According to the OpenGL ES 3.2 spec's description of GenerateMipmap:
"An INVALID_OPERATION error is generated if the levelbase array was not
specified with an unsized internal format from table 8.3 or a sized
internal format that is both color-renderable and texture-filterable
according to table 8.10."
Similar text exists in the ES 3.0 specification as well.
Our existing rules are pretty close, but miss a few things. The
OpenGL specification actually doesn't have any text about internal
format checking - our existing code comes from a Khronos bug report.
The ES 3.x spec provides a clearer description.
Fixes dEQP-GLES3.functional.negative_api.texture.generatemipmap and
dEQP-GLES2.functional.negative_api.texture.generatemipmap_zero_level
_array_compressed.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
OpenGL ES 3.x contains a table of sized internal formats and their
required properties. In particular, each format is marked as
"Color Renderable" or "Texture Filterable".
This patch introduces two functions that can be used to query the
information from that table.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Wide points and lines are not supposed to be clipped by the viewport.
Rather, they should be rendered, and any fragments outside of the
viewport should be discarded.
The traditional use case for this behavior is rendering moving wide
point particles. When the center of the point approaches the viewport
edge, clipping would make it pop out of view early.
Fixes:
- dEQP-GLES2.functional.clipping.point.wide_point_clip
- dEQP-GLES3.functional.clipping.point.wide_point_clip
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_center
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_corner
- dEQP-GLES3.functional.clipping.line.wide_line_clip_viewport_center
- dEQP-GLES3.functional.clipping.line.wide_line_clip_viewport_corner
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94453
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94454
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We're about to start allowing wide points/lines whose vertices are
outside the viewport past the clipper. This scissoring hack ensures
that any fragments generated are still restricted to the viewport.
It is not necessary on Gen8+ as those platforms already discard
fragments which are outside the viewport.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94453
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94454
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Similar to is_drawing_points().
v2: Account for isoline tessellation output topology.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
I need to use this in multiple source files.
v2: Rebase on TES output domain fix.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Thanks to James Legg for finding this!
From the ARB_tessellation_shader spec:
"The number of isolines generated is derived from the first outer
tessellation level; the number of segments in each isoline is
derived from the second outer tessellation level."
According to the PRM, "TF.LineDensity determines # lines" while
"TF.LineDetail determines # segments". Line Density is stored at
DWord 6, while Line Detail is at DWord 7. So, they're not reversed
like they are for triangles and quads.
Fixes Piglit's spec/arb_tessellation_shader/execution/isoline,
and about 24 dEQP isoline tests (with GL_EXT_tessellation_shader
hacked on - it's not normally enabled).
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94524
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Now that we implement tessellation shaders, the TES might be the last
stage enabled. If it's outputting points, then the primitive type
reaching the SF is points. We need to account for this.
Caught by Ilia Mirkin.
v2: Update dirty bit comment above caller (caught by Iago)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
[ Samuel Pitoiset: Trivial rebase conflict ]
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This makes use of the new state validation interface to be consistent
with 3d.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Reduce the amount of duplicated code by re-using
nv50_program_validate(). While we are at it, change the prototype to
return void. We don't check anymore if the translation fails but
improving the state validation is a long process.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
This exposes an interface for state validation that will be also used
to rework the compute validation path.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Patch provides a default for a set pbuffer surface size when
EGL_LARGEST_PBUFFER is used by the client. MIN2 macro is moved
to egldefines so that it can be shared.
Fixes following Piglit test:
egl-create-largest-pbuffer-surface
From EGL 1.5 spec:
"Use EGL_LARGEST_PBUFFER to get the largest available pbuffer
when the allocation of the pbuffer would otherwise fail."
Currently there exists no API to query largest available pixmap size
using xlib or xcb so right now this seems most straightforward way to
ensure that we fulfill above API and also we don't attempt to allocate
'too big' pixmap which might succeed on server side but not work in
practice when driver starts to use it as a texture.
v2: add more explanation about the change (Emil)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Removed bound_to_context. We now pick up the context from the screen
instead of the resource itself. The resource could be out-of-date
and point to a pipe that is already freed.
Fixes manywin mesa xdemo.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
The bitcasting which is possible with shader images (and texture views?)
requires that when the user specifies a sized internal format for a
texture, we really allocate that format. To this end:
(1) find_exact_format should ignore sized internal formats and
(2) some of the entries in the mapping table corresponding to sized
internal formats are reordered to use an RGBA format instead of
a BGRA one.
This fixes arb_shader_image_load_store-bitcast in the (work in progress)
ARB_shader_image_load_store implementation for radeonsi.
v2: don't change the mapping of GL_RGB10: the change caused a regression
because it preferred a format with an alpha channel, and GL_RGB10
is not among the supported formats for shader images
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Currently, configure script is forcing 'enable_asm' to be 'no'
whenever cross-compilation is performed on X86 host. This is
based on an assumption that target architecture is different
from host's (i.e. ARM). But there's always a case that we do
cross-compilation for target that is also X86 based just like
host in which same ASM codes will be supported. 'enable_asm'
should not be forced to be "no" anymore in this case.
v2: corrected commit message
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
In GL 4.4+ there is no guarantee that interpolation qualifiers will
match between stages so we cannot safely pack varyings using the
current packing pass in Mesa.
We also disable packing on outerward facing interfaces for SSO
because in ES we need to retain the unpacked varying information
for draw time validation. For desktop GL we could allow packing for
SSO in versions < 4.4 but its just safer not to do so.
We do however enable packing on individual arrays, structs, and
matrices as these are required by the transform feedback code and it
is still safe to do so.
Finally we also enable packing when a varying is only used for
transform feedback and its not a SSO.
This fixes all remaining rendering issues with the dEQP SSO tests,
the only issues remaining with thoses tests are to do with validation.
Note: There is still one remaining SSO bug that this patch doesn't fix.
Their is a chance that VS -> TCS will have mismatching interfaces
because we pack VS output in case its used by transform feedback but
don't pack TCS input for performance reasons. This patch will make the
situation better but doesn't fix it.
V4: fix out of order function params after rebase, make sure packing
still disabled in tess stages. Update comments as to why we disable
packing on SSO.
V3: ES 3.1 *does* require interpolation to match so don't disable
packing there. Rebased on master rather than on enhanced layouts
component packing series.
V2: Make is_varying_packing_safe() a function in the varying_matches
class, fix spelling (Matt) and make sure to remove the outer array
when dealing with Geom and Tess shaders where appropriate.
Lastly fix piglit regression in new piglit test and document the
undefined behaviour it depends on:
arb_separate_shader_objects/execution/vs-gs-linking.shader_test
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This will allow us to choose to ignore the disable which will be
useful for more fine grained control over when to enable or disable
packing.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For older extensions, there is an explanation first and the extension
name in brackets, like that:
Clamping controls (GL_ARB_color_buffer_float)
I inverted that so we have the extension first and then the explanation
in brackets, like that:
GL_ARB_color_buffer_float (Clamping controls)
It will help me later to parse the few extensions that use this syntax:
all drivers that support <GL_extension>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This fixes some exceptions I have to deal with in mesamatrix.net.
The extensions GL_ARB_texture_buffer_object had a comment between "DONE"
and the brackets.
And the extension GL_KHR_robustness (in GL 4.5 and GLES 3.1) was using
"90% done" instead of "in progress". The "90% done" is still here
though, but as an extension comment.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The "Status" column was misaligned in some GL sections.
This is a lot of diffs, but it's only spaces in the end.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Added a small guide on how to read and edit GL3.txt.
I think this would help as much the devs as the users reading this file.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Add layer support to export individual array layers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Add offset support to handle NV12 offsets as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
For exporting a specific layer of an array texture.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We are going to need this for EGL_EXT_image_dma_buf_import.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When we replace an expresion we have to compute bitsize information for the
replacement. We do this in two passes to validate that bitsize information
is consistent and correct: first we propagate bitsize from child nodes to
parent, then we do it the other way around, starting from the original's
instruction destination bitsize.
v2 (Iago):
- Always use nir_type_bool32 instead of nir_type_bool when generating
algebraic optimizations. Before we used nir_type_bool32 with constants
and nir_type_bool with variables.
- Fix bool comparisons in nir_search.c to account for bitsized types.
v3 (Sam):
- Unpack the double constant value as unsigned long long (8 bytes) in
nir_algrebraic.py.
v4 (Sam):
- Use helpers to get type size and base type from nir_alu_type.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
v2: Squash multiple commits addressing the new parameter in different
files so we don't break the build (Iago)
v3: Fix tgsi (Samuel)
v4: Fix nir_clone.c (Samuel)
v5: Fix vc4 and freedreno (Iago)
v6 (Sam)
- Fix build errors in nir_lower_indirect_derefs
- Use helper to get type size from nir_alu_type.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
