It was found that dual-source blending hangs with SIMD16 dispatch in some
specific but unknown situation. Which in the wild happen when rgba
anti-aliasing is enabled for fonts.
Cc: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2183
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5037>
After 2663759af0 ("intel/fs: Add and use a new load_simd_width_intel
intrinsic") the local_workgroup_size is not used anymore except for
assertions at the pass' start, so drop it from state struct.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5213>
The nir_intrinsic_load_simd_width_intel is always lowered by the
brw_nir_lower_simd() pass before the emission happens. This is likely
a "leftover" from patch rewriting/squashing that happened when this
intrinsic was added.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5213>
When running in a virtual context, the timestamp register is unreadable
on Gen12+.
While we could work around this, that would result in very inaccurate
results for an extension where the whole point is accuracy, so let's
just disable the extension.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2797>
This allows its use without the need for an anv_device.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2797>
Issue description from Matt's commit e7c376ad:
"var_range_end(v, n) loops over the n components of variable number v and
finds the maximum value, giving the last use of any component of v.
Therefore it expects v to correspond to the variable associated with the
.x channel of the VGRF.
var_from_reg() however returns the variable for the first channel of the
VGRF, post-swizzle.
So, if the last register had a swizzle with y, z, or w in the swizzle
component, we would read out of bounds. For any other register, we would
read liveness information from the next register.
The fix is to convert the src_reg to a dst_reg in order to call the
dst_reg version of var_from_reg() that doesn't consider the swizzle."
Closes: #3003
Fixes: 48dfb30f ('intel/compiler: Move all live interval analysis results into vec4_live_variables')
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrii Simiklit <asimiklit.work@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4941>
An unknown issue is causing vs push constants to become corrupted
during object-level preemption. For now, restrict to command
buffer level preemption to avoid rendering corruption.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5110>
A buffer added to all execbufs so that we can attribute a batch that
caused a hang to a particular driver.
v2: Reuse workaround BO
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3203>
We initially used this debug option to mean "don't bother registering
the OA configuration into the kernel".
This change makes this option suppress any interaction with the
i915/perf interface. This is useful when debugging self modifying
batches with performance queries while running on the intel_mi_runner.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
This has the same kernel requirements are VK_INTEL_performance_query
v2: Fix empty queue submit (Lionel)
v3: Fix autotool build issue (Piotr Byszewski)
v4: Fix Reset & Begin/End in same command buffer, using soft-pin &
relocation on the same buffer won't work currently. This version
uses a somewhat dirty trick in anv_execbuf_add_bo (Piotr Byszewski)
v5: Fix enumeration with null pointers for either pCounters or
pCounterDescriptions (Piotr)
Fix return condition on enumeration (Lionel)
Set counter uuid using sha1 hashes (Lionel)
v6: Fix counters scope, should be COMMAND_KHR not COMMAND_BUFFER_KHR (Lionel)
v7: Rebase (Lionel)
v8: Rework checking for loaded queries (Lionel)
v9: Use new i915-perf interface
v10: Use anv_multialloc (Jason)
v11: Implement perf query passes using self modifying batches (Lionel)
Limit support to softpin/gen8
v12: Remove spurious changes (Jason)
v13: Drop relocs (Jason)
v14: Avoid overwritting .sType in
VkPerformanceCounterKHR/VkPerformanceCounterDescriptionKHR (Lionel)
v15: Don't copy the entire
VkPerformanceCounterKHR/VkPerformanceCounterDescriptionKHR (Jason)
Reuse anv_batch rather than custom packing (Jason)
v16: Fix missing MI_BB_END in reconfiguration batch
Only report the extension with kernel support (perf_version >= 3)
v17: Some cleanup of unused stuff
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
The current code relies on the order of the function
gen_perf_query_result_accumulate() to match the descriptions written
by gen_perf.py. Let's just reuse the offset specified in the python
script.
v2: Use accumlator offsets more (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
We're about to use the offset fields from the query object. We can't
just use a made up object.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
The produced array tells use what metric to enable for a given pass.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
We want to compute the number of passes required to gather performance
data about a set of counters.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
For a future extension we want to be able to list the counters. Our
existing sets counters might contain the same counters multiple times.
This is a side effect of the fixed OA counters in the HW. We track
thoses with a mask so that we know when a counter is available from
multiple metrics.
v2: Use BITFIELD64_BIT() (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
Previously counter descriptions as well register values were written
in global static variables. This isn't really thread safe so instead
ralloc all the data back under the gen_perf_config object.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
On Vulkan most of those are already covered by standard queries so
add the ability to skip them.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
This new bit invalidates the cache/prefetch of commands in the command
streamer. This will be useful for self modifying batches.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
This change adds a call/return execution mode for secondary command
buffer rather than the existing copy into the primary batch mode.
v2: Rework convention to avoid burning an ALU register (Jason)
v3: Use anv_address_add() (Jason)
v4: Move command emissions to anv_batch_chain.c (Jason)
v5: Also move last MI_BBS emission in secondary command buffer to
anv_batch_chain.c (Jason)
v6: Fix end secondary command buffer end (Jason)
v7: Refactor anv_batch_address() to remove additional emit functions
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
By using the same mi_builder throughout the draw call, we can just
allocate a register from the mi_builder and unref it when we're done.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
v2: Use Jason's idea to store addresses to modify
v3: Add ALU flushes (Jason)
v4: Remove ALU flush from gen_mi_self_mod_barrier() (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
This instruction has a group with the same name than another field above :
<field name="Data DWord" start="64" end="95" type="uint"/>
<group count="0" start="96" size="64">
<field name="Register Offset" start="2" end="22" type="offset"/>
<field name="Data DWord" start="32" end="63" type="uint"/>
</group>
The script was replacing the offset of the field first with the second
one in the group.
This change ignore anything a group within an instruction.
v2: Drop unused variable (Rafael)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2775>
It sure looks like it should be a Boolean value, but it's not. The
values that we really want for later platforms are either 2 or 3. The
old intel_stub.c in shader-db just always returns 3
(I915_GEM_PPGTT_FULL). This returns the same set of values per platform
that kernel 5.6.13 would.
When using the shim for ICL with i965 driver, this fixes:
i965 requires softpin (Kernel 4.5) on Gen10+.
Fixes: 0f4f1d70bf ("intel: add stub_gpu tool")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5061>
When using the shim for HSW and earlier, this fixes:
DRM_SHIM: unhandled driver DRM ioctl 33 (0xc0106461)
Fixes: 0f4f1d70bf ("intel: add stub_gpu tool")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5061>
If this gets run right after something which uses
VK_VERTEX_INPUT_RATE_INSTANCE on its first vertex binding, we could end
up in serious trouble.
Fixes: 3d9747780b "anv: Add a helper for doing buffer copies with..."
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5090>
We will later use the devinfo from iris_bufmgr, where we don't have
access to the screen pointer. And since we are moving it, we can reuse
it in Anv and i965.
v2: return error code and check for it on Anv (Lionel).
v3: Remove anv_gem_get_aperture() from anv_private.h and stubs (Lionel).
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5043>
...in every file that includes intel_log.h.
In file included from src/intel/vulkan/anv_private.h:93,
from src/intel/vulkan/genX_cmd_buffer.c:27:
src/intel/common/intel_log.h: In function ‘__intel_log_use_args’:
src/intel/common/intel_log.h:75:34: warning: unused parameter ‘format’ [-Wunused-parameter]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4994>
...in every file that includes anv_private.h.
In file included from src/intel/vulkan/genX_cmd_buffer.c:27:
src/intel/vulkan/anv_private.h: In function ‘anv_image_get_clear_color_addr’:
src/intel/vulkan/anv_private.h:3690:57: warning: unused parameter ‘device’ [-Wunused-parameter]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4994>
This was a bit of rebase fail when writing 682c81bdfb. We stopped
freeing descriptor sets back to the pool and started calling
vk_object_base_finish. This commit reverts a that hunk should have
never made its way into the final patch.
Fixes: 682c81bdfb "vulkan,anv: Add a base object struct type"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5032>
