For render passes with multiple subpasses on gen7, we only fast-clear at
the top but an input attachment use can cause us to do a resolve in the
middle of the render pass. Once we've done so, we are no longer have a
fast-cleared surface so we can just set aux_usage to NONE.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
This patch adds missing error-checking and fixes resource leak in
allocation failure path on anv_CreateDevice()
v2: Fixes from Jason Ekstrand's review
a) Add missing destructors for all of the state pools on allocation
failure path
b) Add missing destructor for batch bo pools on allocation failure path
v3: Fixes from Emil Velikov's review
Add missing destructor for queue and scratch_pool on allocation failure
path
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
No intended change in behavior. Just a refactor.
v2: Replace vk_outarray_is_incomplete() with vk_outarray_status(). For
Jason.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We have a performance problem with dynamic buffer descriptors. Because
we are currently implementing them by pushing an offset into the shader
and adding that offset onto the already existing offset for the UBO/SSBO
operation, all UBO/SSBO operations on dynamic descriptors are indirect.
The back-end compiler implements indirect pull constant loads using what
basically amounts to a texelFetch instruction. For pull constant loads
with constant offsets, however, we use an oword block read message which
goes through the constant cache and reads a whole cache line at a time.
Because of these two things, direct pull constant loads are much faster
than indirect pull constant loads. Because all loads from dynamically
bound buffers are indirect, the user takes a substantial performance
penalty when using this "performance" feature.
There are two potential solutions I have seen for this problem. The
alternate solution is to continue pushing offsets into the shader but
wire things up in the back-end compiler so that we use the oword block
read messages anyway. The only reason we can do this because we know a
priori that the dynamic offsets are uniform and 16-byte aligned.
Unfortunately, thanks to the 16-byte alignment requirement of the oword
messages, we can't do some general "if the indirect offset is uniform,
use an oword message" sort of thing.
This solution, however, is recommended for a few of reasons:
1. Surface states are relatively cheap. We've been using on-the-fly
surface state setup for some time in GL and it works well. Also,
dynamic offsets with on-the-fly surface state should still be
cheaper than allocating new descriptor sets every time you want to
change a buffer offset which is really the only requirement of the
dynamic offsets feature.
2. This requires substantially less compiler plumbing. Not only can we
delete the entire apply_dynamic_offsets pass but we can also avoid
having to add architecture for passing dynamic offsets to the back-
end compiler in such a way that it can continue using oword messages.
3. We get robust buffer access range-checking for free. Because the
offset and range are baked into the surface state, we no longer need
to pass ranges around and do bounds-checking in the shader.
4. Once we finally get UBO pushing implemented, it will be much easier
to handle pushing chunks of dynamic descriptors if the compiler
remains blissfully unaware of dynamic descriptors.
This commit improves performance of The Talos Principle on ULTRA
settings by around 50% and brings it nicely into line with OpenGL
performance.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
During initial CCS bring-up, I discovered that you have to do a full CS
stall prior to doing a CCS resolve as well as afterwards. It appears
that the same is needed for fast-clears as well. This fixes rendering
corruptions on The Talos Principle on Sky Lake GT4. The issue hasn't
been demonstrated on any other hardware however, given that this appears
to be a "too many things in the pipe" problem, having it be easier to
reproduce on a system with more EUs makes sense. The issues with
resolves is demonstrable on a GT3 or GT2 so this is probably also a
problem on all GTs.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
The number of dynamic descriptors is limited by both the number of
descriptors and the total number of dynamic things. Because there isn't
a single "maximum dynamic things" limit, we need to divide by two so
that they can create the maximum of both UBOs and SSBOs.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
v2 [Emil Velikov]
- Various fixes and initial stab at the Android build.
- Keep the generation rules/EXTRA_DIST outside the conditional
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, we were depending on EGL for generating the headers and
providing the protocol symbols. However, since neither Vulkan driver
actually wants to link against EGL, this is kind of pointless. It also
creates a weird build dependency.
v2 [Jason]
- Add missing wsi/ prefix, MKDIR_GEN
v3 [Emil Velikov]
- include BUILT_SOURCES/generation rules outside of conditional
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Unused and we'll rework the way wayland-drm-client-protocol.h is
generated with later commit.
v2 [Emil]
- Also remove wayland-client.h
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is what comment above definition says and change fixes issue with
32bit build where BLOCK_POOL_MEMFD_SIZE is used as ftruncate parameter
and constant currently gets converted from 4294967296 to 0.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This should let Dota 2 run on debug builds though it will spew errors
like mad. Hopefully, Valve will get this fixed sooner rather than
later.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Over the course of driver development, we've come up with a number of
different schemes for adding giant blocks of asserts inside the driver.
This one is only being used once in anv_pipeline.c and the way it's
being used actually generates compiler warnings in release builds. This
commit drops the anv_validate macro and just puts the contents of the
one validation function in side of a "#ifdef DEBUG" guard.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Except for a few unimplemented things on gen7, we don't really have
stubs anymore so we should drop this. This commit replaces the few gen7
stub() calls with explicitly labeled finishme's and makes the sparse
binding stuff silently no-op or return a FEATURE_NOT_PRESENT error.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This acts identically to anv_finishme except that it only dumps out
these nice log messages if you run with INTEL_DEBUG=perf.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
While an input attachment may only take on one of those two layouts,
other depth/stencil attachments that use the same image may have
HiZ-enabled layouts. Improves the average frame rate on a release
candidate of a proprietary Vulkan benchmark by 9.94% over 3 runs on my
SKL GT4.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is needed to transition input attachments.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We'll loop through this array when performing automatic layout
transitions.
v2: Adjust formatting of an assignment (Jason Ekstrand)
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Don't allocate space for resolve attachments if the subpass has none.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We will be using the image layout. Store the full struct directly from
the user.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Due to recent commits, the sampler now bypasses the auxiliary HiZ buffer
when reading from a depth image subresource that is in the general
layout. Remove this unneeded resolve.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be used to sample a depth input attachment without having to
pass through the HiZ buffer.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
surf_usage is only useful to image views that may use HiZ buffers.
Storage image views don't use HiZ buffers.
v2: Update commit message and add an assertion.
Fixes: 055ff2ec52 ("anv: Replace anv_image_has_hiz() with ISL_AUX_USAGE_HIZ")
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Validate the inputs, verify that this image has a depth
buffer, use gen_device_info instead of
v2:
- Add parenthesis (Jason Ekstrand)
- Make parameters const
- Use gen_device_info instead of gen
- Pass aspect to missed function in transition_depth_buffer
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This function supersedes layout_to_hiz_usage().
v2:
- Don't find the optimal buffer for layout transitions (Jason Ekstrand).
- Pass the devinfo instead of the gen (Jason Ekstrand)
- Update the function documentation.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This allows us to allocate surface states from the command buffer when
pushing descriptor sets rather than allocating them through a
descriptor set pool.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We will need this declaration closer for readability later.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
According to the PRM description of the Depth field:
"This field specifies the total number of levels for a volume texture
or the number of array elements allowed to be accessed starting at the
Minimum Array Element for arrayed surfaces"
However, ISL defines array_len as the length of the range
[base_array_layer, base_array_layer + array_len], so it already represents
a value relative to the base array layer like the hardware expects.
v2: Depth is defined as a U11-1 field, so subtract 1 from
the actual value (Jason)
This fixes a number of new CTS tests that would crash otherwise:
dEQP-VK.pipeline.render_to_image.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We're about to use the build-id as the starting point for another SHA1
hash in the Intel Vulkan driver, and returning a pointer is far more
convenient.
Reviewed-by: Chad Versace <chadversary@chromium.org>
The following changes are implemented:
Add src/vulkan/Android.mk to build libmesa_vulkan_util
Android.mk: add src/vulkan to SUBDIR to build new module
intel/vulkan: fix libmesa_vulkan_util,vk_enum_to_str.h dependencies
Add -o OUTPUT_PATH option in src/vulkan/util/gen_enum_to_str.py script
Use -o OUTPUT_PATH option in automake generation rules for vk_enum_to_str.{c,h}
Fixes: e9dcb17 "vulkan/util: Add generator for enum_to_str functions"
Fixes: 8e03250 "vulkan: Combine wsi and util makefiles"
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov]
- Move parser within main()
- Use --outdir instead of -o
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise we'll fail to find the header and `make distcheck` will bail.
Fixes: e9dcb17962 ("vulkan/util: Add generator for enum_to_str functions")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
