Fixes:
xa_tracker.c: In function 'xa_tracker_create':
xa_tracker.c:147:5: error: implicit declaration of function 'pipe_loader_drm_probe_fd' [-Werror=implicit-function-declaration]
in some build configurations, as XA now implicitly depends on
gallium_drm_loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Fixes radeonsi emitting command streams to the kernel even when there
have been no draw calls before a flush, potentially powering up the GPU
needlessly.
Incidentally, this also cuts the runtime of piglit gpu.py in about half
on my Kaveri system, probably because an X11 client going away no longer
always results in a command stream being submitted to the kernel via
glamor.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=65761
Cc: "10.1" mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Required for libdrm 2.4.37 and earlier. Both scons and automake
require version 2.4.38 now so that guard is not longer needed.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
No longer set or used since the removal of st/xorg.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
xorg-server and libkms is no longer required since the removal
of the xorg state-tracker.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is the first version that introduced DRM_CAP_PRIME, which is
implicitly required by egl/wayland.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
* Make sure that only drivers that are handled by configure.ac
are included in DRI_DIRS.
* Change with_dri_drivers default value to auto, and set enable
autodetection, when enable_opengl is on.
v2: Move "test" to the correct location.
v3: Squash DRI_DIRS handling before the switch statement.
Suggested by Ilia Mirkin
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Both x86_64|amd64 and *bsd, already set the full range of available
classic dri drivers. Drop the explicit assignment, and fall back to
the generic default.
Keep explicit list from plafroms/arches that do not handle the default
list.
Update help strings, to explicitly mention "classic" for applicable
DRI drivers.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Move all the cases within one switch statement and handle
i9{1,6}5 and r{adeon,200} independently.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
If built without llvm, the following error occurs with mplayer:
Failed to open VDPAU backend .../libvdpau_r600.so: undefined symbol: _ZTVN10__cxxabiv117__class_type_infoE
[vo/vdpau] Error when calling vdp_device_create_x11: 1
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
DRM_API_HANDLE_TYPE_SHARED is zero, so doesn't actually fix anything.
But we shouldn't rely on SHARED handle type being zero.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Build two versions of pipe-loader, with only the client version linking
in x11 client side dependencies. This will allow the XA state tracker
to use pipe-loader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Seems texture sample instructions don't immediately consume there
src(s). In fact, some shaders from blob compiler seem to indiciate that
it does not even count the texture sample instructions when calculating
number of delay slots to fill for non-sample instructions. (Although so
far it seems inconclusive as to whether this is required.)
In particular, when a src register of a previous texture sample
instruction is clobbered, the (ss) bit is needed to synchronize with the
tex pipeline to ensure it has picked up the previous values before they
are overwritten.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Was supposed to be a '+', otherwise we end up with a negative offset and
choosing registers below the assigned range.
This seems to fix the scheduling mystery "solved" by adding in extra
delay slots.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Since 'kill' does not produce a result, the new compiler was happily
optimizing them out. We need to instead track 'kill's similar to
outputs. But since there is no non-predicated kill instruction,
(and for flattend if/else we do want them to be predicated), we need
to track the topmost branch condition on the stack and use that as src
arg to the kill. For a kill at the topmost level, we have to generate
an immediate 1.0 to feed into the cmps.f for setting the predicate
register.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Thanks to figuring out 32bit float render target, and adding regdump
test in fdre-a3xx, I can more easily play around with instructions to
figure out range of inputs/outputs/etc. And from this I can conclude
that cmps.f works more like expected and I can do something much more
simple in trans_cmp() (compared to before which was more closely
emulating the instruction sequence of the blob compiler).
And using sel.b32 (binary 0/1) often makes more sense than sel.f32
(+/- float) or sel.u32 (+/- uint) as it can use the output directly
from cmps.f without needing the 'add.s tmp0, tmp0, -1'.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
As documented, the _mesa_free_shader_program_data function:
"Frees all the data that hangs off a shader program object, but not
the object itself."
This means that this function may be called multiple times on the same object,
(and has been observed to). Meanwhile, the shProg->Label field was not being
set to NULL after its free(). This led to a second call to free() of the same
address on the second call to this function.
Fix this by setting this field to NULL after free(), (just as with all other
calls to free() in this function).
Reviewed-by: Brian Paul <brianp@vmware.com>
CC: mesa-stable@lists.freedesktop.org
The linux winsys needs to know whether a surface is shared.
For guest-backed surfaces we need this information to avoid allocating a
mob out of the mob cache for shared surfaces, but instead allocate a shared
mob, that is never put in the mob cache, from the kernel.
Also previously, all surfaces were given the "shareable" attribute when
allocated from the kernel. This is too permissive for client-local surfaces.
Now that we have the needed info, only set the "shareable" attribute if the
client indicates that it needs to share the surface.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This is a squash commit of many commits by Thomas Hellstrom.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
In some situations, it may be desirable to bypass the cache at buffer
creation but to insert the buffer in the cache at buffer destruction.
One such situation is where we already have a kernel representation of a
buffer that we want to use, but we also want to insert it in the cache when
it's freed up.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
In some situations it's important to restrict the sizes of buffers that the
cached buffer manager is allowed to return
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
This adds new interface functions for guest-backed surfaces and
adds a mobid parameter to the surface_relocation() function.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
The old svga3d_reg.h file is split into separate header files and we
add new items for guest-backed surfaces.
Plus some minor code fixes because of renamed symbols.
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
