The current code... makes no sense. Use nouveau_bo_ref to attach the bo
to the exposed resource so as to have the proper lifetime guarantees.
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2c44043313)
With VP2, nv50_miptree is faked because the underlying bo's have to be
laid out in a certain way. This is done by adjusting the address. Make
sure that blits (and everything else for consistency) use the mt address
rather than the bo address as a base.
This fixes retrieving chroma plane with VDPAU.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82255
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9d52e551a5)
The mt address is about to be used more, make sure it's set
appropriately.
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2528d402b9)
When constant folding a MAD operation, we first fold the multiply and
generate an ADD. However we do so without making sure that the immediate
can be handled in the saturate case. If it can't, load the immediate in
a separate instruction.
Reported-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6c2b079231)
Experimentally, the sampler doesn't appear to like these, neither as
buffer nor as rect textures. So remove 1D from the list of texture types
to make linear when used for staging.
This fixes the OSD in mplayer for VDPAU.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 115d9a5525)
Samplers are only defined up to num_samplers, so set all samplers above
nr to NULL so that we don't try to read them again later.
Tested-by: Christian Ruppert <idl0r@qasl.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 362cd26960)
In certain circumstances, findFirstUses could end up doubling back on
instructions it had already processed, resulting in an infinite
recursion. Avoid this by keeping track of already-visited instructions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83079
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c4bb436f76)
Conflicts:
src/gallium/drivers/nouveau/codegen/nv50_ir_lowering_nvc0.h
This LLVM 3.6 commit changed EngineBuilder constructor.
commit 3f4ed32b4398eaf4fe0080d8001ba01e6c2f43c8
Author: Rafael Espindola <rafael.espindola@gmail.com>
Date: Tue Aug 19 04:04:25 2014 +0000
Make it explicit that ExecutionEngine takes ownership of the modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215967 91177308-0d34-0410-b5e6-96231b3b80d8
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit c04a6d5c29)
Nominated-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
(cherry picked from commit e28136343b)
Nominated-by: Marek Olšák <maraeo@gmail.com>
Conflicts:
src/gallium/auxiliary/gallivm/lp_bld_debug.cpp
// Marek - merged cce58147eb into this one
The initial firmware for hawaii does not support type3 nop packet.
Detect the new hawaii firmware with query RADEON_INFO_ACCEL_WORKING2.
If the returned value is 3, then the new firmware is used.
This patch uses type2 for the old firmware and type3 for the new firmware.
It fixes the cases when the old firmware is used and the user wants to
manually enable acceleration.
The two possible scenarios are:
- the kernel has no support for the new firmware.
- the kernel has support for the new firmware but only the old firmware
is available.
Additionaly this patch disables GPU acceleration on hawaii if the kernel
returns a value < 2. In this case the kernel hasn't the required fixes
for proper acceleration.
v2:
- Fix indentation
- Use private struct radeon_drm_winsys instead of public struct radeon_info
- Rename r600_accel_working2 to accel_working2
v3:
- Use type2 nop packet for returned value < 3
v4:
- Fail to initialize winsys for returned value < 2
Cc: mesa-stable@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 36771dc60f)
Conflicts:
src/gallium/winsys/radeon/drm/radeon_drm_winsys.c
Also squashed together with:
winsys/radeon: fix hawaii accel_working2 comment
accel_working2 returns 3 if the new firmware is used.
The comment wasn't updated in v3 of commit:
36771dc winsys/radeon: fix nop packet padding for hawaii
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64c379a3a8)
This makes sure to use a no-op swizzle while iteratively rendering each
level of a mipmap otherwise we may loose components and effectively
apply the swizzle twice by the time these levels are sampled.
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit c6f118484c)
Nominated-by: Kenneth Graunke <kenneth@whitecape.org>
A nomination unadorned with a specific version is now interpreted as
being aimed at the 10.3 branch, (which was recently opened).
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
We switched to these several stable releases ago, (since the MD5 algorithm has
been broken for some time), but only now did I get around to fixing this in
the Makefile rather than just performing this step manually.
CC: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 46d03d37bf)
cs_vertex_buffer_state.enabled_mask and
cs_vertex_buffer_state.dirty_mask are both updated when
r600_set_constant_buffer() is called, so we don't need to manually
update these values.
This fixes a crash with OpenCL programs that have a kernel with no
arguments.
https://bugs.freedesktop.org/show_bug.cgi?id=82671
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit bf7a60f41d)
This is a follow-on fix to commit 39b40ad144. Fixes a crash if the
user calls glDrawBuffers(0, NULL).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82814
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
(cherry picked from commit 31ce84a81f)
If ->sys is non-null, we might decide that it's where the data is
stored.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ef130b6050)
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 8867ffbf95)
This is required by the spec.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit ed3f7eadad)
The commit "radeonsi/compute: Stop leaking the input buffer" is not
meant for 10.2 as it relies on code that was never part of this
branch and breaks the build.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This will decrement the reference count for buffers referenced in the
command stream will prevent us from leaking them.
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 1e2e550671)
There is a hard limit in older kernels of 256 MB for buffer allocations,
so report this value as MAX_MEM_ALLOC_SIZE and adjust MAX_GLOBAL_SIZE
to statisfy requirements of OpenCL.
CC: "10.2" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 77ea58ca81)
The patch clears up the msse4.1 handling, yet mesa 10.2 lacks earlier
patches that this one relies on.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
The variable i915_C_FILES changed to i915_FILES with commit
34d4216e64 back in mesa 9.1/9.2. Yet we've missed to update the
the android build, essentially creating an dummy/empty driver that
can never work.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 5facd003a0)
The latter lacks various functionality used by mesa/glsl.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 07f583186d)
Upstream Android (system/core) has dropped these formats with commit
6bac41f1bf9(get rid of HAL pixelformats 5551 and 4444) yet does not
mention why.
These formats never really worked so we're safe to drop them as well.
Identical commit is available in the android-x86 external/mesa repo
commit 06a2d36edc
Author: Chih-Wei Huang <cwhuang@linux.org.tw>
Date: Wed Sep 25 01:16:57 2013 +0800
android: get rid of HAL pixelformats 5551 and 4444
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit dfa6dc5eb8)
Recent versions of bionic has picked up support for these functions,
leading to build issues due to the redefition of the symbols.
Note: wrapping things in #ifdef does not cut it :\
Identical patch is available in chromium, android-x86 and perhaps other
projects.
commit 66c1c789ce3407472de9ed620c9f815639058835
Author: rmcilroy@chromium.org
Date: Wed Apr 02 10:59:34 2014 +0000
Porting to x64 Android. Remove redefinitions of log2 and log2f.
BUG=
R=kbr@chromium.org
Review URL: https://codereview.chromium.org/216773005
commit 9cc0a0d2b0
Author: Chih-Wei Huang <cwhuang@linux.org.tw>
Date: Sun Jul 21 23:04:19 2013 +0800
android: remove log2, log2f
The functions are already defined in the latest bionic.
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
(cherry picked from commit 51a9a09ba8)
For all everyone willing to give the freedreno driver
a go they can now build it under Android.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 792041ebe5)
For all the people interested in testing the freedreno driver on
their Android devices. The next commit will hook these up within
the libEGL driver (via the gallium-egl backend).
There may be some rough edges but those can be sorted when a
willing builder/tester comes along.
v2:
- s/freefreno/freedreno/. Spotted by Matt Turner.
- Use the installed libdrm headers.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit bf05e06757)
Rather than including two extra folders only for two headers,
just prefix the headers and be done with it.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Cc: Rob Clark <robclark@freedesktop.org>
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 458d03a4a4)
Conflicts:
src/gallium/drivers/freedreno/Makefile.am
- link against libdrm_radeon
- link the r600 driver against libstlport
- linkin the newly added libmesa_pipe_radeon library
required by r600 and radeonsi drivers
v2: Include pipe_radeon after pipe_r600/radeonsi.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Split up and add commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit aae453afe8)
- include the correct folders
- add a new buildscript for the common radeon folder
v2: Use the installed libdrm headers over the DRM_TOP ones.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
[Emil Velikov] Split up and add commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 5bbfa308c9)
For a while the nouveau pipe driver has been a static library
and it has been using STL for even longer.
Correct add the link and cleanup the gallium_DRIVERS.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 825fa2873f)
nouveau uses STL for a while now thus we need to include
external/stlport/libstlport.mk in order to get the build
at least partially working.
v2: Use the installed libdrm headers over the DRM_TOP ones.
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 6b510c6338)
The former is the only user of the latter. As such building gbm
without egl makes little to no sense.
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
(cherry picked from commit 1d1ec76bdf)
Instead of catching the special case early, handle it by constructing a
fake gl_texture_image that will cause the values required by the OpenGL
4.0 spec to be returned.
Previously, calling
glGenTextures(1, &t);
glBindTexture(GL_TEXTURE_2D, t);
glGetTexLevelParameteriv(GL_TEXTURE_2D, 0, 0xDEADBEEF, &value);
would not generate an error.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Suggested-by: Brian Paul <brianp@vmware.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
(cherry picked from commit ee58c71a65)
