GLSL 1.50 spec says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that
program that have a static use gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must
have the same set of qualifiers."
This patch causes the shader link to fail if we have multiple fragment
shaders with conflicting layout qualifiers for gl_FragCoord.
V2: Restructure the code and add conditions to correctly handle the
following case:
fragment shader 1:
layout(origin_upper_left) in vec4 gl_FragCoord;
void main()
{
foo();
gl_FragColor = gl_FragData;
}
fragment shader 2:
layout(pixel_center_integer) in vec4 gl_FragCoord;
void foo()
{
}
V3:
Allow linking in the following case:
fragment shader 1:
void main()
{
foo();
gl_FragColor = gl_FragCoord;
}
fragment shader 2:
in vec4 gl_FragCoord;
void foo()
{
...
}
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently overlapping locations of input variables are not allowed for all
the shader types in OpenGL and OpenGL ES.
From OpenGL ES 3.0 spec, page 56:
"Binding more than one attribute name to the same location is referred
to as aliasing, and is not permitted in OpenGL ES Shading Language
3.00 vertex shaders. LinkProgram will fail when this condition exists.
However, aliasing is possible in OpenGL ES Shading Language 1.00 vertex
shaders."
Taking in to account what different versions of OpenGL and OpenGL ES specs
say about aliasing:
- It is allowed only on vertex shader input attributes in OpenGL (2.0 and
above) and OpenGL ES 2.0.
- It is explictly disallowed in OpenGL ES 3.0.
Fixes Khronos CTS failing test:
explicit_attrib_location_vertex_input_aliased.test
See more details about this at below mentioned khronos bug.
V2: Fix the case where location exceeds the maximum allowed attribute
location.
V3: Simplify the condition added in V2.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: Khronos #9609
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Now that we pass in gl_shader_compiler_options, it makes sense to just
use options->MaxUnrollIterations, rather than passing a separate
parameter.
Half of the invocations already passed options->MaxUnrollIterations,
while the other half passed in a hardcoded value of 32.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The next few patches will introduce an optimization that only works when
integers are not represented as floating point values.
v2: Re-word-wrap a line, as requested by Ian Romanick.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Grab the parsed invocation count, check for consistency
during linking, and finally save the result in
gl_shader_program Geom.Invocations.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
GL_ARB_ES2_compatibility doesn't say anything about shader linking
when one of the shaders (vertex or fragment shader) is absent. So,
the extension shouldn't change the behavior specified in GLSL
specification.
Tested the behavior on proprietary linux drivers of NVIDIA and AMD.
Both of them allow linking a version 100 shader program in OpenGL
context, when one of the shaders is absent.
Makes following Khronos CTS tests to pass:
successfulcompilevert_linkprogram.test
successfulcompilefrag_linkprogram.test
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Linker loops that iterate through all the stages in the pipeline need
to use MESA_SHADER_FRAGMENT as a bound, so that we can add an
additional MESA_SHADER_COMPUTE stage, without it being erroneously
included in the pipeline.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Rather than maintain separately named arrays and counts for vertex,
geometry, and fragment shaders, just maintain these as arrays indexed
by the gl_shader_type enum.
v2: When there is neither a vertex nor a geometry shader, set
prog->LastClipDistanceArraySize = 0, and clarify that the values is
not used.
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
Unnamed record types are assigned to separate types per stage, e.g. if
uniform struct { ... } a;
is defined in both vertex and fragment shader, two separate types will
result with different names. When linking the shader, this results in a
type conflict. However, there is no reason why this should not be
allowed according to GLSL specifications. Compare and match record types
when linking shader stages to avoid this conflict.
Reviewed-by: Matt Turner <mattst88@gmail.com>
When handling function calls, we often want to walk through the list of
formal parameters and list of actual parameters at the same time.
(Both are guaranteed to be the same length.)
Previously, we used a pattern of:
exec_list_iterator 1st_iter = <1st list>.iterator();
foreach_iter(exec_list_iterator, 2nd_iter, <2nd list>) {
...
1st_iter.next();
}
This was awkward, since you had to manually iterate through one of
the two lists.
This patch introduces a foreach_two_lists macro which safely walks
through two lists at the same time, so you can simply do:
foreach_two_lists(1st_node, <1st list>, 2nd_node, <2nd list>) {
...
}
v2: Rename macro from foreach_list2 to foreach_two_lists, as suggested
by Ian Romanick.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
foreach_iter and exec_list_iterators have been deprecated for some time now;
we just hadn't ever bothered to convert code to the newer foreach_list
and foreach_list_safe macros.
In these cases, we aren't editing the list, so we can use foreach_list
rather than foreach_list_safe.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
These are replaced with
ctx->Const.Program[MESA_SHADER_{VERTEX,FRAGMENT,GEOMETRY}]. In
patches to follow, this will allow us to replace a lot of ad-hoc logic
with a variable index into the array.
With the exception of the changes to mtypes.h, this patch was
generated entirely by the command:
find src -type f '(' -iname '*.c' -o -iname '*.cpp' -o -iname '*.py' \
-o -iname '*.y' ')' -print0 | xargs -0 sed -i \
-e 's/Const\.VertexProgram/Const.Program[MESA_SHADER_VERTEX]/g' \
-e 's/Const\.GeometryProgram/Const.Program[MESA_SHADER_GEOMETRY]/g' \
-e 's/Const\.FragmentProgram/Const.Program[MESA_SHADER_FRAGMENT]/g'
Suggested-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reduces confusion since gl_shader::Type is sometimes
GL_SHADER_PROGRAM_MESA but is more frequently
GL_SHADER_{VERTEX,GEOMETRY,FRAGMENT}. It also has the advantage that
when switching on gl_shader::Stage, the compiler will alert if one of
the possible enum types is unhandled. Finally, many functions in
src/glsl (especially those dealing with linking) already use
gl_shader_stage to represent pipeline stages; using gl_shader::Stage
in those functions avoids the need for a conversion.
Note: in the process I changed _mesa_write_shader_to_file() so that if
it encounters an unexpected shader stage, it will use a file suffix of
"????" rather than "geom".
Reviewed-by: Brian Paul <brianp@vmware.com>
v2: Split from patch "mesa: Store gl_shader_stage enum in gl_shader objects."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we had an enum called gl_shader_type which represented
pipeline stages in the order they occur in the pipeline
(i.e. MESA_SHADER_VERTEX=0, MESA_SHADER_GEOMETRY=1, etc), and several
inconsistently named functions for converting between it and other
representations:
- _mesa_shader_type_to_string: gl_shader_type -> string
- _mesa_shader_type_to_index: GLenum (GL_*_SHADER) -> gl_shader_type
- _mesa_program_target_to_index: GLenum (GL_*_PROGRAM) -> gl_shader_type
- _mesa_shader_enum_to_string: GLenum (GL_*_{SHADER,PROGRAM}) -> string
This patch tries to clean things up so that we use more consistent
terminology: the enum is now called gl_shader_stage (to emphasize that
it is in the order of pipeline stages), and the conversion functions are:
- _mesa_shader_stage_to_string: gl_shader_stage -> string
- _mesa_shader_enum_to_shader_stage: GLenum (GL_*_SHADER) -> gl_shader_stage
- _mesa_program_enum_to_shader_stage: GLenum (GL_*_PROGRAM) -> gl_shader_stage
- _mesa_progshader_enum_to_string: GLenum (GL_*_{SHADER,PROGRAM}) -> string
In addition, MESA_SHADER_TYPES has been renamed to MESA_SHADER_STAGES,
for consistency with the new name for the enum.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Also rename the "target" field of _mesa_glsl_parse_state and the
"target" parameter of _mesa_shader_stage_to_string to "stage".
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch replaces the following pattern:
foo bar[MESA_SHADER_TYPES] = {
...
};
With:
foo bar[] = {
...
};
STATIC_ASSERT(Elements(bar) == MESA_SHADER_TYPES);
This way, when a new shader type is added in a future version of Mesa,
we will get a compile error to remind us that the array needs to be
updated.
Reviewed-by: Brian Paul <brianp@vmware.com>
This argument was carrying the name of the shader target (as a
string). We can get this just as easily by calling
_mesa_shader_enum_to_string().
Reviewed-by: Brian Paul <brianp@vmware.com>
Previously, _mesa_glsl_shader_target_name() had an overload for GLenum
and an overload for the gl_shader_type enum, each of which behaved
differently. However, since GLenum is a synonym for unsigned int, and
unsigned ints are often used in place of gl_shader_type (e.g. in loop
indices), there was a big risk of calling the wrong overload by
mistake. This patch gives the two overloads different names so that
it's always clear which one we mean to call.
Reviewed-by: Brian Paul <brianp@vmware.com>
This patch moves following bitfields and variables to the data
structure:
explicit_location, explicit_index, explicit_binding, has_initializer,
is_unmatched_generic_inout, location_frac, from_named_ifc_block_nonarray,
from_named_ifc_block_array, depth_layout, location, index, binding,
max_array_access, atomic
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This patch moves following bitfields in to the data structure:
used, assigned, how_declared, mode, interpolation,
origin_upper_left, pixel_center_integer
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Data section helps serialization and cloning of a ir_variable. This
patch includes the helper bits used for read only ir_variables.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Previously, we stored an array of up to 16 additional shaders to link,
as well as a count of how many each shader actually needed.
Since the built-in functions rewrite, all the built-ins are stored in a
single shader. So all we need is a boolean indicating whether a shader
needs to link against built-ins or not.
During linking, we can avoid creating the temporary array if none of the
shaders being linked need built-ins. Otherwise, it's simply a copy of
the array that has one additional element. This is much simpler.
This patch saves approximately 128 bytes of memory per gl_shader object.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
If reparent_ir() is called on invalid IR, then there's a danger that
it will fail to reparent all of the necessary nodes. For example, if
the IR contains an ir_dereference_variable which refers to an
ir_variable that's not in the tree, that ir_variable won't get
reparented, resulting in subtle use-after-free bugs once the
non-reparented nodes are freed. (This is exactly what happened in the
bug fixed by the previous commit).
This patch makes this kind of bug far easier to track down, by
transforming it from a use-after-free bug into an explicit IR
validation error.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, we checked for interstage uniform interface block link
errors in validate_interstage_interface_blocks(), which is only called
on pairs of adjacent shader stages. Therefore, we failed to detect
uniform interface block mismatches between non-adjacent shader stages.
Before the introduction of geometry shaders, this wasn't a problem,
because the only supported shader stages were vertex and fragment
shaders, therefore they were always adjacent. However, now that we
allow a program to contain vertex, geometry, and fragment shaders,
that is no longer the case.
Fixes piglit test "skip-stage-uniform-block-array-size-mismatch".
Cc: "10.0" <mesa-stable@lists.freedesktop.org>
v2: Rename validate_interstage_interface_blocks() to
validate_interstage_inout_blocks() to reflect the fact that it no
longer validates uniform blocks.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v3: Make validate_interstage_inout_blocks() skip uniform blocks.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Add comments on the purpose of the auxiliary data structures.
Check for atomic counter overlaps. Use the contains_atomic()
convenience method. Add static assert with the number of expected
shader stages.
v3: Don't resize atomic arrays.
v4: Add comment on the reason why we don't resize atomic counter
arrays. Use 'strcmp(...) == 0' instead of '!strcmp(...)'.
v5 (idr): Don't use STL in the linker.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I made this a function (instead of a method of ir_variable) because it
made the change set smaller, and I expect that there will be an overload
that takes an ir_var_mode enum. Having both functions used the same way
seemed better.
v2: Add missing case for ir_var_system_value.
v3: Change the ir_var_mode_count case to just break. Move the assertion
and the return outside the switch-statment. In the unlikely event that
var->mode is an invalid value other than ir_var_mode_count, the
assertion will still fire, and in release builds we won't wind up
returning a garbage pointer. Suggested by Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
The main purpose of this patch is to increase readability of
the array code by introducing is_unsized_array() to glsl_types.
Some redundent is_array() checks are also removed, and small number
of other related clean ups.
The introduction of is_unsized_array() should also make the
ARB_arrays_of_arrays code simpler and more readable when it arrives.
V2: Also replace code that checks for unsized arrays directly with the
length variable
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
v3 (Paul Berry <stereotype441@gmail.com>): clean up formatting.
Separate whitespace cleanups to their own patch.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Since gl_ClipDistance is lowered from an array of floats to an array
of vec4's during compilation, transform feedback has special logic to
keep track of the pre-lowered array size so that attempting to perform
transform feedback on gl_ClipDistance produces a result with the
correct size.
Previously, this special logic always consulted the vertex shader's
size for gl_ClipDistance. This patch fixes it so that it uses the
geometry shader's size for gl_ClipDistance when a geometry shader is
in use.
Fixes piglit test spec/glsl-1.50/transform-feedback-type-and-size.
v2: Change the type of LastClipDistanceArraySize to "unsigned", and
clarify the comment above it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The unit tests added in the previous commits prove some things about the
state of some internal data structures. The most important of these is
that all built-in input and output variables have explicit_location
set. This means that link_invalidate_variable_locations doesn't need to
know the range of non-generic shader inputs or outputs. It can simply
reset location state depending on whether explicit_location is set.
There are two additional assumptions that were already implicit in the
code that comments now document.
- ir_variable::is_unmatched_generic_inout is only used by the linker
when connecting outputs from one shader stage to inputs of another
shader stage.
- Any varying that has explicit_location set must be a built-in. This
will be true until GL_ARB_separate_shader_objects is supported.
As a result, the input_base and output_base parameters to
link_invalidate_variable_locations are no longer necessary, and the code
for resetting locations and setting is_unmatched_generic_inout can be
simplified.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This will make it easier to unit test this function in successive
patches. Also, correct the prototype in linker.h. It was... wrong.
v2: Split the interface change from adding the unit tests. Suggested by
Paul.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Previously, Mesa followed the linkage rules outlined in the GLSL
1.20-1.40 specs, which (collectively) said that GLSL versions 1.10 and
1.20 could be linked together, but no other versions could be linked.
In GLSL 4.30, the linkage rules were relaxed so that any two desktop
GLSL versions can be linked together. This change was made because it
reflected the behaviour of nearly all existing implementations (see
Khronos bug 8463). Mesa was one of the few (perhaps the only)
exceptions to prohibit cross-linking of some GLSL versions.
Since the GLSL linkage rules were deliberately relaxed in order to
match the behaviour of existing implementations, it seems appropriate
to relax the rules in Mesa too (even though Mesa doesn't support GLSL
4.30 yet).
Note that linking ES and desktop shaders is still prohibited, as is
linking ES shaders having different GLSL versions.
Fixes piglit tests "shaders/version-mixing {interstage,intrastage}".
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
We were already setting the array size of unsized arrays that appeared
inside unnamed interface blocks, but we weren't updating
ir_variable::interface_type to reflect the new array size, causing
bogus link errors.
This patch causes array_sizing_visitor to keep track of all the
unnamed interface types it sees, and the ir_variables corresponding to
each one. After the visitor runs, a new function,
fixup_unnamed_interface_types(), adjusts each unnamed interface type
to correctly correspond with the array sizes in the ir_variables.
Fixes piglit tests:
- spec/glsl-1.50/execution/unsized-in-unnamed-interface-block-gs
- spec/glsl-1.50/execution/unsized-in-unnamed-interface-block-multiple
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Unsized arrays appearing inside named interface blocks now get a
proper size assigned by the array_sizing_visitor.
Fixes piglit tests:
- spec/glsl-1.50/execution/unsized-in-named-interface-block
- spec/glsl-1.50/execution/unsized-in-named-interface-block-gs
- spec/glsl-1.50/linker/unsized-in-named-interface-block
- spec/glsl-1.50/linker/unsized-in-named-interface-block-gs
- spec/glsl-1.50/linker/unsized-in-unnamed-interface-block-gs (*)
(*) is fixed by dumb luck--support for unsized arrays in unnamed
interface blocks will come in a later patch.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Starting with OpenGL 3.2 input limits and output limits for stages may
not match. This means they need to be accounted separately.
No piglit regressions.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This gives the compiler the chance to inline and not export class symbols
even in the absence of LTO. Saves about 60kb on disk.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@.intel.com>
This information will be useful in the i965 back end, since we can
save some compilation effort if we know from the outset that the
shader never calls EndPrimitive().
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
During compilation, we'll use this to determine built-in availability.
The plan is to have a single shader containing every built-in in every
version of the language, but filter out the ones that aren't actually
available to the shader being compiled.
At link time, we don't actually need this filtering capability: we've
already imported prototypes for every built-in that the shader actually
calls, and they're flagged as is_builtin(). The linker doesn't import
any additional prototypes, so it won't pull in any unavailable
built-ins. When resolving prototypes to function definitions, the
linker ensures the values of is_builtin() match, which means that a
shader can't trick the linker into importing the body of an unavailable
built-in by defining a suspiciously similar prototype.
In other words, during linking, we can just pass in NULL. It will work
out fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
A signature is a built-in if and only if builtin_info != NULL, so we
don't actually need a separate flag bit. Making a boolean-valued
method allows existing code to ask the same question while not worrying
about the internal representation.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
This patch extracts the following logic from
validate_vertex_shader_executable():
(a) Generate an error if the shader writes to both gl_ClipDistance and
gl_ClipVertex.
(b) Record whether the shader writes to gl_ClipDistance in
gl_shader_program for use by the back-end.
(c) Record the size of gl_ClipDistance in gl_shader_program for use by
transform feedback logic.
And moves it into a function that is shared between vertex and
geometry shaders.
Strictly speaking we only need to have shared logic for (b) and (c)
right now (since (a) only matters in compatibility contexts, and we're
only implementing geometry shaders in core contexts right now). But
the three are closely related enough that it seems sensible to keep
them together.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested by examining generated TGSI shaders from piglit/glsl-routing.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Henri Verbeet <hverbeet@gmail.com>
Tested-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Commit 7cfefe6965 introduced a check for whether linked->Type equals
GL_GEOMETRY_SHADER. However, linked may be NULL due to an earlier error
condition.
Since the entire function after the error path is (or should be) guarded
by linked != NULL checks, we may as well just return early and remove
the checks.
Fixes crashes in 9 Piglit tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Section 4.3.8.1 (Input Layout Qualifiers) of the GLSL 1.50 spec
contains some tricky rules for how the sizes of geometry shader input
arrays are related to the input layout specification. In essence,
those rules boil down to the following:
- If an input array declaration does not specify a size, and it
follows an input layout declaration, it is sized according to the
input layout.
- If an input layout declaration follows an input array declaration
that didn't specify a size, the input array declaration is given a
size at the time the input layout declaration appears.
- All input layout declarations and input array sizes must ultimately
match. Inconsistencies are reported as soon as they are detected,
at compile time if the inconsistency is within one compilation unit,
otherwise at link time.
- At least one compilation unit must contain an input layout
declaration.
(Note: the geom_array_resize_visitor class was contributed by Bryan
Cain <bryancain3@gmail.com>.)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This gets piglit's geometry-basic test running.
TODO: Still need to validate that the GS layout qualifiers don't get used
in places they shouldn't (like an interface block, or a particular shader
input or output)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
