check variable_storage() found the requested fs_reg.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Check intel_miptree_create() return value before using it as
a pointer.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Check calloc return value and report on error, also later skip
results handling if there was no memory to store results to.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This only makes any sense on the GS input or output layout declaration,
nowhere else.
Fixes the piglit tests:
* spec/glsl-1.50/compiler/incorrect-in-layout-qualifiers-with-variable-declarations.geom
* spec/glsl-1.50/compiler/incorrect-out-layout-qualifiers-with-variable-declarations.geom
* spec/glsl-1.50/compiler/layout-fs-no-output.frag
* spec/glsl-1.50/compiler/layout-vs-no-input.vert
* spec/glsl-1.50/compiler/layout-vs-no-output.vert
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we disallowed any combination of layout with interpolation,
invariant, or precise qualifiers. There is very little spec guidance on
exactly which combinations should be allowed, but with ARB_sso it's
useful to allow these qualifiers with rendezvous-by-location.
Since it's unclear exactly where the layout qualifier should appear when
combined with other qualifiers, we will allow it anywhere before the
auxiliary storage qualifier.
This allows enough flexibility for all examples I've seen, while keeping
the auxiliary-storage-qualifier / storage-qualifier pair together (as
they are a single qualifier in the spec prior to
ARB_shading_language_420pack)
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mesa has an optimization that converts expressions like "v.x + v.y + v.z
+ v.w" into dot(v, 1.0). And therein lies the rub: the other operand to
the dot-product is always a float... even if the vector is an ivec or
uvec. This results in an assertion failure in ir_builder.
If the base type of the operand is not float, don't try the
optimization. Dot-product is not valid on integer data.
Fixes piglit vs-integer-reduction.shader_test and OpenGL ES conformance
test ES2-CTS.gtf.GL2Tests.glGetUniform.glGetUniform.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Christoph Brill <egore911@gmail.com>
Fix the crash of "gnome-control-center info" invocation on QEMU where
zero height is passed at init.
(sroland: simplify logic by eliminating the div altogether, using 64bit mul.)
Fixes: https://bugzilla.novell.com/show_bug.cgi?id=879462
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
The emit_math?_gen? functions serve to implement workarounds for the
math instruction, none of which exist on Gen8+.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For the first use of a buffer, we will only need the temporary
resource in the case that a user wants to write/map to this buffer.
But in the cases where the user creates a buffer to act as an
output of a kernel, then we were creating an unneeded resource,
because it will contain garbage, and would be copied to the pool,
and destroyed when promoting.
This patch avoids the creation and copies of resources in
this case.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
The important part is the change of the condition to <= 0. Otherwise the loop
gets stuck never actually growing the pool.
The change in the aux-need calculation guarantees max 2 iterations, and
avoids wasting memory in case a smaller item can't fit into a relatively larger
pool.
Reviewed-by: Bruno Jiménez <brunojimen@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
The dst pointer needs to be initialized after any calls to
compute_memory_grow_pool, as the function might change the pool->vbo pointer.
This fixes crashes and assertion failures in two gegl tests.
Reviewed-by: Bruno Jiménez <brunojimen@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
nouveau screens are reused for the same device node. However in the
scenario where we create screen 1, screen 2, and then delete screen 1,
the surrounding code might also close the original device node. To
protect against this, dup the fd and use the dup'd fd in the
nouveau_device. Also tell the nouveau_device that it is the owner of the
fd so that it will be closed on destruction.
Also make sure to free the nouveau_device in case of any failure.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79823
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@ubuntu.com>
Previously, if we had something like:
gl_ViewportIndex = idx;
for(int i = 0; i < gl_in.length(); i++) {
gl_Position = gl_in[i].gl_Position;
EmitVertex();
}
EndPrimitive();
The right viewport index would not be set on the primitive because the
last vertex is the provoking one. However blob drivers appear to move
the gl_ViewportIndex write into the for loop, allowing the application
to be ignorant of this detail.
While the application is technically wrong here, because the blob does
it and other drivers appear to implicitly work this way as well, we add
a buffer register that viewport index writes go into, which is then
exported before every EmitVertex() call.
This fixes the remaining piglit tests in ARB_viewport_array for nv50/nvc0.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
The old logic would let all negative values go through unclamped, with
potentially disastrous results (probably trying to fetch viewport values
from random memory locations). GL has undefined rendering for vp indices
outside valid range but that's a bit too undefined...
(The logic is now the same as in llvmpipe.)
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Ilia Mirkin <imirkin@alum.mit.edu>
As far as I can tell, Broadwell doesn't need any of the SURFACE_STATE
workarounds for textureGather() bugs, so there's no need to emit
a second set of identical copies.
To keep things simple, just point the gather surface index base to the
same place as the texture surface index base.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
With commit 11e46a32ae and f9ebb1ea77 we resolved the symlink
generation required by the versioning of the library.
Although they incorrectly changed the way hardlinks are created by
linking to the ones from the build tree. If the device used for
building differs from the one set as destination linking will fail.
Reported-by: Andy Furniss <adf.lists@gmail.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Previously the blorp blitter would only be used if the format is identical or
there is only a difference between whether there is an alpha component or not.
This patch makes it also allow the blorp blitter if the only difference is the
ordering of the RGB components (ie, RGB or BGR).
This is particularly useful since commit 61e264f4fc because Mesa now
prefers RGB ordering for textures but the window system buffers are still
created as BGR. That means that the blorp blitter won't be used for the
(probably) common case of blitting from a texture to the window system buffer.
This doesn't cause any regressions in the FBO piglit tests on Haswell. On
Sandybridge it causes the fbo-blit-stretch test to fail but that is only
because it was failing anyway before the above commit and that commit hid the
problem.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68365
Reviewed-by: Matt Turner <mattst88@gmail.com>
In file included from ../../src/glsl/builtin_functions.cpp:61:0:
../../src/glsl/glsl_parser_extras.h:154:9: warning: unused parameter 'var' [-Wunused-parameter]
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Fix an off by one in the texture unit walk during texblend
setup on gen2. This caused the last enabled texunit to be
skipped resulting in totally messed up texturing.
This is a regression introduced here:
commit 1ad443ecdd
Author: Eric Anholt <eric@anholt.net>
Date: Wed Apr 23 15:35:27 2014 -0700
i915: Redo texture unit walking on i830.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The r600 equivalent of previous commit.
v2: Correctly include the radeon winsys/radeon_common.
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Similar to vdpau targets, we're going to convert the individual
target libraries into a single one.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Similar to previous commits, this allows us to minimise some
of the duplication by compacting all vdpau targets into a
single library.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Similar to previous commit, this allows us to minimise some
of the duplication by compacting all vdpau targets into a
single library.
v2: Include the radeon winsys only when there is a user for it.
v3: Correcly include the winsys. Now with extra brown bag :\
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Create a single library (for the vdpau api) thus reducing
the overall size of mesa. Current commit converts
vdpau-nouveau, with upcomming commits handling the rest.
The library can be built with the relevant pipe-drivers
statically linked in, or loaded as shared modules.
Currently we default to static.
Add SPLIT_TARGETS to guard the other VL targets.
Note: symlink handling is rather ugly and will need an
update to work with BSD and other non-linux platforms.
v2: Split the conversion into per-target basis.
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Thomas Helland <thomashelland90 at gmail.com>
Blob driver seems to need WFI in some cases after CP_EVENT_WRITE,
implying that this is asynchronous and should reset needs_wfi.
Also, CP_INVALIDATE_STATE seems to need WFI. But CP_LOAD_STATE
does not.
The blob driver also puts WFIs before writing GRAS_CL_VPORT registers.
The latter may be a work-around, as these registers should be banked/
context registers. I haven't yet found a lockup that this averts, but
I expect viewport to change infrequently so out of paranoia I will
keep these for now.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The spec doesn't actually mention adding this, but this is the usual
pattern so I'm assuming it's a spec bug.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
