The little wheel isn't a full wheel, it has a ~90 degree rotation angle with a
range of 1024 values. To avoid confusion with "wheel" elsewhere in the API
name it slider.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Needs to be calculated from the x/y tilt values, the mouse has a fixed offset
of 175 degrees counterclockwise.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
A tablet hotplug event is rare and not a time-critical event, so we load the
database on tablet init and throw it away again.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Does what it says on the box. or at least in the manual inside the box.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
args needs to be within () to ensure correct calculation
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
The serial test was broken, it succeeded even if we never got an event. The
second test was fine, but complicated. Make it use some of the newer litest
features.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Reviewed-by: Stephen Chandler Paul <thatslyude@gmail.com>
Handle everything which is not handled by the tap, (soft)button or edge-scroll
code/statemachines in a unified way. Everything is treated as a X-finger
gesture now, and the action to take on finger movement is decided by
the gesture.finger_count setting. Pointer control now simply is seen as a
1 finger gesture, and 2fg scrolling as a 2fg gesture.
This removed the need for special-casing things like switching back to
pointer mode when lifting a finger in 2fg scrolling mode, and also lays the
groundwork for adding 3+ fg gesture support.
Note that 1 test-case needs to be updated to wait for the finger mode
switching when switching mode while a gesture has already been started.
This is actually an improvement as this stops sending spurious pointer
motion events at the end of 2fg scrolling when not lifting both fingers at
exactly the same time.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
seat_button_count
seat_key_count ... uninitialized variable
t = zalloc
s = zalloc ... dereferencing potential NULL-pointer
d->ntouches_down... side-effect in assertion
Coverity run against the 0.10.0 tag, see
https://scan.coverity.com/projects/4298
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Christian Hartmann <cornogle@googlemail.com>
mea culpa, I merged a patch that wasn't ready yet (despite me saying I
wouldn't merge it). Updated patch coming up next commit.
This reverts commit 6e7beeb347.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Having a motion event that's sent right after the original proximity event just
to give the values of each axis is somewhat redundant. Since we already include
the values of each axis with each type of event, we may as well use the
proximity event to give the client the starting values for each axis on the
tablet.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There isn't much purpose in having proximity in and out as different events,
combining them into one single event is more consistent with the rest of the
API, and means less code for clients to have to work with.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On the majority of Wacom tablets, the buttons are on the left side, opposite of
the side where the palm is meant to rest. Because of this, it's impossible to
use the tablet with your left hand (comfortably, anyway) unless you flip it
over, in which case the coordinates need to be inverted for it to match up with
the screen properly. This is where left handed mode comes in. When enabled, it
reverses all the coordinates so that the tablet may be rotated, and the palm
rest on the tablet moved over to the left side.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch adds simple script that compares libinput.sym file to the
functions that are marked by LIBINPUT_EXPORT. This script is added
to make check target.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Added: udev-tag detection for the tablet.
libwacom assigns ID_INPUT_TABLET to all known devices but also
ID_INPUT_TOUCHPAD to all known devices with a touch interface. That's a bug
and should be fixed there but we can work around it by checking both and
making sure only one is set.
Conflicts:
src/evdev.c
test/misc.c
Flow is so this cannot be unset, we'd abort if we never get an event. The
compiler doesn't know that though.
In file included from tablet.c:35:0:
tablet.c: In function ‘motion’:
litest.h:202:45: warning: ‘last_reported_y’ may be used uninitialized in this
function [-Wmaybe-uninitialized]
ck_assert_int_lt((int)(a_ * 256), (int)(b_ * 256))
^
tablet.c:158:26: note: ‘last_reported_y’ was declared here
double last_reported_x, last_reported_y;
^
In file included from tablet.c:35:0:
litest.h:208:45: warning: ‘last_reported_x’ may be used uninitialized in this
function [-Wmaybe-uninitialized]
ck_assert_int_gt((int)(a_ * 256), (int)(b_ * 256))
^
tablet.c:158:9: note: ‘last_reported_x’ was declared here
double last_reported_x, last_reported_y;
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Ignore anything before the TABLET_AXIS event but make sure we get at least one
axis event after the proximity event.
After that, in the second loop change to use tablet_motion, it's confusing to
use tablet_proximity_in here (though it technically works since we never go
out of prox).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Devices like Wacom tablets have multiple event nodes (touch, pad and stylus).
This requires some logical grouping, e.g. setting an Intuos 5 tablet
left-handed effectively turns it upside down. That then applies to both the
stylus and the touch device.
Merging the devices into one struct libinput_device is not feasable, it
complicates the API for little benefit. A caller would still need access to
all subdevices to get udev handles, etc. Some configuration options apply to
the whole device (left-handed) but some (may) only apply to a single subdevice
(calibration, natural scrolling).
Addressing this would make the libinput API unwieldly and hard to use.
Instead, add a device group concept. Each device is a member of a device
group - a singleton for most devices. Wacom tablets will have a single group
across multiple devices, allowing the caller to associate the devices together
if needed.
The API is intentionally very simple and requires the caller to keep track of
groups and which/how many devices are in it. The caller has more powerful
libraries available to do that than we have.
This patch does not address the actual merging of devices into the same
device group, it simply creates a new group for each new device.
[rebased on top of 0.10]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When using libinput with xf86-input-libinput, the device speed is
represented as a float passed via X properties.
If a buggy client gives a broken value, the conversions that occur
can cause the value of speed to be NaN (not a number), aka infinity.
In C, any comparison with NaN always gives false, whatever the value.
So that test in libinput_device_config_accel_set_speed():
(speed < 1.0 || speed > 1.0)
will necessarily return FALSE, defeating the test of range.
However, since since any comparison with NaN is false, the
opposite assert() in accelerator_set_speed():
(speed >= 1.0 && speed <= 1.0)
will be false as well, thus triggering the abort() and the crash of
the entire X server along with it.
The solution is to use the same construct in both routines, so that
it fails gracefully in libinput_device_config_accel_set_speed().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Makes the code use more commonly used paths, no real functional changes at
this point. This was using hand-crafted devices as it predates the
litest_add_for_device() helper.
For an upcoming patch to use the udev ID_INPUT_. tags the
event_conversion_key test requires this change: without it the device will be
tagged with ID_INPUT_KEY but not ID_INPUT_KEYBOARD. This could be fixed by
adding all normal keyboard keys to the uinput device but it's easier to just
re-use litest.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Note: touchpads have a different backend, we never get here in that case. This
only applies to true absolute pointer devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Don't rely on a magic version tag, instead let a device define a udev rule and
drop that into the udev runtime directory before the device is created.
There are a couple of caveats with this approach: first, since this changes
system-wide state it may cause issues on the device the test suite is run on.
This can be avoided if the udev rules have filter patterns that ensure only
test devices are affected.
Second, the check test suite aborts but it doesn't run the teardown() function
if a test fails. So far this wasn't a problem since uinput devices disappear
whenever we exit. The rules files will hang around though, so an unchecked
fixture was added to delete all litest-foo.rules files before and after a test
case starts. Unchecked fixtures are run regardless of the exit status of the
test but run in the same address space - i.e. no ck_assert() usage.
Also unchecked fixtures are only run once per test-case, not once per test
function. For us, that means they're only run once per device (we use the
devices as test case), i.e. if a test fails and the udev rule isn't tidied up,
the next test may be unpredictable. This shouldn't matter too much though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Notable: sends BTN_0/1/2 instead of the trackpoint
This device currently has the INPUT_PROP_TOPBUTTONPAD property set, kernel
patches [1] and [2] are pending to remove this. This test device already lacks
the property.
[1] https://patchwork.kernel.org/patch/5730371/
[2] https://patchwork.kernel.org/patch/5730451/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Release one touch point at the same time as a fake touch.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device sends touch information before BTN_TOUCH
https://bugs.freedesktop.org/show_bug.cgi?id=87197
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
An upcoming synaptics semi-mt device needs the same code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
