Initial implementation missed various fields that derive from the
primitive topology. This patch fixes 3DSTATE_RASTER/3DSTATE_SF,
3DSTATE_CLIP and 3DSTATE_WM (gen7.x) emission in the dynamic case.
Fixes: f6fa4a8000 ("anv: add support for dynamic primitive topology change")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4924
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11379>
Validation layers should warn you about this
(VUID-VkBindBufferMemoryInfo-size-01037) but this would be useful for
zink debugging.
Requested by Zmike.
v2: Also check memoryOffset (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11542>
Right now the accumulator-clearing move emitted by the generator for
Wa_14010017096 inherits the SWSB field from the previous instruction.
This can lead to redundant synchronization, or possibly more serious
issues if the previous instruction had a TGL_SBID_SET SWSB
synchronization mode. Take the SWSB synchronization information from
the IR.
Fixes: a27542c5dd ("intel/compiler: Clear accumulator register before EOT")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11433>
This is unlikely to have had any negative side effect on the original
TGL, but will lead to issues on XeHP+ if the software scoreboard pass
isn't able to synchronize the accumulator writes.
Fixes: a27542c5dd ("intel/compiler: Clear accumulator register before EOT")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11433>
In cases where an in-order instruction is overwriting a register
previously read by another in-order instruction, drop the dependency
iff the previous read is guaranteed to have occurred from the same
in-order pipeline. This should only have an effect on XeHP+ since
previous Xe platforms only had one in-order FPU pipeline.
The previous workaround we were using for this treated all ordered
read dependencies as write dependencies to avoid noise from our
simulation environment. Relative to our previous workaround this
improves performance of GFXBench5 gl_tess by ~7% on a DG2 system
among other single-digit percentual FPS improvements.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11433>
The hardware fails to provide the expected data coherency guarantees
for accumulator registers when accessed from multiple FPU pipelines.
Fix this by tracking implicit accumulator accesses just like we do for
regular GRF registers, but instead of adding synchronization
annotations for any dependency we only do it for dependencies with a
pipeline mismatch, since the hardware should be able to guarantee
proper synchronization for matching pipelines.
Note that this workaround handles RaW and WaW dependencies in addition
to the WaR dependencies described in the hardware bug report even
though cross-pipeline RaW accumulator dependencies should be extremely
rare, since chances are the hardware will also hang if we ever hit
such a condition. This only affects XeHP+, since all FPU instructions
are executed as a single in-order pipeline on earlier Xe platforms.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11433>
This change reduces the precision of the scoreboard data structure for
accumulator registers, because the rules determining the aliasing of
accumulator registers are non-trivial and poorly documented (e.g. acc0
overlaps the storage of acc1 when the former is accessed with an
integer type). We could implement those rules but it wouldn't have
any practical benefit since we currently only use acc0-1, and for the
most part we can rely on the hardware's accumulator dependency
tracking. Instead make our lives easier by representing it as a
single register.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11433>
This is now 100% equivalent to the new rt_resume intrinsic.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
v2: Turn a bunch of pointer checks into checks against NULL (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
Upon looking at caching the raytracing shader (in particular the
trampoline one) I kind of got afraid that some of the keys used for
blorp would end up matching other keys. This is because blorp keys are
fairly simple. There is no SPIRV module hash included.
This change includes a "blorp" string at the beginning of the queue to
ensure we don't collide with other keys.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This allows us to convert a 64-bit address to an anv_address which is
useful for working with device addresses.
v2: switch to int64_t to keep state pool relative relocation working
on non-softpin platforms
v3: Update assert to reflect relative offsets (Jason)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This is required in order to be able to use GenXML pack functions for
structs with addresses when you're not packing into a batch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
These don't necessarily go in any group but are required for dispatch to
work properly. The trampoline is a compute shader that is the initial
start point for the trace. It's in charge of invoking the actual
ray-gen shader. The trivial return shader is used whenever another
shader is missing and it does no work except the minimum required to do
a stack return.
v2: Rebase on upstream changes (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This doesn't look too different from other compile functions we have in
anv_pipeline.c. The primary difference is that ray-tracing pipelines
have this weird two-stage thing where you have "stages" which are
individual shaders and "groups" which are sort of mini pipelines that
are used to handle hits. For any given ray intersection, only the hit
and intersection shaders from the same group get used together. You
can't have an intersection shader from group A used with an any-hit from
group B. This results in a weird two-step compile.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
Bindless shaders don't have binding tables so they have to get at the
descriptor sets via a different mechanism.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
They don't have binding tables so they have to use A64 descriptor set
access and everything has to be bindless all the time.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
Instead of depending on the driver to compile each resume shader
separately, we compile them all in one go in the back-end and build an
SBT as part of the shader program. Shader relocs are used to make the
entries in the SBT point point to the correct resume shader.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This commit adds a delta to be added to the relocated value as well as
the possibility of multiple types of relocations.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
They're common between the two drivers and we want to add a couple more
that get emitted from code in src/intel/compiler.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This just adds the core data structure which we'll build on going
forward.
v2: Add VK_EXT_pipeline_creation_cache_control handling (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This makes a bunch of loops use ARRAY_SIZE instead of MESA_SHADER_STAGES,
extends a few arrays, and adds a bunch of array length asserts.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This just adds a base struct and trivial implementations of all the
create/destroy/bind functions.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This makes dEQP-VK.api.version_check.entry_points pass and matches how
other drivers are handling this case. We do not support the feature but
still need to provide a dummy entrypoint.
v2: throw error if/when called (Jason)
Fixes: 0d031d1da3 ("anv: toggle on VK_EXT_extended_dynamic_state2")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11503>
For debug on Android, it's useful to be able to print shaders to the
android log interface, since you don't usually have stdout/stderr.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9262>
