Like all the other sends, it's just mlen * REG_SIZE.
Fixes: 3cbc02e469 "intel: Use TXS for image_size when we have..."
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
There are piles of fields that it doesn't check so using it is a lie.
The only reason why it's not causing problem is because it has exactly
one user which only uses it for MOV instructions (which aren't very
interesting) and only on Sandy Bridge and earlier hardware. Just get
rid of it and inline it in the one place that it's actually used.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
The next patch replaces an unsigned bitfield with a plain unsigned,
which triggers gcc to begin warning on signed/unsigned comparisons.
Keeping this patch separate from the actual move allows bisectablity and
generates no additional warnings temporarily.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are broken on a future platform, but it turns out we don't need
to fix them, since they're just type-converting moves with strided
source. Kill them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This legalization pass is meant to handle situations where the source
or destination regioning controls of an instruction are unsupported by
the hardware and need to be lowered away into separate instructions.
This should be more reliable and future-proof than the current
approach of handling CHV/BXT restrictions manually all over the
visitor. The same mechanism is leveraged to lower unsupported type
conversions easily, which obsoletes the lower_conversions pass.
v2: Give conditional modifiers the same treatment as predicates for
SEL instructions in lower_dst_modifiers() (Iago). Special-case a
couple of other instructions with inconsistent conditional mod
semantics in lower_dst_modifiers() (Curro).
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This seems to be a problem in combination with the lower_regioning
pass introduced by a future commit, which can modify a SIMD-split
instruction causing its execution size to become illegal again. A
subsequent call to lower_simd_width() would hit this bug on a future
platform.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Align16 is no longer a thing, so a new implementation is provided
using Align1 instead. Not all possible swizzles can be represented as
a single Align1 region, but some fast paths are provided for
frequently used swizzles that can be represented efficiently in Align1
mode.
Fixes ~90 subgroup quad swap Vulkan CTS tests.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
lower_integer_multiplication() implements 32x32-bit multiplication on
some platforms by bit-casting one of the 32-bit sources into two
16-bit unsigned integer portions. This can give incorrect results if
the original instruction specified a source modifier. Fix it by
emitting an additional MOV instruction implementing the source
modifiers where necessary.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The (-abs(x) >= 0) => (x == 0) optimization is removed from the vec4 and
scalar parts. In the VS part, adding the new pattern was not
helpful. The pattern that is removed is really old, and it has been
handled by NIR for ages.
All Gen7+ platforms had similar results. (Broadwell shown)
total instructions in shared programs: 14715715 -> 14715709 (<.01%)
instructions in affected programs: 474 -> 468 (-1.27%)
helped: 6
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 1.12% max: 1.35% x̄: 1.28% x̃: 1.35%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -1.40% -1.15%
Instructions are helped.
total cycles in shared programs: 559569911 -> 559569809 (<.01%)
cycles in affected programs: 5963 -> 5861 (-1.71%)
helped: 6
HURT: 0
helped stats (abs) min: 16 max: 18 x̄: 17.00 x̃: 17
helped stats (rel) min: 1.45% max: 1.88% x̄: 1.73% x̃: 1.85%
95% mean confidence interval for cycles value: -18.15 -15.85
95% mean confidence interval for cycles %-change: -1.95% -1.51%
Cycles are helped.
Iron Lake and Sandy Bridge had similar results. (Iron Lake shown)
total instructions in shared programs: 7780915 -> 7780913 (<.01%)
instructions in affected programs: 246 -> 244 (-0.81%)
helped: 2
HURT: 0
total cycles in shared programs: 177876108 -> 177876106 (<.01%)
cycles in affected programs: 3636 -> 3634 (-0.06%)
helped: 1
HURT: 0
GM45
total instructions in shared programs: 4799152 -> 4799151 (<.01%)
instructions in affected programs: 126 -> 125 (-0.79%)
helped: 1
HURT: 0
total cycles in shared programs: 122052654 -> 122052652 (<.01%)
cycles in affected programs: 3640 -> 3638 (-0.05%)
helped: 1
HURT: 0
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
We have to lower some shadow instructions because they don't exist in
hardware and we have to lower txb+offset+clamp because the message gets
too big and we run into the sampler message length limit of 11 regs.
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
This moves nir_shader_clone() to the driver-specific compile function,
rather than the shared src/intel/compiler code. This allows i965 to do
key-specific passes before calling brw_compile_*. Vulkan should not
need this cloning as it doesn't compile multiple variants.
We do need to continue cloning in the compute shader code because we
lower various things in NIR based on the SIMD width.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
This isn't true for Vulkan so we have to whack it to "main" in anv which
is silly. Instead of walking the list of functions and asserting that
everything is named "main" and hoping there's only one function named
"main", just use the nir_shader_get_entrypoint() helper which has better
assertions anyway.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This fixes a bug uncovered by my NIR integer division by constant
optimization series.
Fixes: 19f9cb72c8 "i965/fs: Add pass to propagate conditional..."
Fixes: 627f94b72e "i965/vec4: adding vec4_cmod_propagation..."
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
and _mesa_bitcount_64 with util_bitcount_64. This fixes a build problem
in nir for platforms that don't have popcount or popcountll, such as
32bit msvc.
v2: - Fix additional uses of _mesa_bitcount added after this was
originally written
Acked-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Previously, the back-end compiler turn image access into magic uniform
reads and there was a complex contract between back-end compiler and
driver about setting up and filling out those params. As of this
commit, both drivers now lower image_deref_load_param_intel intrinsics
to load_uniform intrinsics controlled by the driver and lower the other
image_deref_* intrinsics to image_* intrinsics which take an actual
binding table index. There are still "magic" uniforms but they are now
added and controlled entirely by the driver and that contract no longer
spans components.
This also has the side-effect of making most image use compile-time
binding table indices. Previously, all image access pulled the binding
table index from a uniform. Part of the reason for this was that the
magic uniforms made it difficult to decouple binding table indices from
the uniforms and, since they are indexed completely differently
(especially in Vulkan), it was hard to pull them apart. Now that the
driver is handling both, it's trivial to decouple the two and provide
actual binding table indices.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15166872 -> 15164293 (-0.02%)
instructions in affected programs: 115834 -> 113255 (-2.23%)
helped: 191
HURT: 0
total cycles in shared programs: 571311495 -> 571196465 (-0.02%)
cycles in affected programs: 4757115 -> 4642085 (-2.42%)
helped: 73
HURT: 67
total spills in shared programs: 10951 -> 10926 (-0.23%)
spills in affected programs: 742 -> 717 (-3.37%)
helped: 7
HURT: 0
total fills in shared programs: 22226 -> 22201 (-0.11%)
fills in affected programs: 1146 -> 1121 (-2.18%)
helped: 7
HURT: 0
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Split changes to the message type field to another patch. Suggested
by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
When the SIMD16 Gen4-5 fragment shader payload contains source depth
(g2-3), destination stencil (g4), and destination depth (g5-6), the
single register of stencil makes the destination depth unaligned.
We were generating this instruction in the RT write payload setup:
mov(16) m14<1>F g5<8,8,1>F { align1 compr };
which is illegal, instructions with a source region spanning more than
one register need to be aligned to even registers. This is because the
hardware implicitly does (nr | 1) instead of (nr + 1) when splitting the
compressed instruction into two mov(8)'s.
I believe this would cause the hardware to load g5 twice, replicating
subspan 0-1's destination depth to subspan 2-3. This showed up as 2x2
artifact blocks in both TIS-100 and Reicast.
Normally, we rely on the register allocator to even-align our virtual
GRFs. But we don't control the payload, so we need to lower SIMD widths
to make it work. To fix this, we teach lower_simd_width about the
restriction, and then call it again after lower_load_payload (which is
what generates the offending MOV).
Fixes: 8aee87fe4c (i965: Use SIMD16 instead of SIMD8 on Gen4 when possible.)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107212
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=13728
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Diego Viola <diego.viola@gmail.com>
Otherwise, only the first vec4 of a matrix or other complex type will
get marked as flat and we'll interpolate the others. This was caught by
a dEQP test which started failing because it did a SSO vs. non-SSO
comparison. Previously, we did the interpolation wrong consistently in
both versions. However, with one of Tim Arceri's NIR linkingpatches, we
started splitting the matrix input into vectors at link time in the
non-SSO version and it started getting correctly interpolated which
didn't match the broken SSO version. As of this commit, they both get
correctly interpolated.
Fixes: e61cc87c75 "i965/fs: Add a flat_inputs field to prog_data"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Explicitly convert to signed integer. Conversion is valid since is the
same (implicitly) used to initialize the loop. Avoids the warning:
../../src/intel/compiler/brw_fs.cpp: In member function ‘bool fs_visitor::lower_simd_width()’:
../../src/intel/compiler/brw_fs.cpp:5761:45: warning: comparison of integer expressions of different signedness: ‘int’ and ‘unsigned int’ [-Wsign-compare]
split_inst.eot = inst->eot && i == n - 1;
~~^~~~~~~~
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This makes the message length available at the IR level, which should
save some guesswork in a future commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
At the time of commit 7bc6e455e2 (i965: Add support for saturating
immediates.) we thought mixed type saturates would be impossible. We
were only thinking about type converting moves from D to F, for
example. However, type converting moves w/saturate from F to DF are
definitely possible. This change minimally relaxes the restriction to
allow cases that I have been able trigger via piglit tests.
Fixes new piglit tests:
- arb_gpu_shader_fp64/execution/built-in-functions/fs-sign-sat-neg-abs.shader_test
- arb_gpu_shader_fp64/execution/built-in-functions/vs-sign-sat-neg-abs.shader_test
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
There's no reason for us to emit it a pile of times and then have a
whole pass to clean it up. Just emit it once like we really want.
Reviewed-by: Matt Turner <mattst88@gmail.com>
v2 (Jason Ekstrand):
- Disallow gl_SampleId in SIMD32 on gen7
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
And handle 32-wide payload register reads in fetch_payload_reg().
v2 (Jason Ekstrand);
- Fix some whitespace and brace placement
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The original code manually handled splitting the MOVs to 8-wide to
handle various regioning restrictions. Now that we have a SIMD width
splitting pass that handles these things, we can just emit everything at
the full width and let the SIMD splitting pass handle it. We also now
have a useful "subscript" helper which is designed exactly for the case
where you want to take a W type and read it as a vector of Bs so we may
as well use that too.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reworks INTERPOLATE_AT_PER_SLOT_OFFSET to work more like an ALU
operation and less like a send. This is less code over-all and, as a
side-effect, it now properly handles execution groups and lowering so
SIMD32 support just falls out.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Commit 0d905597f fixed an issue with the placement of the zip and unzip
instructions. However, as a side-effect, it reversed the order in which
we were emitting the split instructions so that they went from high
group to low instead of low to high. This is fine for most things like
texture instructions and the like but certain render target writes
really want to be emitted low to high. This commit just switches the
order back around to be low to high.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: 0d905597f "intel/fs: Be more explicit about our placement of [un]zip"
