While we can clean this up later, it's trivial to not generate the
stupid code in the first place, which saves some optimization work.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
These will be lowered by nir_lower_tex() with the
lower_tex_when_implicit_lod_not_supported, so don't need the extra
handling here.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Move the scalar-region conversion from the IR to the generator, so it
doesn't affect the Gen11 path. We need the non-scalar regioning
for a later lowering pass that we are adding.
v2: Better commit message (Matt)
Reviewed-by: Matt Turner <mattst88@gmail.com>
Commit ad98fbc217 ("intel/fs: Refactor code generation for nir_op_fsign
to its own function") criss-crossed with c2b8fb9a81 ("anv/device:
expose VK_KHR_shader_float16_int8 in gen8+"), and I was not paying
enough attention when I rebased. This adds back the float16 changes and
enables the optimization.
v2: Incorporate more changes from 19cd2f5deb and a8d8b1a139 that I
missed in the previous version.
Fixes: ad98fbc217 ("intel/fs: Refactor code generation for nir_op_fsign to its own function")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110474
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
We add two new texture sources for bindless surface and sampler handles.
Bindless surface handles are expected to be pre-shifted so that the
20-bit surface state table index is in the top 20 bits of the 32-bit
handle. This lets us avoid any extra shifts in the shader. Bindless
sampler handles are 32-byte aligned byte offsets from general state base
address. We use 32-byte aligned instead of 16-byte aligned to avoid
having to use more indirect messages than needed. It means we can't
tightly pack samplers but that's probably not a big deal.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Normally fsign generates -1, 0, or +1. The new scale factor, S, causes
fsign to generate -S, 0, or +S.
v2: Rebase on v2 changes in previous commit.
v3: Rebase on 85c35885b3 ("nir: Rework nir_src_as_alu_instr to not take
a pointer").
Reviewed-by: Matt Turner <mattst88@gmail.com> [v2]
Other nir_src_as_* functions just take a nir_src. It's not that much
more memory copying and the constness preserving really isn't worth the
cognitive dissonance.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Now that we have the regioning lowering pass we can just put all of these
opcodes together in a single block and we can just assert on the few cases
of conversion instructions that are not supported in hardware and that should
be lowered in brw_nir_lower_conversions.
The only cases what we still handle separately are the conversions from float
to half-float since the rounding variants would need to fallthrough and we
are already doing this for boolean opcodes (since they need to negate), plus
there is also a large comment about these opcodes that we probably want to
keep so it is just easier to keep these separate.
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2:
- make 16-bit be its own separate case (Jason)
v3:
- Drop the result_int temporary (Jason)
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There are some hardware restrictions that brw_nir_lower_conversions should
have taken care of before we get here.
v2:
- rebased on top of regioning lowering pass
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since we handle booleans as integers this makes more sense.
v2:
- rebased to incorporate new boolean conversion opcodes
v3:
- rebased on top regioning lowering pass
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v2)
Going forward having these split is a bit more convenient since these two
groups have different restrictions.
v2:
- Rebased on top of new regioning lowering pass.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: remove & operator in a couple of memsets
add some memsets
v3: fixup lima
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
In the old code, we would generate the exact same instruction for
extract_u8(some_u64, 0) and extract_u8(some_u64, 1). The mask-a-word
trick only works for even numbered bytes.
This fixes the (new) piglit test
tests/spec/arb_gpu_shader_int64/execution/fs-ushr-and-mask.shader_test.
v2: Use a SHR instead of an AND. This saves an instruction compared to
using two moves. Suggested by Jason.
Fixes: 6ac2d16901 ("i965/fs: Fix extract_i8/u8 to a 64-bit destination")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We need more space than just a 32-bit scalar and we have to burn all
that space anyway so we may as well expose it to the driver. This also
fixes a subtle bug when UBOs and SSBOs have different pointer types.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
On Gen 8 and 9, "mul" instruction supports 64 bit destination type. We
can reduce our 64x64 int multiplication from 4 instructions to 3.
Also instead of emitting two mul instructions, we can emit single mul
instuction and extract low/high 32 bits from 64 bit result for
[i/u]mulExtended
v2: 1) Allow lower_mul_high64 to use new opcode (Jason Ekstrand)
2) Add lower_mul_2x32_64 flag (Matt Turner)
3) Remove associative property as bit size is different (Connor
Abbott)
v3: Fix indentation and variable naming convention (Jason Ekstrand)
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This ran afoul of Iris's use of nir_lower_clamp_color_outputs which
applies fsat() before writes to vertex shader color outpus.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes: 7725d60938 ("intel/fs: Emit better code for b2f(inot(a)) and b2i(inot(a))")
Other places will need to do this soon to properly handle source
swizzles. The patch looks a little odd, but the change is pretty
straight forward. All of the swizzle and mask handling is moved out,
but the code for handling move instructions and vecN instructions
remains in nir_emit_alu.
I'm not terribly pleased with the "need_dest" parameter, but
get_nir_dest is (somewhat surprisingly) destructive. I am open to
suggestions of alternatives.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All of the actual abstraction (except possibly setting size_written)
happens as part of the logical opcodes. The only thing that the surface
builder is providing at this point is extra levels of functions to call
through. I'm going to be adding bindless image support soon and all the
extra abstraction here is just getting in the way.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This fixes a bug in runscape where we were optimizing x >> 16 to an
extract and then negating and converting to float. The NIR to fs pass
was dropping the negate on the floor breaking a geometry shader and
causing it to render nothing.
Fixes: 1f862e923c "i965/fs: Optimize float conversions of byte/word..."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109601
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Drops one instruction from fs-sign-int.shader_test. No change in
shader-db due to it having 0 instances of sign(genIType). This may hurt
isign64 if algebraic runs before int64 lowering, but I wasn't sure how to
mark the algebraic opt as "every bit size but 64".
v2: Update commit message about shader-db.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
It's more clear and means we don't have to update the array every time
we add an optional texture instruction argument
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Missing check for shader stage in the fs_visitor would corrupt the
cs_prog_data.push information and trigger crashes / corruption later
when uploading the CS state.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The original idea was that the backend compiler could eliminate
surfaces, so we would have it mark which ones are actually used,
then shrink the binding table accordingly. Unfortunately, it's a
pretty blunt mechanism - it can only prune things from the end,
not the middle - since we decide the layout before we even start
the backend compiler, and only limit the size. It also basically
gives up if it sees indirect array access.
Besides, we do the vast majority of our surface elimination in NIR
anyway, not the backend - and I don't see that trend changing any
time soon. Vulkan abandoned this plan a long time ago, and I don't
use it in Iris, but it's still been kicking around in i965.
I hacked shader-db to print the binding table size in bytes, and
observed no changes with this patch. So, this code appears to do
nothing useful.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
The next patch replaces an unsigned bitfield with a plain unsigned,
which triggers gcc to begin warning on signed/unsigned comparisons.
Keeping this patch separate from the actual move allows bisectablity and
generates no additional warnings temporarily.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are broken on a future platform, but it turns out we don't need
to fix them, since they're just type-converting moves with strided
source. Kill them.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This is a squash of a bunch of individual changes:
nir/builder: Generate 32-bit bool opcodes transparently
nir/algebraic: Remap Boolean opcodes to the 32-bit variant
Use 32-bit opcodes in the NIR producers and optimizations
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Use 32-bit opcodes in the NIR back-ends
Generated with a little hand-editing and the following sed commands:
sed -i 's/nir_op_ball_fequal/nir_op_b32all_fequal/g' **/*.c
sed -i 's/nir_op_bany_fnequal/nir_op_b32any_fnequal/g' **/*.c
sed -i 's/nir_op_ball_iequal/nir_op_b32all_iequal/g' **/*.c
sed -i 's/nir_op_bany_inequal/nir_op_b32any_inequal/g' **/*.c
sed -i 's/nir_op_\([fiu]lt\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ge\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]ne\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fiu]eq\)/nir_op_\132/g' **/*.c
sed -i 's/nir_op_\([fi]\)ne32g/nir_op_\1neg/g' **/*.c
sed -i 's/nir_op_bcsel/nir_op_b32csel/g' **/*.c
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We have to lower some shadow instructions because they don't exist in
hardware and we have to lower txb+offset+clamp because the message gets
too big and we run into the sampler message length limit of 11 regs.
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of a single i2b and b2i, we now have i2b32 and b2iN where N is
one if 8, 16, 32, or 64. This leads to having a few more opcodes but
now everything is consistent and booleans aren't a weird special case
anymore.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
