With this patch, the piglit arb_separate_shader_object-dlist test
passes.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will be used for GL_ARB_separate_shader_objects. That extension
not only allows separable shaders to rendezvous by location, but it also
allows traditionally linked shaders to rendezvous by location. The spec
says:
36. How does the behavior of input/output interface matching differ
between separable programs and non-separable programs?
RESOLVED: The rules for matching individual variables or block
members between stages are identical for separable and
non-separable programs, with one exception -- matching variables
of different type with the same location, as discussed in issue
34, applies only to separable programs.
However, the ability to enforce matching requirements differs
between program types. In non-separable programs, both sides of
an interface are contained in the same linked program. In this
case, if the linker detects a mismatch, it will generate a link
error.
v2: Make sure consumer_inputs_with_locations is initialized when
consumer is NULL. Noticed by Chia-I.
v3: Rebase on removal of ir_variable::user_location.
v4: Replace a (stale) FINISHME with some good explanation comments from
Eric.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
When linking a separable program that contains only a fragment shader,
the producer will be NULL. Similar cases will exist with geometry
shaders and, eventually, tessellation shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
While writing the link_varyings::single_interface_input test, I
discovered that populate_consumer_input_sets assumes that all shader
interface blocks have been lowered to discrete variables. Since there
is a pass that does this, it is a reasonable assumption. It was,
however, non-obvious. Make the code fail when it encounters such a
thing, and add a test to verify that behavior.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Four initial tests:
* Create an IR list with a single input variable and verify that
variable is the only thing in the hash tables.
* Same as the previous test, but use a built-in variable
(gl_ClipDistance) with an explicit location set.
* Create an IR list with a single input variable from an interface block
and verify that variable is the only thing in the hash tables.
* Create an IR list with a single input variable and a single input
variable from an interface block. Verify that each is the only thing
in the proper hash tables.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
I want to make some changes to this code, but first I want to make some
unit tests for it... so that I can capture the pre- and
post-invariants. Pulling the code out into its own function in a
non-anonymous namespace enables that.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This code was broken in some odd ways before. Too much state was being
saved, it was being restored in the wrong order, and in the wrong way.
The biggest problem was that the pipeline object was restored before
restoring the programs attached to the default pipeline.
Fixes a regression in the glean texgen test.
v3: Fairly significant re-write. I think it's much cleaner now, and it
avoids a bug with some meta ops that use shaders (reported by Chia-I).
v4: Check Pipeline.Current against NULL instead of Pipeline.Default.
Suggested by Chia-I.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
Pull most of the guts out of _mesa_BindPipeline into a new utility
function that can be use elsewhere (e.g., meta).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Don't do anything with variables that have explicitly assigned
locations. This is also how built-in varyings are handled.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In February 2013 Paul unified the values used for shader stage outputs
and shader stage inputs. See commits 8a076c5f0^..eed6baf76. Since that
time, the location_base parameters are always VARYING_SLOT_VAR0.
Instead of passing that around, just hard code it.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that we are uisng the OpenCL 1.2 headers, applications expect all
the OpenCL 1.2 functions to be implemented.
This fixes linking errors with the piglit CL tests.
v2:
- Use c++ features
- Fix error code handling
v3:
- Move <iostream> into api/util.hpp
- Fix indentation
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
v2: Use the user provided offset and stride when the buffer ID is zero.
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v2)
Make set_ubo_binding() just update the binding, and move the code
that does validation, flushes the vertices etc. into a new
bind_uniform_buffer() function.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Document the difference between _mesa_lookup_bufferobj() and
_mesa_multi_bind_lookup_bufferobj().
v3: Don't create the buffer objects when they don't exist.
Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v2)
Make set_atomic_buffer_binding() just update the binding, and move
the code that does validation, flushes the vertices etc. into a new
bind_atomic_buffer() function.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is for glBindTextures(), since it doesn't change the active
texture unit.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch adds functions for locking/unlocking the mutex, along with
_mesa_HashLookupLocked() and _mesa_HashInsertLocked()
that do lookups and insertions without locking the mutex.
These functions will be used by the ARB_multi_bind entry points to
avoid locking/unlocking the mutex for each binding point.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The texture can only be bound to the index that corresponds to its
target, so there is no need to loop over all possible indices
for every unit and checking if the texture is bound to it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will be used by glBindTextures() when unbinding textures,
to avoid having to loop over all the targets.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will be used by glBindTextures() so we don't have to look it up
for each texture.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We had the EGLimage structure laying around in intel_regions.h, but now
it's the only thing left in the file.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
v2: Fix bad pointer on unreference (caught by Chad)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
I slipped this in in the region->pitch change from pixels to bytes, but I
don't see any reason for it any more -- the libdrm code doesn't appear to
divide pitch by a cpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
If the stride wasn't width*cpp, we wouldn't track how much of the src is
busy, and allow a subdata into the end to proceed unsynchronized.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Note: region->width/height used to reflect the total_width/height padding
of separate stencil, though mt->total_width didn't. region->width/height
was being used in EGL images, where the padded value would have been the
wrong one, so I converted them to use rb->Width/Height.
v2: Drop debug printf that slipped in (caught by Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Regions aren't refcounted safely for multithreaded applications, and
they're not terribly useful wrappers of a BO, so I'm trying to remove
them.
Even the stride I added here could probably be reduced to use of an
existing field in the __DRIimageRec, but I want this to be as mechanical
of a change as possible.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I want to do this to get the region removed from DRI images. However, it
does mean that we won't share the intel_region between the rb and the
texture for texture_from_pixmap. I think that's fine.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I noticed that we were doing this while changing the DRI3 path to not use
regions, which involved changing the signature of
intel_update_winsys_renderbuffer_miptree() this way.
v2: Replace my comment with Chad's version.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Once a buffer has been named, drm_intel_bo_flink() is just a getter.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The drm function to get the tiling is just a getter storing the two
pointers, so we don't need to go out of our way to avoid it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
All the consumers are doing it on a miptree.
v2: fix a silly duplicated dereference (review by Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v1)
