The current approach of returning a setup instruction where additional
descriptor fields can be specified is still supported in order to keep
things working, but it will be removed later in this series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This replaces brw_set_message_descriptor() with the composition of
brw_set_desc() and a new inline helper function that packs the common
message descriptor controls into an integer. The goal is to represent
all message descriptors as a 32-bit integer which is written at once
into the instruction, which is more flexible (SENDS anyone?), robust
(see d2eecf0b0b fixing an issue
ultimately caused by some bits of the extended message descriptor
being left undefined) and future-proof than the current approach of
specifying the individual descriptor fields directly into the
instruction.
This approach also seems more self-documenting, since it will allow
removing calls to functions with way too many arguments like
brw_set_*_message() and brw_send_indirect_message(), and instead
provide a single descriptor argument constructed from an appropriate
combination of brw_*_desc() helpers.
Note that because brw_set_message_descriptor() was (conditionally?)
overriding fields of the instruction which strictly speaking weren't
part of the message descriptor, this involves calling
brw_inst_set_sfid() and brw_inst_set_eot() in some cases in addition
to brw_set_desc().
v2: Use SET_BITS macro instead of left shift (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Adds suppport for ARB_fragment_shader_interlock. We achieve
the interlock and fragment ordering by issuing a memory fence
via sendc.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Since all of the fs_generator::generate_foo methods take a fs_inst * as
the first parameter, just remove the name to quiet the compiler.
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_barrier(fs_inst*, brw_reg)’:
src/intel/compiler/brw_fs_generator.cpp:743:41: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_barrier(fs_inst *inst, struct brw_reg src)
^~~~
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_discard_jump(fs_inst*)’:
src/intel/compiler/brw_fs_generator.cpp:1326:46: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_discard_jump(fs_inst *inst)
^~~~
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_pack_half_2x16_split(fs_inst*, brw_reg, brw_reg, brw_reg)’:
src/intel/compiler/brw_fs_generator.cpp:1675:54: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_pack_half_2x16_split(fs_inst *inst,
^~~~
src/intel/compiler/brw_fs_generator.cpp: In member function ‘void fs_generator::generate_shader_time_add(fs_inst*, brw_reg, brw_reg, brw_reg)’:
src/intel/compiler/brw_fs_generator.cpp:1743:49: warning: unused parameter ‘inst’ [-Wunused-parameter]
fs_generator::generate_shader_time_add(fs_inst *inst,
^~~~
src/intel/compiler/brw_vec4_generator.cpp: In function ‘void generate_set_simd4x2_header_gen9(brw_codegen*, brw::vec4_instruction*, brw_reg)’:
src/intel/compiler/brw_vec4_generator.cpp:1412:52: warning: unused parameter ‘inst’ [-Wunused-parameter]
vec4_instruction *inst,
^~~~
src/intel/compiler/brw_vec4_generator.cpp: In function ‘void generate_mov_indirect(brw_codegen*, brw::vec4_instruction*, brw_reg, brw_reg, brw_reg, brw_reg)’:
src/intel/compiler/brw_vec4_generator.cpp:1430:41: warning: unused parameter ‘inst’ [-Wunused-parameter]
vec4_instruction *inst,
^~~~
src/intel/compiler/brw_vec4_generator.cpp:1432:63: warning: unused parameter ‘length’ [-Wunused-parameter]
struct brw_reg indirect, struct brw_reg length)
^~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These days, we're just passing a pointer to a prog_data field, which
we already have access to. We can just use it directly.
(In the past, it was a pointer to a separate value.)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This makes sure that the header-present bit of the message descriptor
is in sync with the IR instruction fields, which gives the optimizer
more control to avoid the overhead of setting up a message header when
it's possible to do so.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows representing conditional mods and predicates on f1.0-f1.1
at the IR level by adding an extra bit to the flag_subreg
backend_instruction field.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The old code used an array to store each "instruction group" (the new,
better name than the old overloaded "annotation"), and required a
memmove() to shift elements over in the array when we needed to split a
group so that we could add an error message. This was confusing and
difficult to get right, not the least of which was because the array
has a tail sentinel not included in .ann_count.
Instead use a linked list, a data structure made for efficient
insertion.
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I'm going to change the call in a later patch and with the difference in
indentation level it wasn't immediately obvious that the calls were
identical.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Allows the instructions to be compacted. The documentation claims that
some of these only accept UD types, even though the type doesn't change
the operation performed. Just normalize the types to ensure we get
instruction compaction.
The only functional changes are for FBL and CBIT (always use UD types)
and FBH (always use the same types).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow us to more easily run brw_validate_instructions() on
shader programs we find in GPU hang error states.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The regioning parameters are now properly set by convert_to_hw_regs()
and we don't need to fix them in the generator. That latter fix
previously done in the generator was strictly speaking wrong for any
non-identity regions.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Otherwise for a pack_double_2x32_split opcode, we emit:
vec1 64 ssa_135 = pack_double_2x32_split ssa_133, ssa_134
mov(8) g5<1>UD g5<4>.xUD { align16 1Q compacted };
mov(8) g7<2>UD g5<4,4,1>UD { align1 1Q };
ERROR: When the destination spans two registers, the source must span two registers
(exceptions for scalar source and packed-word to packed-dword expansion)
mov(8) g8<2>UD g5.4<4,4,1>UD { align1 2N };
ERROR: The offset from the two source registers must be the same
mov(8) g5<1>UD g6<4>.xUD { align16 1Q compacted };
mov(8) g7.1<2>UD g5<4,4,1>UD { align1 1Q };
ERROR: When the destination spans two registers, the source must span two registers
(exceptions for scalar source and packed-word to packed-dword expansion)
mov(8) g8.1<2>UD g5.4<4,4,1>UD { align1 2N };
ERROR: The offset from the two source registers must be the same
The intention was to emit mov(4)s for the instructions that have ERROR
annotations.
See tests/spec/arb_gpu_shader_fp64/execution/vs-isinf-dvec.shader_test
for example.
v2 (Samuel):
- Instead of setting the exec size to a fixed value, don't double it
(Curro).
- Add PICK_{HIGH,LOW}_32BIT to the condition.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Trivial rebase changes. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
On IVB, DF instructions have lowered the SIMD width to 4 but the
exec_size will be later doubled. Fix the assert to avoid crashing in
this case.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Simplify assert. Except for the 'inst->group % 4
== 0' part the assertion was redundant with the previous assertion. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This way we can set the destination type as double to all these new opcodes,
avoiding any optimizer's confusion that was happening before.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Drop no_spill workaround originally needed due to
the bogus destination type of VEC4_OPCODE_FROM_DOUBLE. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
When doing a 64-bit to a smaller data type size conversion, the destination should
be aligned to 64-bits. Because of that, we need to gather the data after the
actual conversion.
Until now, these two operations were done by VEC4_OPCODE_FROM_DOUBLE but
now we split them explicitely in two different instructions:
VEC4_OPCODE_FROM_DOUBLE just do the conversion and
VEC4_OPCODE_PICK_LOW_32BIT will gather the data.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
In the generator we must generate slightly different code for
Ivybridge/Baytrail, because of the way the stride works in
this hardware.
v2:
- Use stride and don't need to fix dst (Curro)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
We need to split DF instructions in two on IVB/BYT as it needs an
execsize 8 to process 4 DF values (one GRF in total).
v2:
- Rename helper and make it static inline function (Matt).
- Fix indention and add braces (Matt).
v3:
- Don't edit IR instruction when doubling exec_size (Curro)
- Add comment into the code (Curro).
- Manage ARF registers like the others (Curro)
v4:
- Add get_exec_type() function and use it to calculate the execution
size.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
[ Francisco Jerez: Fix bogus 'type != BAD_FILE' check. Take
destination type as execution type where there is no valid source.
Assert-fail if the deduced execution type is byte. Clarify comment
in get_lowered_simd_width(). Move SIMD width workaround outside of
'if (...inst->size_written > REG_SIZE)' conditional block, since the
problem should be independent of whether the amount of data written
by the instruction is greater or lower than a GRF. Drop redundant
is_ivb_df definition. Drop bogus inst->exec_size < 8 check.
Simplify channel group assertion. ]
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
2017-03-13 11:16:34 +00:00
Renamed from src/mesa/drivers/dri/i965/brw_vec4_generator.cpp (Browse further)
