This patch modifies the get_variable_being_redeclared() function so
that it no longer relies on the ast_declaration for the variable being
redeclared. In future patches, this will allow
get_variable_being_redeclared() to be used for processing
redeclarations of the built-in gl_PerVertex interface block.
v2: Also make get_variable_being_redeclared() static.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note: we need to make an exception for the gl_PerVertex interface
block, since in geometry shaders it is allowed to be redeclared with
the instance name gl_in. Future patches will make redeclaration of
gl_PerVertex work properly.
Fixes piglit test
spec/glsl-1.50/compiler/interface-block-instance-name-uses-gl-prefix.vert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note: we need to make an exception for the gl_PerVertex interface
block, since built-in variables are allowed to be redeclared inside
it. Future patches will make redeclaration of gl_PerVertex work
properly.
Fixes piglit tests:
- spec/glsl-1.50/compiler/interface-block-array-elem-uses-gl-prefix.vert
- spec/glsl-1.50/compiler/named-interface-block-elem-uses-gl-prefix.vert
- spec/glsl-1.50/compiler/unnamed-interface-block-elem-uses-gl-prefix.vert
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note: we need to make an exception for the gl_PerVertex interface
block, since this is allowed to be redeclared. Future patches will
make redeclaration of gl_PerVertex work properly.
Fixes piglit test
spec/glsl-1.50/compiler/interface-block-name-uses-gl-prefix.vert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Note: some limited amount of redeclaration is actually allowed,
provided the shader is redeclaring the built-in gl_PerVertex interface
block. Support for this will be added in future patches.
Fixes piglit tests
spec/glsl-1.50/compiler/unnamed-interface-block-elem-conflicts-with-prev-{block-elem,global}.vert.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL reserves identifiers beginning with "gl_" or containing "__", but
we haven't been consistent about enforcing this rule. This patch
makes a new function to check whether identifier names are valid. In
the process it closes a loophole where we would previously allow
function argument names to contain "__".
v2: Rename check_valid_identifier() -> validate_identifier(). Add
curly braces in validate_identifier().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch adds a "location" element to struct glsl_struct_field, so
that we can keep track of the gl_varying_slot associated with each
built-in geometry shader input.
In lower_named_interface_blocks, we use this value to populate the
"location" field in the ir_variable that stores each geometry shader
input.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Explicit attribute locations are supported with GLSL 3.30, GLSL ES 3.00,
or "#extension GL_ARB_explicit_attrib_location: enable". Using a helper
function makes it easy to check for this.
This enables support in GLSL 3.30, which was previously missing.
Previously, we overrode the extension enable flag for ES 3.00. This is
not robust against a shader such as:
#version 330
#extension GL_ARB_explicit_attrib_location : disable
Disabling extensions should not remove core language functionality.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
During compilation, we'll use this to determine built-in availability.
The plan is to have a single shader containing every built-in in every
version of the language, but filter out the ones that aren't actually
available to the shader being compiled.
At link time, we don't actually need this filtering capability: we've
already imported prototypes for every built-in that the shader actually
calls, and they're flagged as is_builtin(). The linker doesn't import
any additional prototypes, so it won't pull in any unavailable
built-ins. When resolving prototypes to function definitions, the
linker ensures the values of is_builtin() match, which means that a
shader can't trick the linker into importing the body of an unavailable
built-in by defining a suspiciously similar prototype.
In other words, during linking, we can just pass in NULL. It will work
out fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
GLSL 1.30 doesn't allow precision qualifiers on sampler types,
but in GLSL ES, sampler types are also allowed. This seems like
an oversight (since the intention of including these in GLSL 1.30
is to allow compatibility with ES shaders).
Currently, Mesa allows "default" precision qualifiers to be set for
sampler types in GLSL (commit d5948f2). This patch makes it follow
GLSL ES rules and also allow declaring sampler variables with a
precision qualifier in GLSL 1.30 (and later). e.g.
uniform lowp sampler2D sampler;
This fixes a shader compilation error in Khronos OpenGL conformance
test "depth_texture_mipmap".
V2: Update comments.
Signed-off-by: Ian Romanick <idr@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <idr@lists.freedesktop.org>
Cc: <mesa-stable@lists.freedesktop.org>
This same message is printed in the validate_matrix_layout_for_type
function.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The variable means that UBO qualifiers are allowed in a particular
context (e.g., not allowed in a struct field declaration), rather than a
particular set of UBO qualifiers are valid.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This is required by the spec, and it's a bit tricky because the default
precision is scoped. As a result, I'm slightly abusing the symbol
table.
Fixes piglit no-default-float-precision.frag tests and the piglit
default-precision-nested-scope-0[1234].frag tests that are currently on
the piglit mailing list for review.
On IRC I got confirmation from cwabbot that ARM (Mali T6xx and T400)
enforces this requirement and from kusma that NVIDIA (Tegra2) enforces
this requirement. We should be safe from regressing shipping
applications.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
This is used by the next patch.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Continue to allow them in GLSL 1.10 because the spec allows it.
Generate an error in all other versions because the specs specifically
disallow it.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Send it straight to the Department of Redundancy Department.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we would emit a warning for empty declarations like
float;
We would also emit the same warning for things like
highp float;
However, this second case is most likely the application trying to set
the default precision. This makes the compiler generate a stronger
warning with some suggestion of a fix.
It really seems like this should be an error. I'll bet that 100% of the
time someone writes 'highp float;' the actually meant 'precision highp
float;'. Alas, both AMD and NVIDIA accept this syntax, and the spec
doesn't explicitly forbid it.
This makes piglit's precision-05.vert generate the following warnings:
0:12(11): warning: empty declaration with precision qualifier, to set the default precision, use `precision lowp float;'
0:13(12): warning: empty declaration with precision qualifier, to set the default precision, use `precision mediump int;'
v2: Add { } around a one-line if body and fix a comment. Suggested by
Ken.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "9.2" <mesa-stable@lists.freedesktop.org>
Previously, we were accidentally calling
handle_geometry_shader_input_decl() on non-input interface block
declarations, resulting in bogus error checking.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, if a geometry shader input was declared as a non-array, we
would flag the proper compiler error, but then before we got a chance
to report it to the client, handle_geometry_shader_input_decl() would
assertion fail.
With this patch, handle_geometry_shader_input_decl() ignores
non-arrays.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
GLSL ES does not allow unsized arrays, and GLSL ES 1.00 does not allow
array initializers. However, GLSL ES 3.00 allows array initializers,
and the initializer can explicitly size the array. The specification
even includes some examples of this:
float x[] = float[2] (1.0, 2.0); // declares an array of size 2
float y[] = float[] (1.0, 2.0, 3.0); // declares an array of size 3
float a[5];
float b[] = a;
Move the unsized array check to after the initializer has been
processed. If the array is still unsized, generate the error. This
should have no effect in GLSL ES 1.00 because, as previously mentioned,
array initializers are not allowed.
Fixes piglit "glsl-es-3.00 compiler array-sized-by-initializer.vert".
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "9.1 9.2" <mesa-stable@lists.freedesktop.org>
GLSL 1.50 incorporates the functionality of the
ARB_fragment_coord_conventions extension, so we need to make this
functionality available even if the extension isn't enabled.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Commit 2548092ad8 switched the sense of interpolation qualifier
checks in order to permit them on geometry shader in/out variables.
In doing so, it accidentally allowed interpolation qualifiers to be
applied to ordinary variables and function parameters.
Fixes a regression in Piglit's local-smooth-01.frag.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Section 4.3.8.1 (Input Layout Qualifiers) of the GLSL 1.50 spec
contains some tricky rules for how the sizes of geometry shader input
arrays are related to the input layout specification. In essence,
those rules boil down to the following:
- If an input array declaration does not specify a size, and it
follows an input layout declaration, it is sized according to the
input layout.
- If an input layout declaration follows an input array declaration
that didn't specify a size, the input array declaration is given a
size at the time the input layout declaration appears.
- All input layout declarations and input array sizes must ultimately
match. Inconsistencies are reported as soon as they are detected,
at compile time if the inconsistency is within one compilation unit,
otherwise at link time.
- At least one compilation unit must contain an input layout
declaration.
(Note: the geom_array_resize_visitor class was contributed by Bryan
Cain <bryancain3@gmail.com>.)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Limited semantic checking (compatibility between declarations, checking
that they're in the right shader target, etc.) is done.
v2: Remove stray debug printfs.
v3 (Paul Berry <stereotype441@gmail.com>): Process input layout
qualifiers at ast_to_hir time rather than at parse time, since certain
error conditions depend on the relative ordering between input layout
qualifiers, declarations, and calls to .length().
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We do some tests of qualifiers using a union containing an int and the
struct full of bitfields, so make sure the bitfields don't spill
outside the int.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit adds all of the parsing and semantics for GLSL 150 style
geometry shaders.
v2 (Paul Berry <stereotype441@gmail.com>): Add a few missing calls to
get_pipeline_stage(). Fix some signed/unsigned comparison warnings.
Fix handling of NULL consumer in assign_varying_locations().
v3 (Bryan Cain <bryancain3@gmail.com>): fix indexing order of 2D
arrays. Also, allow interpolation qualifiers in geometry shaders.
v4 (Paul Berry <stereotype441@gmail.com>): Eliminate
get_pipeline_stage()--it is no longer needed thanks to 030ca23 (mesa:
renumber shader indices according to their placement in pipeline).
Remove 2D stuff. Move vertices_per_prim() to ir.h, so that it will be
accessible from outside the linker. Remove
inject_num_vertices_visitor. Rework for GLSL 1.50.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v5 (Paul Berry <stereotype441@gmail.com>): Split out
do_set_program_inouts() argument refactoring to a separate patch.
Move geom_array_resizing_visitor to later in the series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The majority of calls to _mesa_glsl_error(), _mesa_glsl_warning(), and
_mesa_glsl_parse_state::check_version() use a message that begins with
a lower case letter and ends without a period. This patch makes all
messages follow that convention.
Also, error/warning messages shouldn't end in '\n', since
_mesa_glsl_msg() automatically adds '\n' at the end of the message.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Without an instance name, there is no ir_variable representing the
actual uniform block declaration. When the linker goes to set uniform
initializers, it only sees the members as ir_variables; never the block.
So, unfortunately, the members need to know about the binding.
There has to be a better way to do this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Rather than creating a new "binding" field in ir_variable, we reuse
constant_value since the linker code for handling uniform initializers
uses that.
Since UBOs and samplers can't otherwise have initializers/constant
values, there shouldn't be a conflict.
v2: Propagate the new binding variable around too.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The "binding" qualifier only applies to UBO blocks and samplers, along
with arrays of those types. (It would also apply to images and atomic
counters, but we don't support those yet.)
This also validates sampler bindings against the maximum number of
texture units, and UBO bindings against the number of uniform buffer
binding points.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The idea of this code is to disallow layout(...) sections with the
deprecated "varying" or "attribute" keywords, unless a few select
extensions are enabled which allow a more relaxed check.
In order to detect a layout(...) section, the code checks for a number
of layout qualifiers. However, it failed to check for all of them,
which could lead to layout(...) not being detected when it should.
By replacing this with has_layout(), we properly check for all layout
qualifiers, and also guarantees that new qualifiers added in the future
will not be forgotten.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This is necessary for the parser to be able to accept precision
qualifiers not immediately adjacent to the type, such as "const highp
inout float foo".
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Currently, we store precision in ast_type_specifier, rather than
ast_type_qualifier. This works because precision is the last qualifier,
and immediately adjacent to the type.
Default precision statements (such as "precision highp float") are
represented as ast_type_specifier objects, with a boolean to indicate
that it's a default precision statement rather than an ordinary type.
ast_type_specifier::precision will be moving to ast_type_qualifier soon,
in order to support arbitrary qualifier ordering. However, we still
need to store a "this is a precision statement" flag /and/ the default
precision in ast_type_specifier.
This patch changes the boolean into a new field, default_precision.
If default_precision != ast_precision_none, it's a precision statement
with the specified precision. Otherwise, it's an ordinary type.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Vertex shader inputs are not allowed to be arrays until GLSL 1.50. We
were accidentally enabling them for GLSL 1.40 (although we haven't
written any tests for them, so it's not clear whether they actually
work).
NOTE: although this is a simple bug fix, it probably isn't sensible to
cherry-pick it to stable release branches, since its only effect is to
cause incorrectly-written shaders to fail to compile.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Required by GL_ARB_shading_language_420pack.
Parts based on work done by Todd Previte and Ken Graunke, implementing
basic support for C-style initializers of arrays.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Resolves the following gcc warnings
warning: 'iface_type_name' may be used uninitialized in this function
warning: 'var_mode' may be used uninitialized in this function
Note: The variables are initialised to UNKNOWN and ir_var_auto
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
