The two generators forked from each other, and they remain basically the
same. This rebases the radv version on the anv version, but with the
radv changes ported over. The result is that we get rid of the "cat |"
madness and gain mako, correct "generated by" attributions, and write
files out directly.
The only differences between the output is whitespace and comments.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
We can also use storage images internally for resolves, which don't
require TRANSFER_DST usage on the image, so currently we may not create
the needed descriptors.
Just create these descriptors unconditionally.
Fixes: 0e1886efb9 ("radv: Fix descriptors for cube images with VK_IMAGE_USAGE_STORAGE_BIT")
Reported-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for sharing semaphores using kernel syncobjects.
Syncobj backed semaphores are used for any semaphore which is
created with external flags, and when a semaphore is imported,
otherwise we use the current non-kernel semaphores.
Temporary imports from syncobj fd are also available, these
just override the current user until the next wait, when the
temp syncobj is dropped.
v2: allocate more chunks upfront, fix off by one after
previous refactor of syncobj setup, remove unnecessary null
check.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds syncobj create/destroy/export/import paths into
the winsys interface.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just a trivial enable.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Acked-by: Dave Airlie <airlied@redhat.com>
This bumps the libdrm requirement for amdgpu to the 2.4.82.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just introduces a central semaphore info struct, and passes it around,
and introduces some wrappers that will make porting off libdrm_amdgpu easier.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This looks like a regression from df30123794 ("radv: use
ac_compute_surface"). Before that, the opt4Space addrlib flag was set
to true unless the image has FMASK (ac_compute_surface will similarly
only set that flag for images without FMASK).
This saves multiple gigabytes of VRAM on one of our games, and brings
its VRAM utilisation on RADV in line with AMDGPU-PRO and NVIDIA.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jason updated the Khronos spec to explicitly state that Wayland surfaces
must support VK_PRESENT_MODE_MAILBOX_KHR.
ANV did so since day one (back in 2015)
Cc: mesa-stable@lists.freedesktop.org
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When using DCC some clear values don't require a cmask eliminate
step. This patch adds support for black and black with alpha 1,
there are other values, but I don't have access to a comprehensive list.
This works by setting the cmask eliminate predicate when doing the
fast clear, and later when doing the cmask elimination making sure
the draws are predicated.
This increases the fps on Sascha Willems deferred.
Tonga: 580fps->670fps on a Tonga PRO card.
Polaris 730->850fps
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We can only fast clear 128-bit images if the r/g/b channels
are the same, and we are using DCC.
For DCC we'll bail out on translate if this isn't true,
and we catch cmask clears explicitly.
v2: remove 64-bit block (Bas), add uint32 as well.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch uses addrlib to workout the tile swizzles according
to the surface index. It seems to produce the same values as
amdgpu-pro for the deferred test.
v2: don't apply swizzle to CMASK. the eg docs don't mention
it, and we clearly don't align cmask for that.
v3: disable surf index for dedicated images, as these will
most likely be shared, and I don't think the metadata has
space for this info in it yet.
v4: update for shareable images, rename combined_swizzle
to tile_swizzle
This gets the deferred demo from 730->950fps on my rx480.
(dcc cmask elim predication patches get it further)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some of the Sascha Willems demos pick a D32/S8 format for the depth
buffer, then do a LOAD_OP_CLEAR/LOAD_OP_DONT_CARE on it, which means
we don't get to merge the undefined->depth and clear htile transitions.
This add the stencil aspect to the pending clears if there is a depth
clear pending and the stencil aspect is don't care.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
To not confuse apps in thinking it might be faster.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
NV isn't valid for external images anymore.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Fixes: 6ddc64b93e "radv: Add support for VK_KHR_dedicated_allocation."
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
This effectively reverts commit 43a171878bb4b5aedb36a. Technically,
VK_KHR_get_memory_requirements2 and VK_KHR_dedicated_allocation are
required for the KHR version but this at least restores the removed
functionality. This patch builds but has received zero testing.
Acked-by: Dave Airlie <airlied@redhat.com>
Fished the SparseImage call out of the headers as the spec missed
the definition.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Dave Airlie <airlied@redhat.com>
These have been formally deprecated by Khronos never to be shipped
again. The KHR versions should be implemented/used instead.
Acked-by: Dave Airlie <airlied@redhat.com>
If a cube image has VK_IMAGE_USAGE_STORAGE_BIT set, the type in an image
view's descriptor was set to a 2D array (and a few other fields adjusted
accordingly). This is correct when the image view is actually bound as a
storage image, but not when bound as a sampled image. In that case the
type should be set as a cube.
Fix by generating 2 sets of descriptors at view creation time for both
storage and non-storage usage, and then choose between them based on
descriptor type when writing descriptor sets.
v2: Generate storage descriptors for images with TRANSFER_DST, since
those may be used as storage images internally.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This free was left in after dynamic descriptors were changed to not be
allocated separately from the descriptor set, and can cause a crash.
Fixes: 39644fa40a ("radv: Don't allocate dynamic descriptors separately")
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Rather than using 64k, use what addrlib returns as the base
alignment for vulkan allocations.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Figured out the clear value when we have a combined depth stencil
surface.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
For depth/stencil formats the surface layer allocates the
stencil separately, so we don't need to include it in the
bpe.
This reduces the side of d32s8 allocates to something closer to pro.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just modifies the API to make it easier to add other flags
to target machine creation.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This doesn't get used yet, it just adds support to various PKT3
emissions to enable it later.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have some cases where changing between depth and stencil only aspect
was causing hangs.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
I'm not 100% sure this is all wired up but it looks like it is.
v2: actually enable extension.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We implement the split opcodes, and tell NIR to lower the original ones.
The lowering to LLVM is a little more complicated, but NIR can optimize
the split ones a little better, and some NIR lowering passes that we
might want to use (particularly for doubles) emit the split ones.
This should fix pack/unpackDouble2x32, which seems like a bug since when
we enabled the Float64 capability. It will also fix pack/unpackInt2x32
when we enable the Int64 capability.
Fixes: 798ae37c ("radv: Enable Float64 support.")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This reorders things as we need something from the fs for the vs key.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Noticed in passing.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
coverity complains about the deref before NULL check.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Coverity pointed out this was returning uninitialised.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes trace dumping crash for SI or when RADV_DEBUG=noibs is set.
Fixes: 97dfff5410 "radv: Dump command buffer on hang."
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Before bcae327469 this was emitting CP DMA packet even on SI, but
apparently hasn't caused too many problems. After that commit the
CP DMA code now always sets the CIK+ only bit for prefetch. Just
follow radeonsi there and don't try to prefetch at all.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101334
Fixes: bcae327469 "radv: realign cp dma code with radeonsi"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The register header (and radeonsi comment) states V_411_SRC_ADDR_TC_L2
is for CIK+ only, so let's assert on earlier ASICs.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The shader reads the descriptor to decide if it should take the
fmask value, however we weren't initing it always, which meant
random crap, esp with MSAA depth textures.
Fixes random hangs with:
dEQP-VK.glsl.builtin_var.fragdepth.*
v2: check fmask_state is not NULL
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have some features that seem to slow things down or cause other
possible undesireable side effects, but it would be nice to test
games etc with them easily.
I forsee multisample DCC and maybe some shader opt changes using this.
For now use it for batch chaining.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This seems to matter here in a profile, without this we spend a lot
more time exiting this function with no flush bits.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just moves lots of stuff to the bind stage rather than
dealing with it in the draw stage.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
