The litest-selftest has its own main method and compiles litest.c with special
flags. Use that to ifdef out the litest.c main function, and inline the
litest_run/litest_parse_args functions so gcc doesn't complain about unused
functions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
--verbose only works when running a specific test, sometimes we need make
check to be more verbose. Set this by default for make check, the log becomes
a lot more expressive that way
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The check unit test framework isn't particularly suited to having ck_assert*
calls in helper functions. A failed assertion in a helper function or the
litest framework merely gives us a the failed line in litest.c.
which doesn't tell us which test actually failed.
Add a backtracing facility with litest_backtrace(). And since this requires
wrapping all ck_assert macros with litest_assert() this patch ended up
replacing/duplicating a bunch of ck_assert_* bits. So rather than
ck_assert_int_eq() we now use litest_assert_int_eq(), etc. in the litest
framework itself.
The int comparison macros are more type-safe than ck_assert()'s macros which
just cast all the ints to intmax_t.
Backtrace is spewed to stderr, which is good enough for debugging. Example
backtrace:
FAILED COMPARISON: status != expected
Resolved to: 0 != 0
in disable_button_scrolling() (pointer.c:115)
Backtrace:
0: ./test/test-pointer (litest_fail_comparison_int+0xab) [0x40973b]
1: ./test/test-pointer (disable_button_scrolling+0x174) [0x40421b]
2: ./test/test-pointer (middlebutton_middleclick+0x40) [0x40829c]
3: /lib64/libcheck.so.0 (srunner_run+0x7f5) [0x7f0e8a277025]
4: ./test/test-pointer (litest_run+0x107) [0x40a42b]
5: ./test/test-pointer (main+0x2fa) [0x4090e7]
6: /lib64/libc.so.6 (__libc_start_main+0xf0) [0x7f0e88f5e790]
7: ./test/test-pointer (_start+0x29) [0x403ce9]
8: ? (?+0x29) [0x29]
litest_backtrace() itself is copied from xserver/os/backtrace.c which git
blame attributes to Marcin.
CC: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Run the touchpad tests first, it's the most likely to fail. It also takes the
longest, so it's annoying to have it fail when you spent a minute watching the
other tests succeed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
When the device supports true hovering, it reports this
information through ABS_MT_DISTANCE.
When this axis is available, we should rely on it to
(un)hover the touches as BTN_TOUCH is most of the time
unreliable (generated by the mouse emulation in the kernel).
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we have a middle button but no wheels, enable on-button scrolling for the
middle button by default. This applies e.g. to the Logitech trackball added as
new test device here.
This makes the separate check for POINTINGSTICK obsolete but I'd rather leave
this in to be more explicit about it.
https://bugs.freedesktop.org/show_bug.cgi?id=90208
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This is sort-of legitimate, so simply disable the axes and continue.
Any real axis we require to have a real range.
https://bugs.freedesktop.org/show_bug.cgi?id=90090
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This currently requires a specific udev rule to tag the device, once the
matching bits are upstream we can drop this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device has a couple of axes (fake MT) and a wheel. The device itself
exports 4 nodes, this device is the second node, the most problematic one.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Works as a touchpad but has no buttons.
Minor change to one of the touchpad tests: because the touch area is so big
the slow-scrolling trigger needs to be adjusted.
And because the device is an external device, the "disable on external mouse"
test needs to be adjusted.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This patch adds simple script that compares libinput.sym file to the
functions that are marked by LIBINPUT_EXPORT. This script is added
to make check target.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Notable: sends BTN_0/1/2 instead of the trackpoint
This device currently has the INPUT_PROP_TOPBUTTONPAD property set, kernel
patches [1] and [2] are pending to remove this. This test device already lacks
the property.
[1] https://patchwork.kernel.org/patch/5730371/
[2] https://patchwork.kernel.org/patch/5730451/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device sends touch information before BTN_TOUCH
https://bugs.freedesktop.org/show_bug.cgi?id=87197
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Fixes distcheck (automake 1.14.1)
make[2]: Entering directory '....../libinput-0.7.0/_build/test'
Makefile:926: ../src/.deps/libinput-util.Plo: No such file or directory
make[2]: *** No rule to make target '../src/.deps/libinput-util.Plo'. Stop.
make[2]: Leaving directory '....../libinput/libinput-0.7.0/_build/test'
Makefile:412: recipe for target 'distclean-recursive' failed
That was the only place we used subdir objects, so we can drop it from
configure now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Re-uses the touch_down interface for now, but requires the slot is always 0.
That's easier for now than adding a new interface for abs event, at least
until we have more than one device that needs it.
This device, along with a couple of similar ones have a tendency to break in
the X.Org stack without people noticing. They're special in that they have
absolute x/y axes but relative wheels. For libinput that's not as much of a
problem as it is in X but let's add them anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In the device description, define the interfaces for touch down/move even
though we technically don't have those interfaces. Makes it easier to test.
The fake-mt tests make sure the device shows up correctly and that no touch
events are being sent for touch events.
This device is a pointer device too, the pointer tests will test it for
correct functionality of the REL_X/Y bits, no special test needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With a non-zero absmin for both axes and different ranges for x/y, just to
detect those errors.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The goal of -static was to avoid the libtool wrappers for easier debugging.
The -no-install flag does exactly that, without requiring static linking.
Related to https://bugs.freedesktop.org/show_bug.cgi?id=82292
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Provides the bounding box only, with slot 0 always being the upper/left, slot
1 being the lower-right touch. This needs to use the touch_down etc. litest
interfaces, which are now widened to double (leftover from 489630f58) and a
device-specific private pointer in the litest device.
New device feature for litest: LITEST_SEMI_MT
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We're using the same flags for everything anyway, drop the custom flags
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
cc1plus: warning: command line option ‘-Wstrict-prototypes’ is valid for
C/ObjC but not for C++ [enabled by default]
Since gcc also complains about adding -Wno-strict-prototypes we have to handle
the two separately. A side-effect here: now that we promote the GCC_CFLAGS to
AM_CFLAGS, litest.la is built with the correct CFLAGS too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Avoids having to #define any values we're trying to use.
Header file is from Linux 3.15-rc8.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
I'm not sure what exactly is happening here, but while valgrind seems to run
fine in normal mode, the build from make distcheck fails with rather random
errors. Disabling CK_FORK seems to help, but more investigation is needed.
Meanwhile, this makes distcheck succeed again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We depend on device creation on the host system, having the tests run in
parallel runs a risk of random failure.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Looks a bit excessive given how simple the base is but hey, we don't want to
ever break that bit. That'd be embarrassing.
And while we're at it make sure that the 'wrong' event getters return NULL for
each event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Instead of having a test device which only purpose is to test absolute
coordinate transformation, use the litest_create_device_with_overrides()
API to create a specially crafted wacom touch device with high
resolution.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a test case and test device that checks if the scale transform can
handle high resolution devices and output monitor resolutions.
The test case is created in a way that it will fail if the coordinate
transform expression will overflow if only 32 bit integer data
containers are used.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous log handler wasn't actually hooked up to anything. Add a public
API for the log handler with priority filtering, defaulting to priority
'error' and stderr as output stream.
And to keep the diff down and convenience up, provide a few simple wrappers
for logging. The generic is log_msg(), but let's use log_info, log_error, etc.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This means we do have to provide the get_current_screen_dimensions() call in
litest now, just hardcode it to 1024x768.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
