The ADD(diff, diff, fs_reg(-2u)) instruction reads diff, which is a
width 1 register. We need to read it as <0,1,0> with a subreg of 0,
which is what smear accomplishes.
Fixes assertion:
brw_eu_emit.c:285: validate_reg: Assertion `hstride == 0' failed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86974
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit f1adc45dbe)
Conflicts:
src/mesa/drivers/dri/i965/brw_fs.cpp
These computations don't have anything to do with the currently
executing channels, so they should use force_writemask_all.
This fixes assert failures.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86974
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit ef9cc7d0c1)
Conflicts:
src/mesa/drivers/dri/i965/brw_fs.cpp
This fixes the GL_COMPRESSED_RED_RGTC1 part of piglit's rgtc-teximage-01
test as well as the precision part of Wine's 3dc format test (fd.o bug
89156).
The Z component seems to contain a lower precision version of the
result, probably a temporary value from the decompression computation.
The Y and W component contain different data that depends on the input
values as well, but I could not make sense of them (Not that I tried
very hard).
GL_COMPRESSED_SIGNED_RED_RGTC1 still seems to have precision problems in
piglit, and both formats are affected by a compiler bug if they're
sampled by the shader with a swizzle other than .xyzw. Wine uses .xxxx,
which returns random garbage.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89156
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f710b99071)
Was resulting in gl_PointSize write being optimized out, causing
particle system type shaders to hang if hw binning enabled.
Fixes neverball, OGLES2ParticleSystem, etc.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
(cherry picked from commit 60096ed906)
This fixes ARB_texture_query_levels to actually return the desired
value.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit cb3eb43ad6)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8ac957a51c)
Fixes: 1f3ca56b ("freedreno: use util_copy_framebuffer_state()")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f3dfe6513c)
Piglit's spec/glsl-1.20/compiler/structure-and-array-operations/
array-selection.vert test contains the following code:
gl_Position = (pick_from_a_or_b ? a : b)[i];
where "a" and "b" are uniform vec4[2] variables.
ast_to_hir creates a temporary vec4[2] variable, conditional_tmp, and
generates an if-block to copy one or the other:
(declare (temporary) (array vec4 2) conditional_tmp)
(if (var_ref pick_from_a_or_b)
((assign () (var_ref conditional_tmp) (var_ref a)))
((assign () (var_ref conditional_tmp) (var_ref b))))
However, we failed to update max_array_access for "a" and "b", so it
remained 0 - here, the whole array is being accessed. At link time,
update_array_sizes() used this bogus information to change the types
of "a" and "b" to vec4[1]. We then had assignments from a vec4[1] to
a vec4[2], which is highly illegal.
This tripped assertions in nir_split_var_copies with scalar VS.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: mesa-stable@lists.freedesktop.org
(cherry picked from commit 9f1e250e77)
The yoffset needs to be interpreted as a slice offset for 1D array
textures. This patch implements that by moving the yoffset into
zoffset similar to how it moves the height into depth.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7286a68991)
Now that a layered source PBO is interpreted as a single tall 2D image
it's quite easy to accept the image height packing option by just
creating an image that is tall enough to include the image padding.
I'm not sure whether the image height property should affect 1D_ARRAY
textures. My intuition and interpretation of the GL spec (which is a
bit vague) would be that it shouldn't. However the software fallback
path in Mesa uses the property for packing but not for unpacking. The
binary NVidia driver uses it for both. This patch doesn't use it for
either case so it is different from the software fallback. There is
some discussion about this here:
http://lists.freedesktop.org/archives/mesa-dev/2015-February/077925.html
This is tested by the texsubimage Piglit test with the array and pbo
arguments. Previously this test was skipping this code path because it
always sets the image height.
I've also tested it by modifying the getteximage-targets test. It
wasn't using this code path before because it was using the default
texture object so this code couldn't successfully create a frame
buffer. I also modified it to add some image padding with the image
height in the PBO.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit a08bff1e98)
This reverts commit 546aba143d.
I think the changes to the calls to glBlitFramebuffer from this patch
are no different to what it was doing previously because it used to
set height to 1 before doing the blits. However it was introducing
some problems with the blit for layer 0 because this was no longer
special cased. It didn't fix problems with the yoffset which needs to
be interpreted as a slice offset. I think a better solution would be
to modify the original if statement to cope with the yoffset.
Conflicts:
src/mesa/drivers/common/meta_tex_subimage.c
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 7d10d2feee)
A layered PBO image is now interpreted as a single tall 2D image so
the z argument in _mesa_meta_bind_fbo_image is ignored. Therefore this
was just redundantly rebinding the same image repeatedly.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit a44606eb81)
For some given GLSL IR like (+ (neg x) (* 1.2 x)), the try_emit_mad
function would see that one of the +'s sources was a negate expression
and set mul_negate = true without confirming that it was actually a
multiply.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89315
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89095
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit d528907fd2)
[Emil Velikov: drop the changes in brw_vec4_visitor.cpp]
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Conflicts:
src/mesa/drivers/dri/i965/brw_fs_visitor.cpp
src/mesa/drivers/dri/i965/brw_vec4_visitor.cpp
This fixes a dEQP test failure. In the test,
glCopyTexSubImage2D was called with target = 0 and failed to throw
INVALID ENUM. This failure was caused by _mesa_get_current_tex_object(ctx,
target) being called before the target checking. To remedy this, target
checking was separated from the main error-checking function and
called prior to _mesa_get_current_tex_object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89312
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit ca65764d60)
This fixes a dEQP test failure. In the test,
glCompressedTexSubImage2D was called with target = 0 and failed to throw
INVALID ENUM. This failure was caused by _mesa_get_current_tex_object(ctx,
target) being called before the target checking. To remedy this, target
checking was made into its own function and called prior to
_mesa_get_current_tex_object.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89311
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit 549078cb5a)
Correctly set _BaseFormat field when creating a gl_renderbuffer
with EGLImage storage.
Change-Id: I8c9f7302d18b617f54fa68304d8ffee087ed8a77
Signed-off-by: Frank Henigman <fjhenigman@google.com>
Reviewed-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit e43729943e)
Nominated-by: Chad Versace <chad.versace@intel.com>
The shader-cache isn't finished, so the configure checks are a bit
premature and will only stand to confuse users of Mesa 10.5.0.
This is a squash of the follow four reverts:
Revert "Rename sha1.c and sha1.h to mesa-sha1.c and mesa-sha1.h"
Revert "configure: Add machinery for --enable-shader-cache (and --disable-shader-cache)"
Revert "sha1: Fix gcry_md_hd_t typo."
Revert "mesa: Add mesa SHA-1 functions"
Reviewed-by: Carl Worth <cworth@cworth.org>
A while back I switched intel_blit_framebuffer to prefer Meta over the
BLT. This meant that Gen8 platforms would start using the 3D engine
for blits, just like we do on Gen6-7.5.
However, I hadn't considered Gen4-5 when making that change. The BLT
engine appears to be substantially faster on 965GM than using Meta to
drive the 3D engine. This isn't too surprising: original Gen4 doesn't
support tile offsets (that came on G45), and the level/layer fields
don't work for cubemap rendering, so for inconvenient miplevel
alignments, we end up blitting or copying data to/from temporaries
in order to render to it. We may as well just use the blitter.
I chose to use the BLT on Gen4-5 because they use the same ring for
both 3D and BLT; Gen6+ splits it out.
Fixes regressions on 965GM due to botched tile offset code (we should
fix those properly as well, but they're longstanding bugs - for now,
put things back to the status quo).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89430
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit aa0705c06c)
The SSSE3 swizzling code was written for fast uploads to the GPU and
assumed the destination was always 16-byte aligned. When we began using
this code for fast downloads as well we didn't do anything to account
for the fact that the destination pointer given by glReadPixels() or
glGetTexImage() is not guaranteed to be suitably aligned.
With SSSE3 enabled (at compile-time), some applications would crash when
an SSE aligned-store instruction tried to store to an unaligned
destination (or an assertion that the destination is aligned would
trigger).
To remedy this, tell intel_get_memcpy() whether we're uploading or
downloading so that it can select whether to assume the destination or
source is aligned, respectively.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89416
Tested-by: Uriy Zhuravlev <stalkerg@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit 2e4c95dfe2)
With the split of the gallium egl module we had previously it required
access to some of the internal functions. As the only build (automake)
that did this no longer builds it we can now appropriately hide those
functions.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit dd438ae34b)
Would have at least prevented the crash the previous patch fixed.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=540970
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit ade0b580e7)
When built with Gentoo's package manager, the Mesa source directory
exists seven directories deep. The path to the .test file is too long
and is silently truncated, leading to a crash. Just use PATH_MAX.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=540970
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
(cherry picked from commit f5e2aa1324)
This fixes piglit when using PIGLIT_PLATFORM=gbm
Tom Stellard:
- Fix ARGB2101010 format
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chad Versace <chad.versace@intel.com>
(cherry picked from commit 65c8965d03)
Since commit 28f3f8d, indices generator take a start parameter. However, some
index values have been left to start at 0.
This fixes the glean/fbo test with the virgl driver, and copytexsubimage
with freedreno.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 073a5d2e84)
This is a fix for a regression introduced in commit a9f8296d ("i965/fs:
Preserve the CFG in a few more places.").
The errata this code works around is described in a comment before the function:
"[DevBW, DevCL] Errata: A destination register from a send can not be
used as a destination register until after it has been sourced by an
instruction with a different destination register.
The framebuffer write's sources must be in message registers, which SEND
instructions cannot have as a destination. There's no way for this
errata to affect anything at the end of the program. Just remove the
code.
Cc: 10.4, 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84613
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit e214000f25)
This takes "fbo-stencil blit GL_STENCIL_INDEX1/4/16" from crash to pass on
BDW.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
(cherry picked from commit c4925d7f3b)
Previously, there were bugs where if the app set a scissor it could affect
the area of the texture that was downloaded. There was also potential that
the framebuffer SRGB state could affect downloads. This ensures that those
will get saved/restored and can't affect the texture download.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89292
Reviewed-by: Neil Roberts <neil@linux.intel.com>
(cherry picked from commit b1ab02d9c0)
We could do better by tracking scratch reads and writes.
Cc: 10.5 <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88793
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
(cherry picked from commit da20bf068e)
Previously, we compared our new GS-out VUE map to the existing *VS*-out
VUE map, which is bogus.
This would mostly manifest as redundant dirty flagging where the GS is
in use but the VS and GS output layouts differ; but there is a scary
case where we would fail to flag a GS-out layout change if it happened
to match the VS-out layout.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: "10.5, 10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88885
(cherry picked from commit b51ff50a76)
It appears that all the other instructions that need it already use it.
This one just got missed.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b8a1637119)
The header is included in ../xmlpool.h. With the latter of which used
directly in a number of places in mesa.
Note that we can also add it (alongside t_option.h) to noinst_HEADERS,
but neither solution fixes the issue that brough us here - namely:
Do not regenerate the headers, if it already exists.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
I.e. add shared-glapi/glapi_mapi_tmp.h to the SOURCES list. Otherwise
there will be no knowledge that the file is required by others for the
build. Thus autotools won't pick it up for the distribution tarball.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Not required. Additionally this had the side effect of generating the
file, despite it's existence.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Some of the files generated were not in the SOURCES variable, thus
although generated prior to compilation the dependency tracking was
incomplete. The latter of which resulted in the files missing from the
distribution tarball.
Cc: "10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The file is auto-generated, and #included by formats.c. Let's rename it
to reflect the latter. This will also help up fix the dependency
tracking by adding it to the _SOURCES variable, without the side effect
of it being compiled (twice).
Cc: "10.4, 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
