There was only one consumer of this API, meta.c, which was intending
to ask "is this format just stencil index (and nothing else)?".
Instead, if one tried to glDrawPixels of GL_DEPTH_STENCIL-type
formats, it would just try to draw the stencil parts. Nothing good
came of this.
This function looks rather silly at this point, but I'm leaving it in
place to be the obvious parallel API to _mesa_is_depth_format(). Note
that if you want the old behavior, you should use it as
(_mesa_is_stencil_format() || _mesa_is_depthstencil_format()) like is
commonly done for depth-related tests.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Asking for the datatype of MESA_FORMAT_Z32_FLOAT_X24S8 is a bit funny
-- there's a float depth channel, and a stencil channel that doesn't
have a particular GLenum associated with its type, so what's the
correct response?
Because there is no query for stencil, just make this format's
datatype be that of the depth channel. It fixes the depth query (and
thus a failure in piglit gl-3.0-required-sized-formats), and none of
the other consumers of the _mesa_get_format_datatype() API care.
v2: Add a comment for why the DataType is this way for this format.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We were already doing it through the shader (layered underneath
GL_EXT_texture_swizzle) in the shadow compare case. This avoids
having per-format logic for switching out the surface format dependent
on the depth mode.
v2: Also do the swizzling for DEPTH_STENCIL. oops.
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I tripped over this bug in the next commit, relying on our
EXT_texture_swizzle to do some shadow sampler-related swizzling. If a
writemask was masking out a channel of the destination that was a live
channel of the texture swizzle, it would read undefined values.
Fixes piglit ARB_fragment_program_shadow/masked.
Reviewed-by: Ian Romanick <idr@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will make handling new formats (like actually exposing Z32F)
easier and more reliable.
v2: Remove the check for hiz buffer -- the MESA_FORMAT should really
be giving us the value we want even for hiz.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Complicates Gallium3D development and doesn't seem to have active users.
Signed-off-by: Kai Wasserbäch <kai@dev.carbon-project.org>
Signed-off-by: José Fonseca <jfonseca@vmware.com>
For the non-separate-stencil-only case, we've been using a NULL
surface for depth, so we didn't have to care. However, to support
separate stencil with no depthbuffer, we have to make the depth
surface non-NULL or the stencil test always fails thanks to separate
stencil inheriting the surface type of depth.
Fixes hiz-depth-stencil-test-d0-s8.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Page 77 (page 91 of the PDF) says about glGetActiveAttrib:
"The returned attribute name can be the name of a generic
attribute or a conventional attribute (which begin with the prefix
"gl_", see the OpenGL Shading Language specification for a
complete list)."
Page 261 (page 275 of the PDF) says about glGetProgramiv:
"If pname is ACTIVE_ATTRIBUTES, the number of active attributes in
program is returned."
It doesn't say anything about built-in vs. user-defined attributes.
From the language around glGetActiveAttrib and the lack of an
exclusion of built-in attributes, which exists other places (e.g.,
around glBindAttribLocation), we can infer that GL_ACTIVE_ATTRIBUTES
should include the active attribute count. It should also be included
in the values returned by glGetActiveAttrib.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43138
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Yi Sun <yi.sun@intel.com>
To each switch statement in s_texfilter.c, add a break statement to the
default case.
Eliminates the Eclipse static analysis warning: No break at the end of
this case.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Replace the distinct struct gl_client_array members in gl_array_object by
an array of gl_client_arrays indexed by VERT_ATTRIB_*.
Renumber the vertex attributes slightly to keep the old semantics of the
distinct array members. Make use of the upper 32 bits in VERT_BIT_*.
Update all occurances of the distinct struct members with the array
equivalents.
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Make gl_program::InputsRead a 64 bits bitfield.
Adapt the intel and radeon driver to handle a 64 bits
InputsRead value.
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Consolidate the two distinct set of flags to use VERT_BIT_*.
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Introduce a set of defines for VERT_ATTRIB_* and VERT_BIT_*
that will be used in the followup patches.
Signed-off-by: Mathias Froehlich <Mathias.Froehlich@web.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
According opengl spec 4.2.pdf table 6.12 (Vertex Array Object State) at
page 515, the element buffer object is listed in vertex array object.
So, move the ElementArrayBufferObj inside gl_array_object to make
element buffer object per-vao.
This would fix most of(3 left) intel oglc vao test fail
NOTE: this is a candidate for the 7.11 branch.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The position of the red and green bits was misstated in the comments.
Arguably, the names of these formats should be changed to "GR" to reflect
the component ordering and to be consistent with other formats.
As with the other integer-valued formats, use NULL until we support
integer textures.
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=43316
Tested-by: Vinson Lee <vlee@vmware.com>
Signed-off-by: Brian Paul <brianp@vmware.com>
If alpha test is enabled and there's no color buffers we still need the
fragment shader to emit a color.
v2: add _NEW_COLOR flag in _mesa_update_state_locked()
Fixes piglit fbo-alphatest-nocolor-ff failures with Gallium drivers.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net> (i965)
This simplifies a few callers. And it adds a bit of robustness.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The source array elements are 8-bytes (float + uint) so we need
to multiply the src index by 2 to get the right array stride.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This format is used in the ARB_texture_rgb10_a2ui spec.
It adds core mesa support, texformat + texstore support, format_unpack
and fbobject.c (all patches from list merged + fixed up).
also fixes some whitespace issues.
Parts were:
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These codepaths were missing the cases for BGR_INTEGER/BGRA_INTEGER.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
After reading ARB_texture_rgb10_a2ui it appears the packed formats
for integer types are only specified via this extension, and not via
the original ones. So condition the checks on this.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
MESA_FORMAT_RGBX8888_REV is one of the opaque pixel formats used on Android.
Thanks to texture-from-pixmap, drivers may actually see texture images with
this format on Android.
MESA_FORMAT_RGBX8888 is added only for completeness.
Reviewed-by: Brian Paul <brianp@vmware.com>
[olv: Move the new formats after MESA_FORMAT_ARGB8888_REV in gl_format. I
accidentally moved them to the wrong place when preparing the patch.]
GLX functions are sometimes directly available in the current binary. In such
cases, we do not need any alternate library loaded using dlopen. Otherwise,
dlopen may find the wrong libGL library and get functions that conflicts with
the current loaded ones.
For example, on Debian Sid with nvidia binary drivers, using mesa's libEGL with
GLX driver leads to wrong glXGetFBConfigs symbol loaded (or loaded twice?),
which leads to "GLX: failed to create any config" error message as the
glXGetFBConfigs symbol seems to return garbage. If the binary is linked with
nvidia's libGL, the GLX symbols are already available.
Without this patch, convert_fbconfig (src/egl/drivers/glx/egl_glx.c:233) fails
for every config found, after glXGetFBConfigAttrib(... GLX_RENDER_TYPE, ...)
call, as the value returned has GLX_COLOR_INDEX_BIT and not GLX_RGBA_BIT.
[olv: initialize handle, prepend egl_glx to the commit log]
