Instead, we add a new helper which stomps one nir_shader and replaces it
with another. The new helper effectively just changes which pointer
gets used for the base nir_shader. It should be 99% as good at testing
cloning but without requiring that everything handle having the shader
swapped out from under it constantly.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108957
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rob Clark <robdclark@chromium.org>
When num_state_slots is 0, don't create the array. This was
triggering the following assert when running vkcube with
NIR_TEST_CLONE=1
vkcube: ../src/compiler/nir/nir_split_per_member_structs.c:66:
split_variable: Assertion `var->state_slots == NULL' failed.
Fixes: 9fbd390dd4 "nir: Add support for cloning shaders"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: remove & operator in a couple of memsets
add some memsets
v3: fixup lima
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
This commit adds new nir_load/store_scratch opcodes which read and write
a virtual scratch space. It's up to the back-end to figure out what to
do with it and where to put the actual scratch data.
v2: Drop const_index comments (by anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
We have a pass to lower global registers to locals and many drivers
dutifully call it. However, no one ever creates a global register ever
so it's all dead code. It's time we bury it.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All we ever do is initialize it to zero, clone it, print it, and
validate it. No one ever sets or uses it.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will allow us to make use of the selection control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Note this only supports if-statements as we dont support switches
in NIR.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
This will allow us to make use of the loop control support in
spirv and the GL support provided by EXT_control_flow_attributes.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108841
Values inside the offsets parameter of textureGatherOffsets are required to be
constants in the range of [GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET,
GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET].
As this range is never outside [-32, 31] for all existing drivers inside mesa,
we can simply store the offsets as a int8_t[4][2] array inside nir_tex_instr.
Right now only Nvidia hardware supports this in hardware, so we can turn this
on inside Nouveau for the NIR path as it is already enabled with the TGSI one.
v2: use memcpy instead of for loops
add missing bits to nir_instr_set
don't show offsets if they are all 0
v3: default offsets aren't all 0
v4: rename offsets -> tg4_offsets
rename nir_tex_instr_has_explicit_offsets -> nir_tex_instr_has_explicit_tg4_offsets
Signed-off-by: Karol Herbst <kherbst@redhat.com>
In order to stop continuously partially unrolling the same loop
we add the bool partially_unrolled to nir_loop, we add it here
rather than in nir_loop_info because nir_loop_info is only set
via loop analysis and is intended to be cleared before each
analysis. Also nir_loop_info is never cloned.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This pulls the guts of function inlining into a builder helper so that
it can be used elsewhere. The rest of the infrastructure is still
needed for most inlining cases to ensure that everything gets inlined
and only ever once. However, there are use-cases where you just want to
inline one little thing. This new helper also has a neat trick where it
can seamlessly inline a function from one nir_shader into another.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
We're going to have multiple functions, so nir_shader_get_entrypoint()
needs to do something a little smarter.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These correspond directly to SPIR-V's OpPtrAccessChain. As such, they
treat whatever their parent gives them as if it's the first element in
some array and dereferences that array. If the parent is, itself, an
array deref, then the two indices can just be added together to get the
final array deref. However, it can also be used in cases where what you
have is a dereference to some random vec2 value somewhere. In this
case, we require a cast before the ptr_as_array and use the ptr_stride
field in the cast to provide a stride for the ptr_as_array derefs.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This commit adds a concept to NIR of having a blob of constant data
associated with a shader. Instead of being a UBO or uniform that can be
manipulated by the client, this constant data considered part of the
shader and remains constant across all invocations of the given shader
until the end of time. To access this constant data from the shader, we
add a new load_constant intrinsic. The intention is that drivers will
eventually lower load_constant intrinsics to load_ubo, load_uniform, or
something similar. Constant data will be used by the optimization pass
in the next commit but this concept may also be useful for OpenCL.
v2 (Jason Ekstrand):
- Rename num_constants to constant_data_size (anholt)
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit completely reworks function calls in NIR. Instead of having
a set of variables for the parameters and return value, nir_call_instr
now has simply has a number of sources which get mapped to load_param
intrinsics inside the functions. It's up to the client API to build an
ABI on top of that. In SPIR-V, out parameters are handled by passing
the result of a deref through as an SSA value and storing to it.
This virtue of this approach can be seen by how much it allows us to
delete from core NIR. In particular, nir_inline_functions gets halved
and goes from a fairly difficult pass to understand in detail to almost
trivial. It also simplifies spirv_to_nir somewhat because NIR functions
never were a good fit for SPIR-V.
Unfortunately, there is no good way to do this without a mega-commit.
Core NIR and SPIR-V have to be changed at the same time. This also
requires changes to anv and radv because nir_inline_functions couldn't
handle deref instructions before this change and can't work without them
after this change.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This adds a concept of "members" to a variable with an interface type.
It allows you to specify the full variable data for each member of the
interface instead of once for the variable. We also add a lowering pass
to lower those variables to a sequence of variables and rewrite all the
derefs accordingly.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be removed at the end of the transition, but add some tracking
plus asserts to help ensure that lowering passes are called at the
correct point (pre or post deref instruction lowering) as passes are
converted and the point where lower_deref_instrs() is called is moved.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit adds a new instruction type to NIR for handling derefs.
Nothing uses it yet but this adds the data structure as well as all of
the code to validate, print, clone, and [de]serialize them.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
V2:
- updated to create a generic list clone helper nir_cf_list_clone()
- continue to assert on clone when fallback flag not set as suggested
by Jason.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This has bothered me for about as long as NIR has been around. Why do we
have two different unions for constants? No good reason other than one of
them is a direct port from GLSL IR.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
These were broken in e1af20f18a when the info field in nir_shader was
turned into a pointer.
Clone was copying the pointer rather than the data and nir_sweep was
cleaning up shader_info rather than claiming it.
Reviewed-by: Eric Anholt <eric@anholt.net>
When restoring something from shader cache we won't have and don't
want to create a nir_shader this change detaches the two.
There are other advantages such as being able to reuse the
shader info populated by GLSL IR.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_function(\([^,]*\),\s*\([^,]*\))/nir_foreach_function(\2, \1)/
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_instr(\([^,]*\),\s*\([^,]*\))/nir_foreach_instr(\2, \1)/
and similar expressions for nir_foreach_instr_safe etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2:
- Make the users to give the right bit_sizes as arguments (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Squash multiple commits addressing the new parameter in different
files so we don't break the build (Iago)
v3: Fix tgsi (Samuel)
v4: Fix nir_clone.c (Samuel)
v5: Fix vc4 and freedreno (Iago)
v6 (Sam)
- Fix build errors in nir_lower_indirect_derefs
- Use helper to get type size from nir_alu_type.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Previously we were receiving shared variable accesses via a lowered
intrinsic function from glsl. This change allows us to send in
variables instead. For example, when converting from SPIR-V.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When NIR was originally drafted, there was no easy way to determine if
something was constant or not. The result was that we had lots of
special-casing for constant values such as this. Now that load_const
instructions are SSA-only, it's really easy to find constants and this
isn't really needed anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Rob Clark <robclark@gmail.com>
This commit adds the capability to NIR to support separate textures and
samplers. As it currently stands, glsl_to_nir only sets the texture deref
and leaves the sampler deref alone as it did before and nir_lower_samplers
assumes this. Backends can still assume that they are combined and only
look at only at the texture index. Or, if they wish, they can assume that
they are separate because nir_lower_samplers, tgsi_to_nir, and prog_to_nir
all set both texture and sampler index whenever a sampler is required (the
two indices are the same in this case).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're about to separate the two concepts. When we do, the sampler will
become optional. Doing a rename first makes the separation a bit more
safe because drivers that depend on GLSL or TGSI behaviour will be fine to
just use the texture index all the time.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
