Add a new cull_mask system value that is exposed
by the ray_cull_mask capability of
SPV_KHR_ray_cull_mask.
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16430>
This code just got duplicated a lot. There is still more, but the
remaining instances do a bit more than just removing other functions.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16348>
As this function doesn't check for any control-flow
dependence, it only returns true for statically
(or globally) uniform values.
The same holds true for is_binding_dynamically_uniform()
in nir_opt_gcm().
Rename to better reflect that property.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14994>
These are functions that run before the entrypoint at least once per
draw and write their results via store_preamble, and then are loaded in
the rest of the shader via load_preamble.
We will add users in the following commits.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13148>
The workgroup_index is intended for situations when a 3 dimensional
workgroup_id is not available on the HW, but a 1 dimensional index is.
In this case, we can use lower the 3D ID to use this.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15103>
Like txf_ms, these take integers not floats.
Signed-off-by: Georg Lehmann <dadschoorse@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15242>
This is for drivers that have separate store instructions for varyings,
system value outputs (such as clip distances), and transform feedback.
The flags tell the driver not to store the output to those locations.
This will be used by radeonsi initially, and then maybe by a new linker.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
This will allow compaction of transform feedback varyings because they
are no longer tied to varying slots with this information.
It will also make transform feedback info available to all NIR passes
after IO is lowered. It's meant to replace pipe_stream_output_info.
Other intrinsics are not used with transform feedback.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14388>
Task shader outputs work differently than other shaders, so they
need special consideration. Essentially, they have two kinds of
outputs:
1. Number of mesh shader workgroups to launch.
Will be still represented by a shader output.
2. Optional payload of up to (at least) 16K bytes.
These payload variables behave similarly to shared memory, but
the spec doesn't actually define them as shared memory (also, they
may be implemented differently by each backend), so we need to add
a new NIR variable mode for them.
These payload variables can't be represented by shader outputs
because the 16K bytes don't fit the 32x vec4 model that NIR uses
for its output variables.
This patch adds a new NIR variable mode: nir_var_mem_task_payload
and corresponding explicit I/O intrinsics, as well as support for
this new mode in nir_lower_io.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Caio Oliveira <caio.oliveira@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14930>
nir_alu_instr_is_comparison needs to consider all comparison opcodes regardless
of size. Otherwise, they will be missed by nir_opt_move/sink.
Without this change, lowering booleans to integers regresses register
pressure (and spills/fills) significantly in certain shaders on Panfrost,
like android/com.miHoYo.GenshinImpact/1420.shader_test.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15073>
For data-race safety, let's use this function to ensure NIR debug is
initialized only once.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14057>
This envvar is initialized when creating a NIR shader, but it needs to
be used before. So initialize it here.
v2 (Juan):
- Use static variable for first initialization.
Fixes: f77ccdfb4a ("nir: add NIR_DEBUG envvar")
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14057>
Move all the NIR related debug environmental variables in a single
NIR_DEBUG one.
Use NIR_DEBUG=help to print all the available options.
v2:
- Use a macro to simplify (Marcin, Jason)
- Remove wrong changes (Marcin)
v3 (Marcin):
- Remove rendundant NIR mentioning in option descriptions.
- Unwrap option descriptions.
- Ensure the constant is unsigned.
- Use extern array to remove switch.
v4:
- Add missing kernel shader (Jason).
- Add unlikely() (Marcin).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13840>
I aimed for "things that look like big switch statements, or cases where
the compiler is unlikely to be able to constant-propagate an argument into
something useful."
Saves another 80kb on disk. No perf difference on iris shader-db, n=23.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13916>
Deeper in chain of calls, function "src_has_indirect" is used (which
reads "is_ssa" and "reg.indirect").
Fixes: d1eae6f36b ("nir: Properly clean up nir_src/dest indirects")
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13317>
Now that they're no longer ralloc'd, we have to be much more careful
about indirects. We have to make sure every time a source or
destination is overwritten, its indirect (if any) is freed. We also
have to choose a memory ownership convention for the rewrite functions.
Assuming that they will be called with the source from some other
instruction, we choose to always make a copy of the indirect (if any).
It's the responsibility of the caller to ensure its copy of the indirect
is freed.
Unfortunately, all this extra logic is going to make
nir_instr_rewrite/move_src/dest more expensive because they now have
all the logic of nir_src/dest_copy instead of a simple struct
assignment. Fortunately, the vast majority of rewrite calls are done by
nir_ssa_def_rewrite_uses which is an SSA-only fast-path.
Fixes: 879a569884 "nir: Switch from ralloc to malloc for NIR instructions."
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12884>
By replacing the 48-byte ralloc header with our exec_node gc_node (16
bytes), runtime of shader-db on my system across this series drops
-4.21738% +/- 1.47757% (n=5).
Inspired by discussion on #5034.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11776>
Right now we're using ralloc to GC our NIR instructions, but ralloc has
significant overhead for its recursive nature so it would be nice to use a
simpler mechanism for GCing instructions.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11776>
The rules here are the same as for texture instructions. The bits on
the intrinsic are the ground truth and are allowed to vary from the
deref a bit as-needed. If the intrinsic says PIPE_FORMAT_NONE, then we
can look at the variable, if visible, to get format information. This
means that we need to be careful when we rewrite intrinsics based on the
deref to only override the format from the _deref intrinsic from the
image variable unless the intrinsic is PIPE_FORMAT_NONE.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11849>
We say that they're for debug only but we don't really have a good
policy around when to set them and when not to. In particular,
nir_lower_system_values and nir_lower_vars_to_ssa which are the chief
producers of SSA values which might reasonably have a name do not bother
to set one. We have some names set from things like BLORP and RADV's
meta shaders but AFAICT, they're setting a name more because it's there
than because they actually care.
Also, most things other than nir_clone and nir_serialize don't bother to
try and preserve them. You can see in the diffstat of this commit
exactly what passes attempt to preserve names. Notably missing from the
list is opt_algebraic which is the single largest source of SSA def
churn and it happily throws names away.
These observations lead me to question whether or not names are actually
useful at all or if they're just taking up space (8B per instruction)
and wasting CPU cycles (to ralloc_strdup on the off chance we do have
one). I don't think I can think of a single time in recent history
where I've been debugging a shader issue and a SSA value name has been
there and been useful. If anything, the few times they are there, they
just throw me off because they mess up the indentation in nir_print.
iris shader-db on my system gets runtime -2.07734% +/- 1.26933% (n=5)
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5439>
Reduces the work that other shader passes have to do to look at dead code,
and possibly extra rounds around the optimization loop if dce wasn't the
last pass in it.
shader-db runtime -1.12919% +/- 0.264337% (n=49) on SKL.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11628>
Sometimes you might want to find a constant source without going through
all the copy prop and constant folding to make your source be a
load_const.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11613>
