This is the closing for the "\defgroup IR Intermediate representation
nodes" all the way at the top of the file.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When doing software rendering (i.e. rendering to the selection buffer) we need
to make sure that we have valid index bounds before calling _tnl_draw_prims(),
otherwise we can crash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59455
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The underlying glDrawArrays() calls weren't getting compiled into
the display list. We simply need to use the current dispatch table
so the CALL_DrawArrays() is routed to the display list save function.
This patch also fixes glMultiModeDrawArraysIBM and
glMultiModeDrawElementsIBM.
Fixes the new piglit gl-1.4-dlist-multidrawarrays test.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously we only examined the GL_DEPTH_MODE state to determine the
sampler view swizzle for depth textures. Now we also consider the
texture base format for color textures too.
The basic idea is if we're sampling from a RGB texture we always
want to get A=1, even if the actual hardware format might be RGBA.
We had assumed that the texture's A values were always one since that's
what Mesa's texstore code does. But if we render to the RGBA texture,
the A values might not be 1. Subsequent sampling didn't return the
right values.
Now we examine the user-specified texture base format vs. the actual
gallium format to determine the right swizzle.
Fixes several fbo-blending-formats, fbo-clear-formats and fbo-tex-rgbx
failures with VMware/svga driver (and possibly other drivers).
No other piglit regressions with softpipe or VMware/svga.
Reviewed-by: Marek Olšák <maraeo@gmail.com>
In preparation for following changes.
I used a temporary test harness to compare the old code to the new
for all possible swizzle inputs. No change in results.
This also happens to fix a leak of the current GS pull constant BO on
context destroy, by just not holding on to the pull const bos after the
surface state is generated.
No statistically significant performance difference on GLB2.7 on HSW at
1024x768 (n=40) or 320x240 (n=44), or on BYT at 320x240 (n=47).
v2: Rebase on intel_upload simplification.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The implementation kept a page-sized area for uploading data, and
uploaded chunks from that to a 64kb-sized streamed buffer. This wasted
cache footprint (and extra state tracking to do so) when we want to just
write our data into the buffer immediately.
Instead, build it around an interface like brw_state_batch() that just
gets you a pointer to BO memory to upload your stuff immediately.
Improves OpenArena on HSW by 1.62209% +/- 0.355299% (n=61) and on BYT by
1.7916% +/- 0.415743% (n=31).
v2: Rebase on Mesa master, drop old prototypes. Re-do performance
comparison on a kernel that doesn't punish CPU efficiency
improvements.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
it's useful to know what the llvmbuildstore arguments are going to
be before executing it because it can crash and make sure to
print out the inputs only if we're not generating a gs because
it fetches inputs differently.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
We used to overallocate the output buffer sometimes running out
of memory with applications rendering large geometries. The actual
maximum number of vertices out is simply the maximum number of
primitives in (number of gs invocations) multiplied by the maximum
number of output vertices per gs input primitive (i.e. gs invocation).
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Don't pass null query object pointers into gallium functions.
This avoids segfaulting in the VMware driver (and others?) if the
pipe_context::create_query() call fails and returns NULL.
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
And use the z32f_x24s8 helper struct in unpack_Z32_FLOAT_X24S8().
Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
sed commands:
s/ARGB2101010_UINT\b/B10G10R10A2_UINT/g
s/ABGR2101010_UINT\b/R10G10B10A2_UINT/g
Reviewed-by: Reviewed-by: Roland Scheidegger <sroland@vmware.com>
It is quite hard to meet the dependency of the libxml2 python bindings
outside Linux, and in particularly on MacOSX; whereas ElementTree is
part of Python's standard library. ElementTree is more limited than
libxml2: no DTD verification, defaults from DTD, or XInclude support,
but none of these limitations is serious enough to justify using
libxml2.
In fact, it was easier to refactor the code to use ElementTree than to
try to get libxml2 python bindings.
In the process, gl_item_factory class was refactored so that there is
one method for each kind of object to be created, as it simplifies
things substantially.
I confirmed that precisely the same output is generated for GL/GLX/GLES.
v2: Remove m4/ax_python_module.m4 as suggested by Matt Turner.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Release the references to the sampler views before
destroying the pipe context.
v2: remove TODO and unrelated change
v3: move to st_texture.[ch], rename callback, add comment
v4: fix rebase mess up and add further cleanups
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.0 10.1" <mesa-stable@lists.freedesktop.org>
This can get called in some circumstances if both src type and dst type
have same width (seen with float32->unorm32). While this particular case
was bogus anyway let's just fix that as it can work trivially (due to the
way it was called it actually worked anyway apart from the assert).
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When deciding if a clear color is suitable for fast clear,
take into account if a color channel is active in the
buffer format.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This patch introduces two pre-canned MOCS values: BDW_MOCS_WB
(write-back, all caches) and BDW_MOCS_WT (write-through, all caches).
We use write-through caching for render targets, and write-back for
all other data. (At least on Haswell, I believe write-back LLC/eLLC
didn't work for scan-out buffers, while write-through did.)
No performance analysis has been done on the impact of this patch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
Core profile requires a non-default VAO to be bound. Currently, calls
to glVertexAttribPointer raise INVALID_OPERATION unless a VAO is bound,
and we never actually get any vertex data set. Trying to draw without
any vertex data can only cause problems. In i965, it causes a crash.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76400
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
These could probably be squashed into one of the previous commits.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
All of the functionality is implemented in a private function in the one
file where it is used.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fix eglCreateImage() from a packed dma_buf surface with a non-zero offset
to pixels data. In particular, this fixes support for planar YUV surfaces
when they are individually mapped on a per-plane basis, i.e. when the
OES_EGL_image_external is not used and user application wants to use its
own shader code for composition, or processing on individual plane (OCL).
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation note:
I don't use context for ralloc (don't know how).
The check on PROGRAM_SEPARABLE flags is also done when the pipeline
isn't bound. It doesn't make any sense in a DSA style API.
Maybe we could replace _mesa_validate_program by
_mesa_validate_program_pipeline. For example we could recreate a dummy
pipeline object. However the new function checks also the
TEXTURE_IMAGE_UNIT number not sure of the impact.
V2:
Fix memory leak with ralloc_strdup
Formatting improvement
V3 (idr):
* Actually fix the leak of the InfoLog. :)
* Directly generate logs in to gl_pipeline_object::InfoLog via
ralloc_asprintf isntead of using a temporary buffer.
* Split out from previous uber patch.
* Change spec references to include section numbers, etc.
* Fix a bug in checking that a different program isn't active in a stage
between two stages that have the same program. Specifically,
if (pipe->CurrentVertexProgram->Name == pipe->CurrentGeometryProgram->Name &&
pipe->CurrentGeometryProgram->Name != pipe->CurrentVertexProgram->Name)
should have been
if (pipe->CurrentVertexProgram->Name == pipe->CurrentFragmentProgram->Name &&
pipe->CurrentGeometryProgram->Name != pipe->CurrentVertexProgram->Name)
v4 (idr): Rework to use CurrentProgram array in loops.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is much like _mesa_sampler_uniforms_are_valid, but it operates
across an entire pipeline object.
This function differs from _mesa_sampler_uniforms_are_valid in that it
directly creates the gl_pipeline_object::InfoLog instead of writing to
some temporary buffer.
This was originally included in another patch, but it was split out by
Ian Romanick.
v2 (idr): Fix the loop bounds. shProg isn't an array, so
ARRAY_SIZE(shProg) was 1, so only the vertex program was validated.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
V2 (idr):
* Keep the behavior of other info logs in Mesa: and empty info log
reports a GL_INFO_LOG_LENGTH of zero.
* Use a NULL pointer to denote an empty info log.
* Split out from previous uber patch.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
