Except for a few axes where this may be correct, a min == max axis range
indicates a broken kernel driver. To avoid potential divisions by zero when
scaling this axis later, reject such a device outright.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit 0e64837f30.
Rather than a customized touchpad property, let udev handle this and set the
absinfo struct during the normal setup procedures. No need for libinput to
have a custom workaround here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make sure that if we go in one direction, then change flip over to the other
direction we actually stop going into that direction, and the delta is lower
than whatever the previous delta was (i.e. acceleration resets).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Not all touchpad kernel drivers supply the x/y resolution. Let the udev hwdb
fix this up where possible and read the value from it.
This is intentionally only used on touchpads, touchscreen devices without
resolution should be considered buggy and fixed in the kernel.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We really don't need to deal with devices that have x but not y or vice versa.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The helper function now prints an error message if the event type passed is
not allowed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The current default start location for the 2fg scroll tests: 47%, 50% and
53%, 50% are further than 3cm apart on the wacom-intuos-finger test device,
causing test failures when pinch gesture support gets added.
This fixes this, and also switches the fingers in the
touchpad_2fg_scroll_slow_distance and touchpad_trackpoint_buttons_2fg_scroll
tests to the default locations rather than putting them pretty far apart.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently all the touchpad 2fg tests move the 2 fingers 1 at a time,
causing a finger motion which looks more like a pinch zoom in followed by
a zoom out than an actual 2fg scroll gesture. Add a helper function which
can move 2 fingers at the same time (more or less), and use this where
relevant.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently touchpad_2fg_scroll_slow_distance always moves the touches 10% of
the touchpad height during the test.
On the wacom-intuos-finger test device this is a much larger distance then on
the synaptics test device, triggering ck_assert(axisval < 5.0) errors with
further patches in this set, this commit fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The previous setting of 10 wasn't 10 mm, it was used against the deltas
normalized to a 1000DPI mouse, i.e. closer to 4mm. It was also also per-event,
so a slow movement or a high-frequency touchpad can struggle to meet the
threshold.
Change the trigger to be ~5 mm from the initial touch down, accumulated until
we either meet the threshold or the timeout expires. The first scroll event
includes the delta since the touch down rather than the most recent delta.
This removes the delay otherwise seen in scrolling and makes the scroll motion
match the finger motion. This accumulated delta only applies when exceeding
the motion threshold, when the timeout triggers the switch to scrolling the
first delta posted is the current delta.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
On a semi-mt device lifting slot 0 before slot 1 makes slots 1 become slot 0
(with the matching coordinate jump), potentially triggering the tap movement
threshold.
On one test we can just swap the release order, the other test we need to
disable (the _inverted version of this test tests the other order anyway).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This affects the touch device on graphics tablets.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Works as a touchpad but has no buttons.
Minor change to one of the touchpad tests: because the touch area is so big
the slow-scrolling trigger needs to be adjusted.
And because the device is an external device, the "disable on external mouse"
test needs to be adjusted.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
These tests make sure we don't get tapping events in certain situations
(finger movement, timeouts, ...). Tapping must be enabled for that to be a
valid test.
The tests can't work on semi-mt devices because we can't end slots
independently. Disable the tests there.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If we send BTN_LEFT or similar, we need the LITEST_BUTTON capability on the
device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Split out into a btntool test and a true three-finger test. For consistency,
check the number of slots on all those tests rather than having
litest-device-specific exclusions.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
No effect, all devices currently have tapping disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The event sequences we use for plam detection trigger tap events if enabled by
default. Always disable tapping, a set of tests for tapping in the palm
exclusion zones. Arguably, tapping in the zones should be handled in a
separate set of tests though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Handle everything which is not handled by the tap, (soft)button or edge-scroll
code/statemachines in a unified way. Everything is treated as a X-finger
gesture now, and the action to take on finger movement is decided by
the gesture.finger_count setting. Pointer control now simply is seen as a
1 finger gesture, and 2fg scrolling as a 2fg gesture.
This removed the need for special-casing things like switching back to
pointer mode when lifting a finger in 2fg scrolling mode, and also lays the
groundwork for adding 3+ fg gesture support.
Note that 1 test-case needs to be updated to wait for the finger mode
switching when switching mode while a gesture has already been started.
This is actually an improvement as this stops sending spurious pointer
motion events at the end of 2fg scrolling when not lifting both fingers at
exactly the same time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
seat_button_count
seat_key_count ... uninitialized variable
t = zalloc
s = zalloc ... dereferencing potential NULL-pointer
d->ntouches_down... side-effect in assertion
Coverity run against the 0.10.0 tag, see
https://scan.coverity.com/projects/4298
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Christian Hartmann <cornogle@googlemail.com>
This patch adds simple script that compares libinput.sym file to the
functions that are marked by LIBINPUT_EXPORT. This script is added
to make check target.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Devices like Wacom tablets have multiple event nodes (touch, pad and stylus).
This requires some logical grouping, e.g. setting an Intuos 5 tablet
left-handed effectively turns it upside down. That then applies to both the
stylus and the touch device.
Merging the devices into one struct libinput_device is not feasable, it
complicates the API for little benefit. A caller would still need access to
all subdevices to get udev handles, etc. Some configuration options apply to
the whole device (left-handed) but some (may) only apply to a single subdevice
(calibration, natural scrolling).
Addressing this would make the libinput API unwieldly and hard to use.
Instead, add a device group concept. Each device is a member of a device
group - a singleton for most devices. Wacom tablets will have a single group
across multiple devices, allowing the caller to associate the devices together
if needed.
The API is intentionally very simple and requires the caller to keep track of
groups and which/how many devices are in it. The caller has more powerful
libraries available to do that than we have.
This patch does not address the actual merging of devices into the same
device group, it simply creates a new group for each new device.
[rebased on top of 0.10]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When using libinput with xf86-input-libinput, the device speed is
represented as a float passed via X properties.
If a buggy client gives a broken value, the conversions that occur
can cause the value of speed to be NaN (not a number), aka infinity.
In C, any comparison with NaN always gives false, whatever the value.
So that test in libinput_device_config_accel_set_speed():
(speed < 1.0 || speed > 1.0)
will necessarily return FALSE, defeating the test of range.
However, since since any comparison with NaN is false, the
opposite assert() in accelerator_set_speed():
(speed >= 1.0 && speed <= 1.0)
will be false as well, thus triggering the abort() and the crash of
the entire X server along with it.
The solution is to use the same construct in both routines, so that
it fails gracefully in libinput_device_config_accel_set_speed().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Makes the code use more commonly used paths, no real functional changes at
this point. This was using hand-crafted devices as it predates the
litest_add_for_device() helper.
For an upcoming patch to use the udev ID_INPUT_. tags the
event_conversion_key test requires this change: without it the device will be
tagged with ID_INPUT_KEY but not ID_INPUT_KEYBOARD. This could be fixed by
adding all normal keyboard keys to the uinput device but it's easier to just
re-use litest.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Note: touchpads have a different backend, we never get here in that case. This
only applies to true absolute pointer devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Don't rely on a magic version tag, instead let a device define a udev rule and
drop that into the udev runtime directory before the device is created.
There are a couple of caveats with this approach: first, since this changes
system-wide state it may cause issues on the device the test suite is run on.
This can be avoided if the udev rules have filter patterns that ensure only
test devices are affected.
Second, the check test suite aborts but it doesn't run the teardown() function
if a test fails. So far this wasn't a problem since uinput devices disappear
whenever we exit. The rules files will hang around though, so an unchecked
fixture was added to delete all litest-foo.rules files before and after a test
case starts. Unchecked fixtures are run regardless of the exit status of the
test but run in the same address space - i.e. no ck_assert() usage.
Also unchecked fixtures are only run once per test-case, not once per test
function. For us, that means they're only run once per device (we use the
devices as test case), i.e. if a test fails and the udev rule isn't tidied up,
the next test may be unpredictable. This shouldn't matter too much though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Notable: sends BTN_0/1/2 instead of the trackpoint
This device currently has the INPUT_PROP_TOPBUTTONPAD property set, kernel
patches [1] and [2] are pending to remove this. This test device already lacks
the property.
[1] https://patchwork.kernel.org/patch/5730371/
[2] https://patchwork.kernel.org/patch/5730451/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Release one touch point at the same time as a fake touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device sends touch information before BTN_TOUCH
https://bugs.freedesktop.org/show_bug.cgi?id=87197
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
An upcoming synaptics semi-mt device needs the same code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some devices require more than just flipping around the buttons, such as
tablets.
When it comes to devices like tablets, because the position of the palm rest is
on the right, the entire tablet has to be flipped around in order to be usable
by lefties. As such, this requires that we reverse the coordinates of the
tablets in addition to flipping the buttons on the tablet. As such, renaming
these functions so that they aren't specific to devices where only the buttons
are flipped seems appropriate.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is merged on top of the wheel normalization patches. Those introduced an
axis source and an extra "discrete" value to the various internal and external
APIs. This branch changed from a single value to passing dx/dy into all scroll
events.
The conflicts are to change everything to take x, y, x_discrete, y_discrete as
values (and the source axis mask of course).
Conflicts:
src/evdev-mt-touchpad-edge-scroll.c
src/evdev.c
src/libinput-private.h
src/libinput.c
The recent normalization of wheel events means we get the angle in degrees but
we don't know how this corresponds to clicks. The M325 has a 20 degree click
angle, most other mice have 15 degrees. So an angle of 60 can be 3 or 4 click
events.
Most clients care more about the click count than the angle on a mouse wheel.
Provide that value when needed.
Adding a discrete value to the axis event leaves the possibility of defining
discrete units for finger/continuous scroll sources in the future. Right now,
these will always reuturn 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Sending separate axis events instead of one unified events is limiting,
especially when simultaneously scrolling in both directions and the caller
tries to implement kinetic scrolling.
Take a page from the tablet-support branch and instead implement the axis
event as a generic event that can contain multiple axes simultaneously.
Right now we only have two (scroll) axes and we could easily just check both
for non-zero values. If we want to allow further axes in the future, we need
a check whether an axis is set in an event, that's what
libinput_event_pointer_has_axis to scroll events() is for.
We also need the mask to notify of a scroll stop event, which could otherwise
be confused as a vertical-only or horizontal-only event.
This is an API and ABI break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Similar to the mouse resolution, let's make the scroll distance a sensible
predictable value. Most mice use a 15 degree angle per scroll click, so let's
change to that. This will alter behaviour in clients that expect 10.
We return doubles for the axis value, so that leaves the option of
really fine-grained step sizes in the future.
We currently assume all mice have 15 degree angles. Like the DPI settings, it
will require a udev property to be set. Patch for that to follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Main has unused parameters argc and argv. Since they are unused and
C 99 allows to prototype main as 'int main(void)',
remove them and replace by void. It fixes build when unused parameters
are treated as errors.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
