This only implements the actual opcodes and does not implement support
for using them with specialization constants.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We handle forward declarations by creating the pointer type with it's
storage type based on storage class and just waiting to fill out the
actual deref type until we get the OpTypePointer. Because any
composites using the forward declared type only care about the storage
type (i.e. uint64_t, uvec2, etc.) when creating their glsl_type, this
works fine and we can defer the actual deref_type as far as we need.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This was valid back when the only valid types of pointers were uint32
and uvec2. Now that we're allowing more variety, it could be just about
anything so we'll just drop the assert.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
These correspond roughly to reading/writing OpenCL global pointers. The
idea is that they just take a bare address and load/store from it. Of
course, exactly what this address means is driver-dependent.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
During conversion type-length was lost due to math.
v2 (Jason Ekstrand):
- Use a size/offset of 4 bytes
Fixes: 44227453ec (nir: Switch to using 1-bit Booleans for almost everything)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109353
Signed-off-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Tested-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to allow nir_gather_xfb_info to be used on OpenGL,
specifically ARB_gl_spirv.
So, from OpenGL 4.6 spec, section 11.1.2.1, "Output Variables":
"outputs specifying both an *XfbBuffer* and an *Offset* are
captured, while outputs not specifying both of these are not
captured. Values are captured each time the shader writes to such
a decorated object."
This implies that are captured if both are present, and not if one of
those are lacking. Technically, it doesn't explicitly point that
having just one or the other is a mistake. In some cases, glslang is
adding some extra XfbBuffer without XfbOffset around, and mentioning
that technically that is not a bug (see issue#1526)
And for the case of Vulkan, as the same glslang issue mentions, it is
not clear if that should be a mistake or not. But even if it is a
mistake, it is not really needed to be checked on the driver, and we
can let the validation layers to check that.
v2: simplify explicit_xfb_buffer and explicit_offset checks (Jason).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Before, we were double-counting the component slots when we had a dvec3
or dvec4. Instead, just add them in once and manually offset the
recorded output offset.
Fixes: 19064b8c "nir: Add a pass for gathering transform feedback info"
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
If we have a transform feedback output like:
float[2] x2_out (VARYING_SLOT_VAR1.x, 0, 0)
which is lowered by nir_lower_io_arrays_to_elements to,
float x2_out (VARYING_SLOT_VAR1.x, 0, 0)
float x2_out@5 (VARYING_SLOT_VAR2.x, 0, 0)
We have to update the destination offset to avoid overwriting
the same value.
v2 (Jason Ekstrand):
- Compute the correct offsets for arrays of vectors and/or doubles
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
When a xfb buffer is explicitely declared on a varying
variable, we shouldn't remove it at link time.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Instead of setting interface_type to whatever the per-vertex type is, we
only set it on blocks. This allows later passes to tell the difference
between variables that are in blocks and those that aren't.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Instead of splitting every per-vertex struct, just split the ones that
are actually blocks. The reason for the split is so that we have
separate variables for separate locations, qualifiers, and builtin
decorations. The vulkan spec only allows these on members of blocks.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This is the "no offset specified" value.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Take away const qualifier from return type of these functions as
-Wignored-qualifiers points out it is ignored for these cases.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
vtn supports these, so don't squalk if user is happy with enabling
these.
v2: add new members sorted
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
used for CL kernels
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2: add assert to verify we have at least one valid bit_size
v3: fix use of load_front_face in nir_lower_two_sided_color and tgsi_to_nir
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
With OpenCL some system values match the address bits, but in GLSL we also
have some system values being 64 bit like subgroup masks.
With this it is possible to adjust the builder functions so that depending
on the bit_sizes the correct bit_size is used or an additional argument is
added in case of multiple possible values.
v2: validate dest bit_size
v3: generate hex values in python code
remove useless imports
rename and move bit_sizes
v4: add 1 to legal bit_sizes for front_face
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
fixes a couple of deqp tests (on nvc0 and potential other drivers):
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.highp.common_subexpression_3
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.mediump.common_subexpression_3
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_1
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_2
dEQP-GLES3.functional.shaders.invariance.lowp.common_subexpression_3
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
v2: rename nir_var_global to nir_var_mem_global
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Currently we only add a cache key for a shader once it is linked.
However games like Team Fortress 2 compile a whole bunch of shaders
which are never actually linked. These compiled shaders can take
up a bunch of memory.
This patch changes things so that we add the key for the shader to
the cache as soon as it is compiled. This means on a warm cache we
can avoid the wasted memory from these shaders. Worst case scenario
is we need to compile the shaders at link time but this can happen
anyway if the shader has been evicted from the cache.
Reduces memory use in Team Fortress 2 from 1.3GB -> 770MB on a
warm cache from start up to the game menu.
V2: only add key to cache when compilation is successful.
Acked-by: Marek Olšák <marek.olsak@amd.com>
Currently we only add a cache key for a shader once it is linked.
However games like Team Fortress 2 compile a whole bunch of shaders
which are never actually linked. These compiled shaders can take
up a bunch of memory.
This patch changes things so that we add the key for the shader to
the cache as soon as it is compiled. This means on a warm cache we
can avoid the wasted memory from these shaders. Worst case scenario
is we need to compile the shaders at link time but this can happen
anyway if the shader has been evicted from the cache.
Reduces memory use in Team Fortress 2 from 1.3GB -> 770MB on a
warm cache from start up to the game menu.
Acked-by: Marek Olšák <marek.olsak@amd.com>
This basically reverts c2bc0aa7b1.
By running the opts we reduce memory using in Team Fortress 2
from 1.5GB -> 1.3GB from start-up to game menu.
This will likely increase Deus Ex start up times as per commit
c2bc0aa7b1. However currently 32bit games like Team Fortress 2
can run out of memory on low memory systems, so that seems more
important.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Passes' function names, separated by comma, listed in NIR_SKIP
environment variable will be skipped in debug mode. The mechanism is
hooked into the _PASS macro, like NIR_PRINT.
The extra macro NIR_SKIP is available as a developer convenience, to
skip at pointer other than the passes entry points.
v2: Fix typo in NIR_SKIP macro. (Bas)
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Otherwise writes get propagated across atomics if no barrier is
used. Without barrier writes should still be visible in the same
invocation, so an atomic has to be considered a write.
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Fixes: b3c6146925 "nir: Copy propagation between blocks"
Fixes: 62332d139c "nir: Add a local variable-based copy propagation pass"
From @jekstrand's nir-1-bit-bool branch, with improved ior/inot lowering.
ior: fmax instead of fadd allows removing the fsat.
inot: seq(x, 0) can be better than fsub(1, x). On a2xx, it works better
with the scalar instruction set.
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Function's out variable could be an array dereferenced by an array:
func(v[w[i]]);
or something more complicated.
Copy index in any case.
Fixes: 76c27e47b9 ("glsl: Copy function out to temp if we don't directly ref a variable")
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of emitting all of the conditions for the cases of a switch
statement up-front, emit them on-the-fly as we emit the code for each
case. The original justification for this was that we were going to
have to build a default case anyway which would need them all. However,
we can just trust CSE to clean up the mess in that case. Emitting each
condition right before the if statement that uses it reduces register
pressure and, in one customer benchmark, reduces spilling and improves
performance by about 2x.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Even though no one's been brave enough to ever use this pass, I like to
keep it functionally working.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Instead of applying the workaround universally, detect semi-old GLSLang
via the generator ID and only enable the workaround on old GLSLang.
This isn't nearly as precise as one would like it to be because the
first GLSLang generator id version bump was on October 7, 2017 which is
about 1.5 years after the bug was fixed. However, it at least lets us
disable it for non-GLSLang and for more modern versions.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
A long time in a galaxy far far away, there was a GLSLang bug with how
it handled samplers passed in as function parameters. (The bug can be
found here: https://github.com/KhronosGroup/glslang/issues/179.)
Unfortunately, that version was shipped in several apps and has been
causing heartburn for our SPIR-V parser ever since.
Recent changes to NIR uncovered a moderately old bug in how we work
around this issue. In particular, we ended up with a deref_cast from
uniform to local which is not a no-op cast so nir_opt_deref wasn't
getting rid of the cast. The only reason why it worked before was
because someone just happened to call nir_fixup_deref_modes which
"fixed" the cast (that shouldn't be happening) and then a later round of
copy-prop would get rid of it. The fact that the deref_cast survived
that long without causing trouble for other parts of NIR is a bit
surprising.
Just whacking the mode of the pointer seems to fix it fairly
unobtrusively. Currently, only apps with this bug will have a local
variable containing an image or sampler.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109304
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
