The load uniform/temporary operations output only to a pipeline
register, which must be consumed by another op in the same instruction
later.
The current implementation delays the decision of who will consume this
result to until the scheduling step. If the consumer node is not able to
use the pipeline register, a mov node may have to be created, during the
scheduler step.
As part of the ppir scheduler simplification, and now that the ppir
scheduler supports pipeline register dependencies, this can be
simplified by always creating a single mov node outputting to a normal
register that can be used directly by all consumers.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
The select operation relies on the select condition coming from the
result of the the alu scalar mult slot, in the same instruction.
The current implementation creates a mov node to be the predecessor of
select, and then relies on an exception during scheduling to ensure that
both ops are inserted in the same instruction.
Now that the ppir scheduler supports pipeline register dependencies,
this can be simplified by making the mov explicitly output to the fmul
pipeline register, and the scheduler can place it without an exception.
Since the select condition can only be placed in the scalar mult slot,
differently than a regular mov, define a separate op for it.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
The ppir scheduler grew to be rather complicated and containing many
exceptions as it also has to take care of inserting additional nodes
when it is mandatory for nodes to be in the same instruction.
As such, the lima lowering and scheduling process can be difficult to
understand and maintain.
The ppir lowering step created nodes hoping that the scheduler would
notice the exception and do the right thing.
This proposal adds a simple refactor to the scheduler so that it places
nodes with pipeline registers in the same instruction.
With the scheduler handling this in a general way, it is possible to
create same-instruction dependencies by using pipeline registers during
the lowering stage.
This is simpler to maintain because now we can make these dependencies
explicit in a single place (lowering), and we can drop exceptions from
scheduling.
Reducing the complexity of the scheduler is also useful as preparatory
work to support control flow in ppir.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Right now, all it does is provide the new standard `static_assert()` name.
Fixes: fbf7c38da3 ("egl/wayland: use bitset.h for `formats` bit set")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Tested-by: Bhushan Shah <bshah@kde.org>
Utgard PP is vec4, but some operations are scalar, utilize
NIR vec to scalar lowering pass and indicate operations that we
want to lower.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
The brw_wm_prog_data_dispatch_grf_start_reg and _prog_offset helpers
read the _NPixelDispatchEnable fields from 3DSTATE_PS to figure out
which bits to pull out of the prog data and stuff where. Therefore,
they need to be called with the final set of _NPixelDispatchEnable bits
after we've done the workaround for SIMD32 and 16x MSAA. Otherwise, if
you end up with a somewhat odd combination of enables, the GRF start reg
and KSP data ends up in the wrong slots. In particular, running
SIMD32-only is broken but several other combinations are as well.
Fixes: 5445c176e2 "iris: Disable SIMD32 when using a 16x MSAA..."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
NetBSD expects a `void *` argument [1] as the printf-style arguments to
the formatting string, so we need to cast the `const` away.
[1] https://netbsd.gw.com/cgi-bin/man-cgi?pthread_setname_np++NetBSD-current
Suggested-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Unused as of last commit.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Tested-by: Vinson Lee <vlee@freedesktop.org>
This automates the include_directories and dependencies tracking so that
all users of libmesa_util don't need to add them manually.
Next commit will remove the ones that were only added for that reason.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Tested-by: Vinson Lee <vlee@freedesktop.org>
No functional changes, just breaks out a megamonster function and fixes
the indentation.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We need three independent sources to support indirect SSBO writes (as
well as textures with both LOD/bias and offsets). Now is a good time to
make sources just an array so we don't have to rewrite a ton of code if
we ever needed a fourth source for some reason.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
As far as I know, there's no such thing as a load/store op that only
takes its argument in r27. We just need to set the appropriate arg_1
field in the RA to specify other registers if we want them.
To facilitate this, various RA-related changes are needed across the
compiler ; this should also fix indirect offsets which were implicitly
interpreted as "r27-only" despite not even passing through RA yet. One
ripple effect change is switching the move insertion point and adjusting
the liveness analysis accordingly, so while this was intended as a
purely functional change, there are some shader-db changes:
total instructions in shared programs: 3511 -> 3498 (-0.37%)
instructions in affected programs: 563 -> 550 (-2.31%)
helped: 12
HURT: 0
helped stats (abs) min: 1 max: 2 x̄: 1.08 x̃: 1
helped stats (rel) min: 0.93% max: 5.00% x̄: 2.58% x̃: 2.33%
95% mean confidence interval for instructions value: -1.27 -0.90
95% mean confidence interval for instructions %-change: -3.23% -1.93%
Instructions are helped.
total bundles in shared programs: 2067 -> 2067 (0.00%)
bundles in affected programs: 398 -> 398 (0.00%)
helped: 7
HURT: 4
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 1.54% max: 10.00% x̄: 5.04% x̃: 5.56%
HURT stats (abs) min: 1 max: 2 x̄: 1.75 x̃: 2
HURT stats (rel) min: 2.13% max: 4.26% x̄: 3.72% x̃: 4.26%
95% mean confidence interval for bundles value: -0.95 0.95
95% mean confidence interval for bundles %-change: -5.21% 1.50%
Inconclusive result (value mean confidence interval includes 0).
total quadwords in shared programs: 3464 -> 3454 (-0.29%)
quadwords in affected programs: 1199 -> 1189 (-0.83%)
helped: 18
HURT: 4
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 1.03% max: 5.26% x̄: 2.44% x̃: 1.79%
HURT stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
HURT stats (rel) min: 2.56% max: 2.82% x̄: 2.63% x̃: 2.56%
95% mean confidence interval for quadwords value: -0.98 0.07
Inconclusive result (value mean confidence interval includes 0).
total registers in shared programs: 383 -> 373 (-2.61%)
registers in affected programs: 56 -> 46 (-17.86%)
helped: 12
HURT: 2
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 9.09% max: 33.33% x̄: 29.58% x̃: 33.33%
HURT stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel) min: 20.00% max: 50.00% x̄: 35.00% x̃: 35.00%
95% mean confidence interval for registers value: -1.13 -0.29
95% mean confidence interval for registers %-change: -35.07% -5.63%
Registers are helped.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Load/store's main "argument 0" already has its swizzle handled
correctly (for stores, that is). But the tinier arguments, the compact
ones with a component select but not a full swizzle, those are not yet
handled. Let's do something about that!
Rather than an ersatz thing that sort of looks like successors but is in
fact just the source order traversal with some backward jumps hacked in
for loops... construct an actual flow graph so we can do analysis
sanely.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The 16-bit field can be decomposed to two independent 8-bit fields, each
representing a single (additional) argument to the load/store op,
generally used for encoding registers. Addressable registers here are
substantially limited compared to the main register in a load/store op.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Rather than alloacting a huge (64MB) polygon list on context creation
and sharing it across framebuffers, we instead allocate polygon lists as
BOs (which consistently hit the cache) sized appropriately; for about a
month, we've known how to calculate the polygon list size so this has
only recently become possible.
The good news is we can render to truly massive framebuffers without
crashing and, more importantly, we eliminate the 64MB upfront overhead.
If a list that size isn't actually needed, it's not allocated.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Allows us to pass BOs without checking if they're NULL or not.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The only user of this function always passes true.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The FB desc will be emitted/attached on the first draw targetting
this new FB.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The wallpaper blit is a bit special in that the operation is targetting
the current FB, but the u_blitter logic creates a new surface for it
which makes util_framebuffer_state_equal() return false. In that case
we don't want a new FB descriptor to be emitted/attached, so let's just
copy the new state into ctx->pipe_framebuffer and exit the function.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
If the current FB matches the new one there's nothing to be done in
panfrost_set_framebuffer_state(). By bailing out early in that case we
avoid emitting new FB descriptors (the old ones are still valid).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
No need to emit SFBD/MFBD at frame invalidation. They can be emitted
when the framebuffer is attached, which saves us a potential FB desc
re-allocation if a new FB is bound after the swap.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This guarantees that new draws targetting the same framebuffer will
get a new job instance.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
ctx->job is supposed to serve as a cache to avoid an hash table lookup
everytime we access the job attached to the currently bound FB, except
it was never assigned to anything but NULL.
Fix that by adding the missing assignment in panfrost_get_job_for_fbo().
Also add a missing NULL assignment in the ->set_framebuffer_state()
path.
While at it, add extra assert()s to make sure ctx->job is consistent.
Fixes: 59c9623d0a ("panfrost: Import job data structures from v3d")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
When the application does not ask for robust buffer access.
Only implemented the check in radv.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
These versions still need wrapper but already have both success and
failure ordering.
(Compile tested on llvm 3.3, 3.7, 3.8.)
v2: don't duplicate whole function (suggested by Brian).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111102
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
While at it, remove p_compiler.h as well as it is unused.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This allows us to avoid having to rename all the PIPE_OS_* at once while
still making sure PIPE_OS_* and DETECT_OS_* are always in sync.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
