The placement of new shader_info.tess members unnecessarily wastes
space by interspersing 64bit members between bitfields.
Fixes: f1dd81ae10 ("nir: Collect if shader uses cross-invocation or indirect I/O.")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4408>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4408>
If the shader is not a tesselation shader, then writing to the tess
member of the shaderinfo union will overwrite other members and crash.
Closes: #2722
Fixes: f1dd81ae10 ("nir: Collect if shader uses cross-invocation or indirect I/O.")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4408>
For Gen8-11, there are some restrictions around sampling from HiZ.
The Skylake PRM docs for RENDER_SURFACE_STATE::AuxiliarySurfaceMode
say:
"If this field is set to AUX_HIZ, Number of Multisamples must
be MULTISAMPLECOUNT_1, and Surface Type cannot be SURFTYPE_3D."
Fixes: dEQP-VK.geometry.layered.3d.*.readback
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2720
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Arcady Goldmints-Orlov <agoldmints@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4409>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4409>
Our shared runners are set up for concurrent jobs ~= CPUs / 4 (x86) or 8
(ARM). If you use more build processes than that, then jobs may be
fighting each other for shared system resources, possibly to the point of
failure (we've seen one of the runners OOM on some jobs before, though I'm
not sure if this was the cause).
To try to systematically prevent the problem, we make a ninja wrapper in
the containers that passes the -j flags, and set MAKEFLAGS in the
container builds. This doesn't cover make in non-container builds, but I
believe we don't have any of those.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3782>
Currently, if the PCI machinery fails, we return a NULL driver name.
In the past this has resulted in various workarounds.
To avoid those, fallback to loader_get_kernel_driver_name(). It's not
perfect, yet perfectly reasonable.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
Move the message to the function which fetches the name.
While here use the same DEBUG/WARNING approach like in the PCI case. The
current method spam a tad much, plus isn't consistent.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
Reoder the function a bit to make the code-flow more obvious and short.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
Currently that's the hard-coded maximum in the kernel, even though the
libdrm API allows for more. Latter is done with extendability in mind.
Allocate 64 pointers^Wdevices on stack for now. Making for shorter and
ever-so-slightly faster code.
v2: Use single MAX_DRM_DEVICES #define (Eric)
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com> (v1)
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
This reverts commit 1b87f4058d.
dlclose() of the handle is perfectly reasonable, a follow-up NULL
assignment is missing.
As-is this causes a leak for nearly every platform, since they call
dri2_load_driver* initially, followed by a second swrast fallback call.
Some platforms even loop through the existing drivers probing.
Revert the commit and add the NULL check.
Fixes: 1b87f4058d ("egl/dri2: Don't dlclose() the driver on dri2_load_driver_common failure")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
With earlier commit we've added a generic LIBGL_ALWAYS_SOFTWARE handling
yet did not consider that the existing codebase unconditionally errors
out when set. That was fixed with a latter commit, while the fix itself
added erroneous restriction for egl/drm.
As mentioned in the report - the feature was working for ages. It was a
Gnome developer who added kms_swrast support for gbm in the first place.
Admittedly kms_swrast is somewhat in the middle between traditional
swrast and HW drivers, regardless - reinstate support.
Fixes: 47273d7312 ("egl: set UseFallback if LIBGL_ALWAYS_SOFTWARE is set")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/165
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
Currently we set the logger only for DRI3. Even though it's used nearly
everywhere. For platforms where we don't the function is effectively a
no-op.
With this in place, LIBGL_DEBUG=verbose works across the board.
Fixes: d971a4230d ("loader: Factor out the common driver opening logic from each loader.")
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
We can get into src/glx only with with_glx == dri. Thus there's no point
in the secondary, nested, check - it's always true.
Cc: Dylan Baker <dylan@pnwbakers>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4084>
KHR_blend_equation_advanced_coherent isn't exposed on OpenGL ES 1.x
nor OpenGL versions prior to 30, so we shouldn't allow to query its
enum-states there either.
Fixes: 74ec39f66d ("mesa: add INTEL_blackhole_render")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/329>
This is definitely not the first time I've debugged why I'm getting swrast
on a device only to find out I'm not a member of the render node's group.
This does mean that you'll get a warning print even without EGL_LOG_LEVEL
set. This may be an issue if we expect people outside of the DRI node's
group to actually be using swrast instead of getting their permissions
fixed. Right now surfaceless throws a "libEGL warning: No hardware driver
found, falling back to software rendering" in that case anyway, so this is
just more informative.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3703>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3703>
A previous commit made sure we sent a BindGBSurface command at map time
rather than at unmap time for persistent memory. To be consistent, do the
same for forced coherent maps. This makes it possible to avoid the
explicit UpdateGBSurface at unmap time for discard maps and to instead rely
on the kernel's dirty-tracking mechanism at the cost of an additional flush.
Tested with SVGA_FORCE_COHERENT=1, piglit run quick. No regressions.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4399>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4399>
The kernel driver requires immediate notification using a
BindGBSurface command when a graphics coherent memory resource changes
backing MOB, so that it can start dirty-tracking the new MOB.
Since we always use graphics coherent memory for persistent memory, enqueue
and flush a BindGBSurface commmand at map time rather than at unmap time.
Since we're dealing with persistent memory, It's OK to flush while mapped.
This fixes an issue with gnome-shell / Wayland which uses persistent
memory together with discard maps when we advertise ARB_buffer_storage.
XWayland clients will render incorrectly.
Fixes: 71b43490dd ("svga: Support ARB_buffer_storage")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4399>
We need to lower them to something reasonable (ideally, the modifier
would be attached but we need to do something for the case it's not). We
specifically have to lower pre-sched as well, but we can do the lower
literally at schedule time for now (if this proves annoying, we can move
it earlier, but I want to leave room for modifier-aware copyprop should
that prove interesting).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4396>
This is bad for performance but we can't assume it's true without some
analysis, which we presently don't do. Leave it for future work and
don't break the present.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4396>
We'd like to wire in attributes and uniforms as inputs and look at the
varying as output for automatic testing on-device, building up a test
framework for us.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4396>
This emulates the functionality of shader_runner (built for kbase) using
the bifrost testing infrastructure so it runs on mainline. Ideally this
will let us test shaders from the assembler.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4396>
