The global thread storage descriptor can be allocated in the dispatch
path, which means the test on tsd != NULL might be true when the first
RUN_IDVS() happens, and we never set r24 to the TSD address.
Fix that by keeping a tsd field in panvk_cmd_graphics_state that's only
set in the draw path.
Reported-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Tested-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Tested-by: Alexandre ARNOUD <aarnoud@me.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31147>
panfrost_invert_swizzle produces a (one-sided) inverse, that is a
function g such that g(f(x)) = x. However, it is actually used in
some cases where we want a two-sided inverse, where we also have
f(g(x)) = x. An example is its use to pre-swizzle border color
values so that a later pass will un-swizzle them. If the swizzle
is not one-to-one this two sided inverse does not exist. However,
we can do better than the original code, e.g. for an RRR1 swizzle
inverse produced was originally B000, which when applied on the wrong
side results in BBB1 as output, whereas R000 would produce the
desired RRR1 output. Using the first valid component we see, rather
than the last one, is thus usually better.
The "correct" solution is to re-write all the code that uses
an inverse to handle non-unique inverses. But frankly these uses only
crop up in fairly niche cases like tests, and it's probably not worth
spending a lot of effort to deal with these edge cases when this
patch fixes most of them.
Fixes some failing piglit ext_framebuffer_multisample tests.
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31060>
Patch panvk_macros.h to add a case for v10 and accept v10 devices.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
With its sync object primitive, CSF allows native event support.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
With those two components implemented, we can now compile all common
per-arch source files.
Co-developed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Events cross the device boundary and can be read/written by the host.
We could add the necessary cache flush and made those GPU-cached, but
it's way simpler to allocate non-cached memory.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Panthor allows us to control the GPU virtual address space,
which, among other things, will allow us to support sparse
bindings.
Let's tweak the device initialization and BO mapping to
takes this explicit VA management mode into account.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
The JM backend is not ready for v9 yet, so let's just drop it from the
list of architecture to build for.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
When an allocation failure happens, the command buffer should be
flagged as invalid, and anything using this memory from the CPU side should
be skipped to avoid segfaults.
For allocations going through memory pools owned by a command buffer
we automate that with panvk_cmd_alloc_xx() macros.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Turns out the panvk_cmd_buffer structures for CSF/JM are similar enough
to make CmdPushConstants2KHR() generic. Let's move this function out
of the JM specific code.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
We had planned for a CSF specialization, but it turns out the CSF/JM
are almost the same and we can have something generic implemented in
panvk_vX_shader.c
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Turns out the panvk_cmd_buffer for CSF/JM have enough similarities to
make it possible to have a generic implementation in
panvk_vX_cmd_desc_state.c.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
It's needed for wait-before-submit, which drm_syncobjs don't
support.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
The tiler heap is handled differently on CSF hardware, and we don't need
to allocate the tiler_heap buffer there.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
If we don't do that, we might end up with data from the previous user
of this set.
Fixes: 598a8d9d11 ("panvk: Collect allocated push sets at the command level")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
The panvk_device is used in gen-agnostic path, and which means we can't
make its size dependent on PAN_ARCH.
Fixes: 5067921349 ("panvk: Switch to vk_meta")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
While at it, store the index_size in bytes instead of bits.
Suggested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
The descriptor lowering pass can add UBO loads to read descriptors, and
these loads already assume a nir_address_format_32bit_index_offset
format.
Bail out if we detect that case in valhall_pack_buf_idx().
Reported-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Fixes: 27beadcbdb ("panvk: Extend the shader logic to support Valhall")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
We have buffers that are not supposed to be CPU-mapped but are useful to
check when tracing is enabled.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
It's unused and we're not supposed to manually set the dirty bits
anyway.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
We don't need to pass the vertex count around on Bifrost/Valhall, since
the tiler descriptor is generated outside of emit_fbd() on those gens.
Let's move vertex_count under the midgard struct to make that clear.
This implies maintaining a vertex_count at the panfrost_batch level
in the gallium driver, but that's fine.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Valhall has extra tiler parameters for multilayer rendering that we will
need for the framebuffer descriptor emission. Let's add proper struct
for Valhall and Bifrost instead of assuming a mali_ptr is all we'll ever
need.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Looks like some leftovers from a debugging session.
Fixes: 97f6a62f7e ("pan/kmod: Add a backend for panthor")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
If the CS register file is used in a stateful mode, some of the registers
will survive the RUN_xxx boundary, and even serve as a context for
subsequent RUN_xxx calls.
Having a way to restrict register access outside specific sections of
code is a handy debug feature, so let's expose the necessary bits to
allow that.
It takes the form of a reg permission callback that gets called every
time a register serves are a source or destination, to make sure this
is allowed in this context.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
Just to make things consistent with the rest of the file, the compiler
was probably already inlining those anyway.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
With load/store operations being asynchronous, it's pretty easy to omit
a WAIT(LS) and end up with inconsistent register values or corrupted
stores.
Add an optional load/store tracker to detect such cases early on.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
When it comes to copying stuff around, it becomes handy to be able
to have a discontiguous range of register to load to/store from so
we don't have to move stuff around to make things contiguous in the
register file.
Allow that by making register count the last bit in the mask rather
than counting bits.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
We need for the dynamic scoreboard assignment we will do in panvk.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
The register is not used in that case anyway, so we can pick r0 and
call it a day.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
FLUSH_CACHE2 is both deferrable and asynchronous. That means we should
always pass an explicit slot to signal instead of picking zero as we do
in cs_now().
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Reviewed-by: John Anthony <john.anthony@arm.com>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30969>
This was missing and causing dynamic state to remain dirty once set.
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Fixes: 1f57aae4e4 ("panvk: Move vkCmdDraw* functions to their own file")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31089>
Found with a full run, fraction runs seems to not trigger it so far.
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31089>
now that we use vk_meta, we can remove a good chunk there.
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31089>
This fixes "dEQP-VK.api.buffer.invalid_buffer_features.*".
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31089>
This adds support for timestamp in kmod based on new uAPI changes.
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30553>
Panthor support was added in Linux 6.10 and Panfrost V10
in Mesa, enabling new GPUs on Rockchip's RK3588. Add CI
jobs to test Mali V10.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30883>
On bifrost we only can use 3 coordinates for images, but
image2DMSArray needs 4 (x, y, sample#, and array index).
We work around this by making the image nr_samples times
higher than the original image, using the Y coordinate to
address the sample plane. This limits the maximum image
height (to 4K pixels instead of 64K pixels in the 16 sample
case) but at least allows us to use the images.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30521>
On valhall, the sample index should go in the R component
of the image load/store/lea instruction. This provides a
straightforward way to implement image2DMS and
image2DMSArray image load and store for valhall.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30521>
The nir_lower_image_atomics_to_global pass can create some image
load/stores, so we need to do the multisample image load/store
lowering after this.
Also, the pass only actually works on bifrost and below, so skip it
for valhall.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30521>
The pan_arch function is useful elsewhere, and doesn't rely on
anything else within genxml/gen_macros.h.
It's useful, for example, to find the architecture from the
GPU id in bifrost_compile.c, where before we were using ad-hoc
shifting.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30521>
We don't have an RSD descriptor on Valhall, and the vertex
attributes are part of the driver descriptor set, which we
re-emit anyway.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30736>
Quite a few things are common to Valhall/Bifrost. Specialize what's
different, and move the move to the root driver directory.
We don't compile it on v10 as this requires the cmd_buffer bits
that are not yet defined.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Mary Guillemard <mary.guillemard@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/30736>
