: 12662138 -> 13126587 (3.67%)
instructions in affected programs: 1813091 -> 2277540 (25.62%)
helped: 2410
HURT: 10499
total threads in shared programs: 415858 -> 407208 (-2.08%)
threads in affected programs: 17348 -> 8698 (-49.86%)
helped: 8
HURT: 4333
total uniforms in shared programs: 3711483 -> 3812698 (2.73%)
uniforms in affected programs: 128012 -> 229227 (79.07%)
helped: 3474
HURT: 2143
total max-temps in shared programs: 2138763 -> 2318430 (8.40%)
max-temps in affected programs: 318780 -> 498447 (56.36%)
helped: 588
HURT: 11997
total spills in shared programs: 3860 -> 49086 (1171.66%)
spills in affected programs: 709 -> 45935 (6378.84%)
helped: 23
HURT: 1595
total fills in shared programs: 5573 -> 55810 (901.44%)
fills in affected programs: 1067 -> 51304 (4708.25%)
helped: 23
HURT: 1595
LOST: 3
GAINED: 0
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
We can get a generic nir_intrinsic_memory_barrier to represent a
barrier involving multiple semantics (instead of getting individual
specific barriers for each semantic). This means that we need to
consider these as potentially affecting shared memory access as well.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15276>
The workgroup_index is intended for situations when a 3 dimensional
workgroup_id is not available on the HW, but a 1 dimensional index is.
In this case, we can use lower the 3D ID to use this.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15103>
This is to match other NIR terminology.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15103>
PRIMITIVE_INDICES is a flat array in NV_mesh_shader,
not a proper arrayed output, as opposed to D3D-style
mesh shaders where it's addressed by the primitive index.
Prevent assigning several slots to primitive indices,
to avoid issues.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15160>
Like txf_ms, these take integers not floats.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15242>
These instructions have AMD hardware equivalent and they will be used
to lower fragment shader outputs in NIR.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15231>
vecN instructions which are only used by other ALU
will now get duplicate channels removed.
i915g:
total instructions in shared programs: 396309 -> 396294 (<.01%)
instructions in affected programs: 186 -> 171 (-8.06%)
r300:
total instructions in shared programs: 1165059 -> 1164354 (-0.06%)
instructions in affected programs: 35884 -> 35179 (-1.96%)
total temps in shared programs: 165497 -> 165326 (-0.10%)
temps in affected programs: 2990 -> 2819 (-5.72%)
softpipe:
total instructions in shared programs: 2860028 -> 2859084 (-0.03%)
instructions in affected programs: 55539 -> 54595 (-1.70%)
total temps in shared programs: 516939 -> 516546 (-0.08%)
temps in affected programs: 6623 -> 6230 (-5.93%)
Acked-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12468>
I noticed the SGE case while looking at the output of
shaders/closed/steam/trine-2/fp-3.shader_test on i915g. These are
especially bad on i915 that needs two instructions to implement SNE.
An alternative would be to duplicate the sne(sXX(a, b), 0.0) rules in an
algebraic pass that occurs after bool_to_float. Doing the work earlier
seems preferable.
i915
total instructions in shared programs: 788274 -> 788223 (<.01%)
instructions in affected programs: 666 -> 615 (-7.66%)
helped: 5
HURT: 0
helped stats (abs) min: 9 max: 12 x̄: 10.20 x̃: 9
helped stats (rel) min: 5.00% max: 11.11% x̄: 8.12% x̃: 8.16%
95% mean confidence interval for instructions value: -12.24 -8.16
95% mean confidence interval for instructions %-change: -10.81% -5.43%
Instructions are helped.
LOST: 0
GAINED: 2
The two gained shaders are assembly fragment programs in Euro Truck
Simulator 2.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15210>
This should reduce follow-on optimization work to copy-propagate and
dead-code away the movs generated in construction of vectors.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14865>
Trivial, but will help users avoid some struct constructions that can be
awkward in C.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14865>
Many users of nir_vec() do so by nir_channel()-ing a new ssa defs as movs
from other vectors to put the new vector together, which then just have to
get copy-propagated into the ALU srcs and DCEed away the temporary movs.
If they instead take nir_ssa_scalar, we can avoid that extra work.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14865>
moved from radeonsi without the vectorization, which won't be needed for
now. We will lower IO in st/mesa instead of radeonsi to get the transform
feedback info into store instructions.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This is for drivers that have separate store instructions for varyings,
system value outputs (such as clip distances), and transform feedback.
The flags tell the driver not to store the output to those locations.
This will be used by radeonsi initially, and then maybe by a new linker.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This will allow compaction of transform feedback varyings because they
are no longer tied to varying slots with this information.
It will also make transform feedback info available to all NIR passes
after IO is lowered. It's meant to replace pipe_stream_output_info.
Other intrinsics are not used with transform feedback.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
for this pass to work with xfb, the original value in the shader must be
preserved when xfb is active, and the driver must export only the newly
created output
Acked-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15184>
