Both processors of Mali Utgard are float-only, so bool are not
acceptable data type of them. Fortunately the NIR compiler
infrastructure has a lower pass to lower bool to float.
Call this lower pass to lower bool to float for both GP and PP. This
makes Glamor on Xorg server 1.20.3 at least doesn't hang when starting
gtk3-demo.
The old map of nir op bcsel is changed to fcsel, and the map of b2f32 in
PP is dropped because it's not needed now (it's originally only mapped
to ppir_op_mov).
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
We were pinning it for compute shaders, and pinning it when restoring
saved buffers, but we never actually pinned it in the original batch
for VS/TCS/TES/GS/FS.
Fixes rendering in GFXBench5's Tessellation demo and a bunch of Piglit
geometry shader tests.
We can then reuse those bounds to initialize the VMA heaps at logical
device creation.
This fixes an issue on EHL which has only 36bits of VMA. We were
incorrectly using the fixed 48bits upper bound to initialize the
logical device heap, resulting in addresses beyong the device's
limits.
v2: Don't confuse heap size (limited by system memory) and VMA size
(limited by number of addressing bits the platform has)
v3: Fix low heap vma_size :( (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
Our exec masking introduces lots of redundant flags updates, and even
without that there will be cases where NIR comparisons on the same sources
for different reasons may generate the same comparison instruction before
the selection.
total instructions in shared programs: 6492930 -> 6460934 (-0.49%)
total uniforms in shared programs: 2117460 -> 2115106 (-0.11%)
total spills in shared programs: 4983 -> 4987 (0.08%)
total fills in shared programs: 6408 -> 6416 (0.12%)
This allows using the Marvell Armada display controllers (with the
armada drm modesetting driver) along with the render-only drivers,
such as Etnaviv on an OLPC XO-1.75 laptop.
v2:
- Add to Android.mk too
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Eric Anholt <eric@anholt.net>
As we have already prepared for using util_blitter, use it to implement
lima_blit.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Currently the lima driver saves the framebuffer state in its
from-scratch struct lima_context_framebuffer. However, util_blitter
requires to save framebuffer with standard struct
pipe_framebuffer_state.
Make the lima_context_framebuffer a subtype of the standard
pipe_framebuffer_state, thus the standard part can be used for
util_blitter framebuffer state saving.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
The set_sample_mask function is required in util_blitter.
Add a dummy one to make util_blitter work.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Fixes a couple of Coverity warnings CID 1444626.
Fixes: e30804c602 ("nir/radv: remove restrictions on opt_if_loop_last_continue()")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
In commit 3b3653c4cf we decided not to use bare types; hence do not use
bare type when comparing with interface type to find out if the xfb
variable is an array block.
This fixes dEQP-VK.transform_feedback.* tests.
Fixes: 3b3653c4cf ("nir/spirv: don't use bare types, remove assert in
split vars for testing")
CC: Dave Airlie <airlied@redhat.com>
CC: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
While we're at it, prefix the string with "VIRGL: ", to match similar
code elsewhere in virgl.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
We never want to display a transfer-temp surface, so let's ignore that
flag when calculating the new binding flags.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
The other flags are already vetted, so there's no point in reporting
them.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
We don't usually spell out the int part of unsigned.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
For formats with multiple planes, application will pass a num_planes
sized fds array which should be initialized properly in case fds amount
utilized by the driver is less than the number of planes.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Enable using lima for KMS renderonly. This still needs KMS driver
name mapping to kmsro to be used automatically.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
This helper function can be used by driver which
always need min/max index.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
This is for the case that user only know a max size
it wants to append to the array and enlarge the array
capacity before writing into it.
v2:
- rename newsize to newcap
- rename util_dynarray_enlarge to util_dynarray_grow_cap
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Without that kmscube with GALLIUM_TRACE would segfault like:
#0 0x0000000000000000 in ()
#1 0x0000ffff8f311760 in dri2_create_fence_fd (_ctx=0xaaaae266b8b0, fd=10) at ../src/gallium/state_trackers/dri/dri_helpers.c:122
#2 0x0000ffff90788670 in dri2_create_sync (drv=0xaaaae2667910, disp=0xaaaae26691f0, type=12612, attrib_list=0xaaaae26b9290) at ../src/egl/drivers/dri2/egl_dri2.c:2993
#3 0x0000ffff90776a9c in _eglCreateSync (disp=0xaaaae26691f0, type=12612, attrib_list=0xaaaae26b9290, orig_is_EGLAttrib=0, invalid_type_error=12292) at ../src/egl/main/eglapi.c:1823
#4 0x0000ffff90776be4 in eglCreateSyncKHR (dpy=0xaaaae26691f0, type=12612, int_list=0xfffff662e828) at ../src/egl/main/eglapi.c:1848
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
