LAVA jobs already have a global 1h timeout in GitLab. This exists because
GitLab jobs must start before we can determine whether a device is
available for testing.
Jobs themselves do not normally run that long, most of the delay comes
from waiting in the LAVA queue.
Dropping these overrides for pre-merge jobs fixes cases where the LAVA
job isn't picked up in time.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38395>
Slight differences due to different optimization order.
Totals from 135 (0.17% of 79839) affected shaders: (Navi48)
Instrs: 287852 -> 287527 (-0.11%); split: -0.15%, +0.03%
CodeSize: 1522972 -> 1521764 (-0.08%); split: -0.12%, +0.04%
Latency: 1806803 -> 1825754 (+1.05%); split: -0.08%, +1.12%
InvThroughput: 242693 -> 244703 (+0.83%); split: -0.02%, +0.84%
VClause: 4092 -> 4084 (-0.20%)
SClause: 7462 -> 7478 (+0.21%)
Copies: 20509 -> 20401 (-0.53%); split: -0.74%, +0.21%
Branches: 6395 -> 6386 (-0.14%)
PreSGPRs: 7334 -> 7337 (+0.04%); split: -0.03%, +0.07%
PreVGPRs: 6375 -> 6382 (+0.11%)
VALU: 151787 -> 151595 (-0.13%); split: -0.15%, +0.02%
SALU: 52967 -> 52910 (-0.11%); split: -0.23%, +0.12%
VMEM: 6704 -> 6696 (-0.12%)
SMEM: 12099 -> 12129 (+0.25%)
Tested on a small collection of 2518 shaders from Dredge with callgrind using RADV:
baseline:
nir_opt_algebraic was called 12917 times from radv_optimize_nir()
nir_opt_cse was called 15204 times from radv_optimize_nir()
relative time spent in radv_optimize_nir(): 31.48%
total instruction fetch cost: 28,642,638,021
with nir/algebraic: ad-hoc constant-fold ALU instructions
nir_opt_algebraic was called 12797 times from radv_optimize_nir()
nir_opt_cse was called 12963 times from radv_optimize_nir()
relative time spent in radv_optimize_nir(): 30.63%
total instruction fetch cost: 28,284,386,123
=> ~1.27% improvement in total compile times
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37195>
Since we don't support filmGrainSupport on previous of gen20 for AV1
decoding by default, failures start happening due to the video tests
assuming always FG supported, which is a fault of CTS.
Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37762>
If the FS has writes to multiple color outputs, but there are not enough
color attachments for them all, we may optimize out the exceeding ones.
With VK_KHR_dynamic_rendering_local_read, we were not respecting the
mapping from output to attachment set by the application, and the wrong
writes were getting eliminated.
Fixes future CTS tests: dEQP-VK.renderpasses.dynamic_rendering.primary_cmd_buff.local_read.remap_single_attachment*
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37531>
Partial results should be computed for all types of queries.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36916>
This avoids having to hardcode the proxy in the traces `download-url` or
jobs setting `PIGLIT_REPLAY_EXTRA_ARGS` and accidentally overriding the
default args when the author meant to append.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36955>
The nightly jobs can hit OOMs on JSL and ADL, so reduce the number of
threads used by deqp-runner to avoid that.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36608>
Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
ci: Downgrade to Linux 6.14 for venus-lavapipe jobs
In Linux 6.16 (and possibly 6.15 as well), the virtio gfx device
initialization seems to have regressed, resulting in device initialization
failure.
```
deqp-runner 0.20.3
+ deqp-runner suite --suite /builds/RickXy/mesa/install/deqp-venus.toml --output /builds/RickXy/mesa/results --skips /builds/RickXy/mesa/install/all-skips.txt /builds/RickXy/mesa/install/venus-skips.txt --flakes /builds/RickXy/mesa/install/venus-flakes.txt --testlog-to-xml /deqp-tools/testlog-to-xml --fraction-start 1 --fraction 60 --jobs 16 --baseline /builds/RickXy/mesa/install/venus-fails.txt
Error: Failed to invoke dEQP for dEQP-VK.info.device:
stdout:
Writing test log into /builds/RickXy/mesa/results/dEQP-VK.info.device
dEQP Core 3299a07b86cf0b15f86d1a441e323e515b15f255 (0x3299a07b) starting..
target implementation = 'Default'
stderr:
MESA-VIRTIO: debug: one of required kernel params (4 or 9) is missing
FATAL ERROR: vk.enumeratePhysicalDevices(instance, &numDevices, nullptr): VK_ERROR_INITIALIZATION_FAILED at vkQueryUtil.cpp:83
```
Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
ci: Drop the test from the fail list
It is reported to pass with Linux 6.16
```
Unexpected results:
07:33:07.167: KHR-GL46.sparse_texture2_tests.UncommittedRegionsAccess_texture_cube_map_r32i,Crash
07:33:07.167: spec@!opengl 1.1@streaming-texture-leak,UnexpectedImprovement(Pass)
```
Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
ci: Update zink-avn-adl flakes list
Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
ci: Add flake to zink-anv-adl skip list
Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
ci: Add api@clgetdeviceinfo to Intel fails list
This api call is failing for Intel as well, like many of the other
types.
Signed-off-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36493>
Add a new `iris-adl-traces-performance` job, which runs the same set of
traces as the `zink-anv-adl-traces-performance` job.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36074>
The `.profile-traces` template was nearly identical to
`.piglit-performance-base`, differing only by one additional variable.
Since all jobs extending `.piglit-performance-base` were already using
`EGL_PLATFORM: surfaceless`, that setting has been moved into the base
template, allowing `.profile-traces` to be simplified.
This also hides the performance traces jobs from non-Marge pipelines,
as intended.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36074>
The GitLab runner tags are case sensitive, and Flip-hatch's tag was
incorrectly lowercase. This prevented jobs from being picked up
by the runner.
Also remove an outdated note, as the device now appears to be stable.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35522>
The intel-adl-cl job was previously running on two DUTs, but the
runtime reported by deqp-runner was only about 3 minutes.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35574>
Introduce a new, pre-merge vkd3d-proton job on Alder Lake, and move the
VK_DRIVER variables to the .anv-test template.
Signed-off-by: Valentine Burley <valentine.burley@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35574>
For pre-merge pipelines, we know that we don't need to run the
container-check jobs unless image-tags.yml has been modified. In this
case, we can just skip the container jobs, because we 'know' that the
containers are present in the upstream repo.
For downstream or off-main pipelines, we still need to run the check
job, because the changed-file tracking is not reliable on other
branches, and because we may need to copy the container image from the
upstream container storage into the user's namespace.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35203>
