Drop all -m*, -W*, -O*, -g* and -f* flags, with the exception of
-fno-rtti, which must be used if it's part of the llvm-config --cxxflags
output. We don't want LLVM to dictate the flags we use, and it can even
cause build failures, e.g. if LLVM and Mesa are built with different
compilers.
While we're at it, eat any whitespace preceding dropped flags as well.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 0f53404565)
Nominated-by: Marek Olšák <marek.olsak@amd.com>
Bugzilla: https://bugs.freedesktop.org/100028
Otherwise the configuration fails when building independant libs
like vdpau, vaapi or omx
Fixes: 1ac40173c2 ("configure.ac: simplify EGL requirements for
drivers dependent on EGL")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5398d006de)
[Emil Velikov: resolve trivial conflicts]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Conflicts:
configure.ac
Earlier refactoring commits changed from one, dare I say it, broken
behaviour to another. Namely:
Before, as you explicitly --enable-gallium-llvm your selection was
ignored when llvm-config was not present/detected.
Today, the "auto" heuristics enables gallium llvm regardless if you have
llvm/llvm-config available or not.
Rework the auto-detection to attribute for llvm's presence.
v2: Set enable_gallium_llvm=no when LLVM is not found.
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
Reported-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit d4840c0c26)
Already implicitly handled throughout, but keep it clear and disable
gallium-llvm. This change should be a no-op.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit ce65cc1f1f)
Earlier refactoring commits started setting the above regardless if LLVM
is used or not. Move them to the respective section to restore the
original functionality.
Since we require the preprocessor flags (includes in particular) for the
header version parsing keep those as-is. They are not used outside of
configure.ac thus should not cause any side-effects.
As-is adding the C/CXXFLAGS can lead to build issues on when
cross-compiling.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit 4d8bb9cf8c)
Conflicts:
configure.ac
Make sure that HAVE_LLVM compiler define is only set if LLVM is
actually used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Tobias Droste <tdroste@gmx.de>
v2 [Emil] fold within the existing conditional
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 143c566a81)
Set FOUND_LLVM only when LLVM is present (checking for exact version/etc
is deferred) and use enable-gallium-llvm to indicate the global LLVM
status.
Renaming the latter is not appropriate for stable patches, so we'll
address it with a later commit.
Loosely based on work by Tobias.
v2: Check FOUND_LLVM if enable_gallium_llvm is set.
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit 04377cbdcf)
... to where it's applicable.
Since we effectively made --enable-gallium-llvm mean --enable-llvm with
earlier commits, we need to move the requirement to guard the compnents
added for the LLVM draw.
Otherwise we'll error (as below) when building RADV w/o gallium drivers.
configure: error: --enable-gallium-llvm is required when building radv
v2: Don't remove but move the dependency (Tobias).
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit 5869a7db75)
With this change we effectively require --enable-gallium-llvm when
building RADV. This should be perfectly safe since the gallium radeonsi
driver already explicitly requires it.
The "gallium" part in --enable-gallium-llvm is about to be removed soon
(not in stable), but until then make sure that things can build.
To reflect the requirement (as opposed to check previously) we rename
llvm_check_version_for to llvm_require_version
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit a66ffcd736)
Drop the gallium prefix since we're about it use it throughout the
configure.
Note we do want to check for enable_gallium_llvm check since (as
explicitly requested) the toggle should mean --enable-llvm. Latter of
which to be resolved with later patches.
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit 514a494415)
This is actually not needed because the version is checked later.
Around line 2380
if test "x$enable_gallium_llvm" == "xyes"; then
llvm_check_version_for $LLVM_REQUIRED_GALLIUM "gallium"
llvm_add_default_components "gallium"
fi
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Cc: Tobias Droste <tdroste@gmx.de>
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
v2: [Emil Velikov: rebase/respin series order]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit f64d4d82bd)
With next commits we'll require --enable-gallium-llvm (en route to a
greater good later on) for RADV. The latter is required to ensure that
as otherwise we'll fail to build.
Cc: Dave Airlie <airlied@redhat.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tobias Droste <tdroste@gmx.de>
(cherry picked from commit 38abcdba8a)
Analogous to what we do for the dri and gallium drivers.
Cc: 17.0 13.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@colllabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit cb6be5c8c0)
b3119a3 introduced a strict LLVM requirement for r300 on all
architectures and thus configure fails on architectures where LLVM is
not available or buggy.
r300 doesn't strictly require LLVM, but for performance reasons we
highly recommend LLVM usage. So require it at least on x86 and x86_64
architectures as we have done before b3119a3.
Fixes: b3119a3 ("configure.ac: Check gallium LLVM version in gallium_require_llvm")
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 1f2a890ace)
Otherwise we'll get a lovely message as below:
"require_dri_shared_libs_and_glapi: command not found"
Cc: Steven Newbury <steve@snewbury.org.uk>
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Fixes: da410e6afa "configure: explicitly require shared glapi for
enable-dri"
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Steven Newbury <steve@snewbury.org.uk>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
(cherry picked from commit 5872850b88)
Earlier commit imported a SHA1 implementation and relaxed the SHA1 and
disk cache handling, broking the Windows builds.
Restrict things for now until we get to a proper fix.
Fixes: d1efa09d34 "util: import sha1 implementation from OpenBSD"
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 9f8dc3bf03)
At the moment we support 5+ different implementations each with varying
amount of bugs - from thread safely problems [1], to outright broken
implementation(s) [2]
In order to accommodate these we have 150+ lines of configure script and
extra two configure toggles. Whist an actual implementation being
~200loc and our current compat wrapping ~250.
Let's not forget that different people use different code paths, thus
effectively makes it harder to test and debug since the default
implementation is automatically detected.
To minimise all these lovely experiences, import the "100% Public
Domain" OpenBSD sha1 implementation. Clearly document any changes needed
to get building correctly, since many/most of those can be upstreamed
making future syncs easier.
As an added bonus this will avoid all the 'fun' experiences trying to
integrate it with the Android and SCons builds.
v2: Manually expand __BEGIN_DECLS/__END_DECLS and document (Tapani).
Furthermore it seems that some games (or surrounding runtime) static
link against OpenSSL resulting in conflicts. For more information see
the discussion thread [3]
Bugzilla [1]: https://bugs.freedesktop.org/show_bug.cgi?id=94904
Bugzilla [2]: https://bugs.freedesktop.org/show_bug.cgi?id=97967
[3] https://lists.freedesktop.org/archives/mesa-dev/2017-January/140748.html
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Jonathan Gray <jsg@jsg.id.au>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com> (v1)
Acked-by: Jason Ekstrand <jason@jlekstrand.net> (v1)
Current code warns out in such cases and falls-back to either static or
shared. That can be easily missed amongst the volume produced by our
configure script.
Replace the warning with an error such that one gets direct feedback
when they're doing something wrong.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We've been using and depending on it for at least a couple of years.
Make it obvious and error out, should one opt for it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We have them for local purposes in configure, where we can use their
direct dependency.
With the only remaining instance in the makefile(s) being always true,
as it can be seen in the configure snippet.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Both libraries implicitly require shared GLAPI which in itself mandates
shared libraries.
Stop pretending that one can use it and error out at configure stage.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
We should be using LIBS rather than the LDFLAGS variable. Furthermore
try to keep the linking to the final stage, rather than intermetent
static library.
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We must make sure that xserver has an equivalent one-line
change to its configure.ac as the glx/glapi headers get copied over.
Then again, xserver does _not_ seem to set HAVE_ALIAS to begin with so
one might want to look into that first.
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Currently we have two macros - HAVE_ALIAS and GLX_ALIAS_UNSUPPORTED.
To make it even better former of which is explicitly cleared in some
cases while not in others.
Clear all that up by using a single macro properly set during configure.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
This reverts changes 903eb09b5fb78d47d0f8a4bdf826a113ca2aff40..1a0aa468f354f0ee94dd383cd40ae915584624aa:
Tobias Droste (5):
configure.ac: Rename MESA_LLVM to FOUND_LLVM
configure.ac: Only set LLVM_LIBS if LLVM is used
configure.ac: Only define HAVE_LLVM if LLVM is used
configure.ac: Set and use HAVE_GALLIUM_LLVM define
configure.ac: Don't check LLVM version in gallium_require_llvm
They break scons build, and I'm not convinced this is the right fix. In
particular changing HAVE_LLVM in the C code is something I'd rather
avoid no matter what. So it's better to discuss without the pressure of
broken builds.
When compiling LLVM headers, including llvm-config.h, we need to respect
LLVM_CFLAGS. This is especially crucial if LLVM is located in a
non-standard location and it happens that llvm-config.h includes another
header. In such case the detection would fail due to missing header,
because the path is provided in LLVM_CFLAGS.
Let's add LLVM_CFLAGS to global CFLAGS for the time of detection and then
restore the original flags, as done in other places of the script.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This is actually not needed because the version is checked later.
Line 2609:
if test "x$enable_gallium_llvm" == "xyes"; then
llvm_require_version $LLVM_REQUIRED_GALLIUM "gallium"
llvm_add_default_components "gallium"
HAVE_GALLIUM_LLVM=xyes
DEFINES="${DEFINES} -DHAVE_GALLIUM_LLVM"
fi
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Gallium code used HAVE_LLVM to check if it needs to compile code for
LLVM in header and source files.
With the new logic HAVE_LLVM is always set. Use extra define to figure
out if LLVM is used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Make sure that HAVE_LLVM compiler define is only set if LLVM is
actually used.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
v2 [Emil] fold within the existing conditional
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This renames llvm_check_version_for to llvm_require_version and let it
set a variable to mark that LLVM will be used.
Use this to make a usefull configure output and to only check if the
libs are found in LLVM if it is actually used.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99010
Signed-off-by: Tobias Droste <tdroste@gmx.de>
This renames MESA_LLVM to FOUND_LLVM and updates the config.log report
to say if LLVM is found or not, to make clear that this does not mean
that it is used.
There are no MESA_LLVM users so drop the AC_SUBST.
v2 [Emil]
- Polish test: -a over && test, = over ==, unquiote xyes
- other ?
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
dri3 allows us to send handle of a texture directly to X
so this patch allows a state tracker to directly send its
texture to X to be used as back buffer and avoids extra
copying
v2: use clip width/height to display a portion of the surface
v3: remove redundant variables, fix wrapping, rename variables
handle vaapi path
v3.1: we need clip_width/height for every frame so we don't need
to maintain it for each buffer instead use a global variable
v4: In case of single gpu we can cache the buffers as applications
use constant number of buffer and we can avoid calls to present
extension for every frame
Reviewed and Suggested-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
When EGL is used on some other thread than the thread that drives the
main wl_display queue, the Wayland EGL dri2 implementation is
vulnerable to a race condition related to display round trips and global
object advertisements.
The race that may happen is that after after a proxy is created, but
before the queue is set, events meant to be emitted via the yet to be
set queue may already have been queued on the wrong queue.
In order to make it possible to avoid this race, wayland 1.11
introduced new API that allows creating a proxy wrapper that may be used
as the factory proxy when creating new proxies via Wayland requests. The
queue of a proxy wrapper can be changed without effecting what queue
events emitted by the actual proxy will be queued on, while still
effecting what default queue proxies created from it will have.
By introducing a wl_display proxy wrapper and using this when performing
round trips (via wl_display_sync()) and retrieving the global objects (via
wl_display_get_registry()), the mentioned race condition is avoided.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Daniel Stone <daniels@collabora.com>
Changes from V1 -> V2:
- updated Copyright
- added $(top_srcdir)/src/gallium/winsys to include path (suggested by Emil)
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
This driver supports a wide range of Vivante IP cores like GC880,
GC1000, GC2000 and GC3000.
Changes from V1 -> V2:
- added missing files to actually integrate the driver into build system.
- adapted driver to new renderonly API
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Wladimir J. van der Laan <laanwj@gmail.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Mesa requires ax_pthread_ok = yes, thus we can fold/rewrite the
conditional to follow the more common "if test" pattern.
No functional change intended.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
In the (not too) distant future we'd want to remove this option and
effectively drop the other codepath(s) we have in our dispatch.
Linux distributions have been using --enable-glx-tls for a number of
years. Some/most BSD platforms still don't support this, yet this should
serve as an encouragement to move things forwards.
Note: we had many bug reports were opened due to the wrong default
option. See the list below for details.
v2:
- Correct default option in help string (Andreas)
- Add bugzilla references.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70623
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=72902
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73778
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89043
Cc: Jean-Sébastien Pédron <dumbbell@FreeBSD.org>
Cc: Jonathan Gray <jsg@jsg.id.au>
Cc: mesa-maintainers@lists.freedesktop.org
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com>
This makes sure that we handle LLVM minor version >= 10 correctly.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Major and minor version are included in the header file since LLVM
version 3.1.0. Since the minimal required version is 3.3.0 we can
remove the workaround if no values for major/minor were found in the
header.
Since LLVM 3.6.0 the patch version is inside the header file of LLVM.
Only radeon drivers need the patch version and they depend on
LLVM >= 3.6.0, so this is safe too.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Consolidate the required LLVM versions at the top where the other
versions for dependencies are listed.
v5:
Splitted out separate changes (see patch 19 and 20)
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
LLVM components are only added when LLVM is needed.
This means gallium adds this as soon as "--enable-gallium-llvm"
is "yes" and radv + opencl add it explicitly.
v5:
Removed hunk that disabled LLVM for gallium if it was not found.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves the LLVM check for radv to the corresponding driver section.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This moves llvm_set_environment_variables to its final destination
and moves all the LLVM AC_SUBST() below the function call.
No functional change.
Signed-off-by: Tobias Droste <tdroste@gmx.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>