This makes code future proof in case someone changes the type
and also avoids half masks (0x00000000FFFFFFFF) in case of
64bit variables.
Signed-off-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Reported-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18707>
Mainly renaming driver_id and similar fields to index to
better represent what they contain.
Signed-off-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18707>
This commit adds an extra check on the emitted ppp state by
adding an EMIT_MASK.
The mask is just a copy of the header at the beginning of the emit.
Each time a word is emitted the appropriate bit in the mask is
cleared and at the end we make sure that the mask is 0. If not,
we forgot the either clear a bit somewhere or emit some words.
This is intended to make it easier to find such errors.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18631>
We assume that the texturestate size is 0 so we don't emit a state
update for pds_state_ptr2 since the hw wouldn't use it based on
the 0 size. This commit adds an assert to make sure of that.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18631>
This commit appends dbsc commands to be executed in secondary
command buffers on vkCmdExecuteCommands().
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18631>
Use pvr_csb_write_value() and pvr_csb_write_struct() to have some
extra checks when writing pre-packed command/state words in
pvr_emit_ppp_state().
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18631>
This commit adds two helper macros to write control stream words
into raw buffers with some extra checks.
The new macros are renamed versions of the previous CS_WRITE() and
CS_PACK_WRITE() macros.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18631>
Previously `struct pvr_emit_state` was used to keep track of which
state update required emitting and the header was setup based on that.
This commit removes it so that we're instead setting up the header as
we go and we can emit it directly instead of decoding it based on the
emit_state (which is almost identical but with a few missing fields).
This commit also changes pvr_emit_ppp_state() so that each control
stream word is packed/emitted on its own instead of everything
being nested within the header pack. Making the code a bit easier
to follow.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18631>
As per section 33.3 ("Required Format Support") of the Vulkan 1.0 spec - see
tables 42 to 52.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18572>
This reverts commit 27c57b8650.
The driver doesn't always pack or emit words directly. In some
cases it might be desirable to store the struct equivalent for the
control word and emit/pack at a later stage. Thus reverting to
expose pvr_cmd_pack().
One such use case is in the following commit.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18124>
The templates will be used to flush fragment work at the
pipeline barrier. They will also be used in
vkCmdClearAttachments().
"pds_state" is a pointer to an array. This is done to prevent a
memcpy() patching the PDS state. Whenever the template requires
PDS state we will always be patching it so let's just pass a
pointer instead. Using a pointer here also allows to check (with a
NULL check) whether the pds state in the template was configured
prior to emitting.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18124>
It gets used to flush fragment work for a graphics pipeline
barrier.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18124>
On dbenable depth bias is enabled so we need to write the depth
bias data into the depth_bias_array (which gets uploaded to the
device) and also setup the depth bias index (used in the control
stream).
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18438>
Push descriptors are part of VK_KHR_push_descriptor.
Not supporting it for now.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18430>
Set the flag if the descriptor set is updated.
Set the fragment descriptor dirty flag if blend consts are updated.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18429>
In this case the attachment tex state will be 0, which should make things easier
to debug.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18320>
A VK_ERROR_FORMAT_NOT_SUPPORTED error was being returned when setting up the
image view tex state for images with the VK_IMAGE_USAGE_STORAGE_BIT and/or
VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT bit(s) set due to missing handling in
pvr_pack_tex_state(). Resolve this by handling these cases, while taking the
opportunity to simplify how the tex type is determined when packing
TEXSTATE_IMAGE_WORD0.
It was also found that the depth field in TEXSTATE_IMAGE_WORD1 was being set up
incorrectly, as it was relying on the image depth being 0 for 1D and 2D images,
but the image depth will always be 1 in these cases.
Partial fix for dEQP-VK.image.qualifiers.volatile.cube.r32f. This now goes from
failing to seg faulting when VK_FORMAT_R32_SFLOAT is added to the format table,
as the test is now getting further.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18320>
This now matches up with the value being returned for maxSamplerAnisotropy,
which is the unsupported limit of 1.
Fixes dEQP-VK.info.device_properties.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Rajnesh Kanwal <rajnesh.kanwal@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18320>
