The helper function now prints an error message if the event type passed is
not allowed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
And merge all current API versions into the same block. This isn't technically
necessary since removing libinput_has_button from the code will remove it from
the exported list. That trips up test/symbols-leak-test though.
Since we break the API and bump the soname in this release anyway, move
to a single block so the initial stable API is all nicely grouped together.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Store it as identifier in the device group, any two devices that have a
the same non-NULL identifier share the group.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a device has multiple capabilities, has_button is imprecise. A device with
tablet and pointer capability for example may have BTN_LEFT on the pointer
interface but not on the tablet interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Devices like Wacom tablets have multiple event nodes (touch, pad and stylus).
This requires some logical grouping, e.g. setting an Intuos 5 tablet
left-handed effectively turns it upside down. That then applies to both the
stylus and the touch device.
Merging the devices into one struct libinput_device is not feasable, it
complicates the API for little benefit. A caller would still need access to
all subdevices to get udev handles, etc. Some configuration options apply to
the whole device (left-handed) but some (may) only apply to a single subdevice
(calibration, natural scrolling).
Addressing this would make the libinput API unwieldly and hard to use.
Instead, add a device group concept. Each device is a member of a device
group - a singleton for most devices. Wacom tablets will have a single group
across multiple devices, allowing the caller to associate the devices together
if needed.
The API is intentionally very simple and requires the caller to keep track of
groups and which/how many devices are in it. The caller has more powerful
libraries available to do that than we have.
This patch does not address the actual merging of devices into the same
device group, it simply creates a new group for each new device.
[rebased on top of 0.10]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When using libinput with xf86-input-libinput, the device speed is
represented as a float passed via X properties.
If a buggy client gives a broken value, the conversions that occur
can cause the value of speed to be NaN (not a number), aka infinity.
In C, any comparison with NaN always gives false, whatever the value.
So that test in libinput_device_config_accel_set_speed():
(speed < 1.0 || speed > 1.0)
will necessarily return FALSE, defeating the test of range.
However, since since any comparison with NaN is false, the
opposite assert() in accelerator_set_speed():
(speed >= 1.0 && speed <= 1.0)
will be false as well, thus triggering the abort() and the crash of
the entire X server along with it.
The solution is to use the same construct in both routines, so that
it fails gracefully in libinput_device_config_accel_set_speed().
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two methods are provided:
* button area - used on most clickpads, a click with a touch within a given
area generates left/middle/right clicks
* clickfinger - used on apple touchpads, a click with 1/2/3 fingers on the
touchpad generates a left, right, middle click
Both methods already exist in the touchpad code, this is just the
configuration interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some devices require more than just flipping around the buttons, such as
tablets.
When it comes to devices like tablets, because the position of the palm rest is
on the right, the entire tablet has to be flipped around in order to be usable
by lefties. As such, this requires that we reverse the coordinates of the
tablets in addition to flipping the buttons on the tablet. As such, renaming
these functions so that they aren't specific to devices where only the buttons
are flipped seems appropriate.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is merged on top of the wheel normalization patches. Those introduced an
axis source and an extra "discrete" value to the various internal and external
APIs. This branch changed from a single value to passing dx/dy into all scroll
events.
The conflicts are to change everything to take x, y, x_discrete, y_discrete as
values (and the source axis mask of course).
Conflicts:
src/evdev-mt-touchpad-edge-scroll.c
src/evdev.c
src/libinput-private.h
src/libinput.c
The recent normalization of wheel events means we get the angle in degrees but
we don't know how this corresponds to clicks. The M325 has a 20 degree click
angle, most other mice have 15 degrees. So an angle of 60 can be 3 or 4 click
events.
Most clients care more about the click count than the angle on a mouse wheel.
Provide that value when needed.
Adding a discrete value to the axis event leaves the possibility of defining
discrete units for finger/continuous scroll sources in the future. Right now,
these will always reuturn 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Sending separate axis events instead of one unified events is limiting,
especially when simultaneously scrolling in both directions and the caller
tries to implement kinetic scrolling.
Take a page from the tablet-support branch and instead implement the axis
event as a generic event that can contain multiple axes simultaneously.
Right now we only have two (scroll) axes and we could easily just check both
for non-zero values. If we want to allow further axes in the future, we need
a check whether an axis is set in an event, that's what
libinput_event_pointer_has_axis to scroll events() is for.
We also need the mask to notify of a scroll stop event, which could otherwise
be confused as a vertical-only or horizontal-only event.
This is an API and ABI break.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For a caller to implement/provide kinetic scrolling ("inertial scrolling",
"fling scrolling"), it needs to know how the scrolling motion was implemented,
and what to expect in the future. Add this information to the pointer axis
event.
The three scroll sources we have are:
* wheels: scrolling is in discreet steps, you don't know when it ends, the
wheel will just stop sending events
* fingers: scrolling is continuous coordinate space, we know when it stops and
we can tell the caller
* continuous: scrolling is in continuous coordinate space but we may or may not
know when it stops. if scroll lock is used, the device may never technically
get out of scroll mode even if it doesn't send events at any given moment
Use case: trackpoint/trackball scroll emulation on button press
The stop event is now codified in the API documentation, so callers can use
that for kinetic scrolling. libinput does not implement kinetic scrolling
itself.
Not covered by this patch:
* The wheel event is currently defined as "typical mouse wheel step", this is
different to Qt where the step value is 1/8 of a degree. Some better
definition here may help.
* It is unclear how an absolute device would map into relative motion if the
device itself is not controlling absolute motion.
* For diagonal scrolling, the vertical/horizontal terminator events would come
in separately. The caller would have to deal with that somehow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Original patch, before the rebase onto today's master:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Previously, the pointer could only be passed into the context on creation
time and was immutable after that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For certain applications (such as FPS games) it is necessary to use
unaccelerated motion events (the motion vector that is passed to the
acceleration filter) to get a more natural feeling. Supply this
information by passing both accelerated and unaccelerated motion
vectors to the existing motion event.
Note that the unaccelerated motion event is not equivalent to 'raw'
events as read from devices.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Always check for invalid input first, then check if the input is supported by
the actual device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allow retrieval of the libinput context from the seat and the device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The libinput device abstracts a number of things but sometimes the underlying
device is important. The udev device provides the necessary handle to access
that underlying device and various sysfs properties that may be necessary.
A function returning the device node would've done the same thing but is more
prone to race conditions than the udev_device.
https://bugs.freedesktop.org/show_bug.cgi?id=85573
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The seat of a device is currently immutable, but a device may (in a
multi-pointer case) move between different logical seats. Moving it between
seats is akin to removing it and re-plugging it, so let's do exactly that.
The physical seat name stays immutable.
Pro:
- device handling after changing a seat remains identical as handling any
other device.
Con:
- tracking a device across seat changes is difficult
- this is not an atomic operation, if re-adding the device fails it stays
removed from the original seat and is now dead
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This effectively disables the button scrolling, but since 0 is the default
button for most devices, we should allow setting the default button.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a configuration option to allow selecting between 2-finger / edge / none
scrolling (for touchpads).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In some cases the compositor will want to know which buttons a device has.
E.g. for scrolling we want the compositor to be able to set a button to change
a relative device (e.g. a trackball) into scroll mode, so that it sends
scroll-axis events instead of pointer motion events.
In order for the compositor to be able to present a sane UI for this, it needs
to know which buttons a device has.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In the future, we should allow multiple sendevent modes set simultanously.
Change the API to use a bitmask instead of a single return value.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For features like e.g. disable-touchpad-while-typing, it is necessary for one
device to be able to listen into another device's events.
It is tempting to use the existing device_added / device_removed mechanism
to give e.g. the keyboard a link to the touchpad, and make the keyboard code
disable / re-enable the touchpad but this is wrong. This needs to be a setting
of the touchpad, and the policy for things like which events to count as
activity, and what sort of timeout to use to consider the device idle, belongs
in the touchpad code not in the keyboard code.
Add an event listeners mechanism so that the touchpad can listen for (e.g.)
keyboard events, and respond to these itself.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is a preparation patch for adding internal event listeners, so that the
callbacks for these can get the full 64 bit timestamps.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The libinput evdev code uses 64 bit timestamps internally, to avoid having to
deal with timestamp wraps. The internal foo_notify_bar functions time argument
however is only 32 bits, bump this to 64 bits to avoid truncating the timestamps
when calling these functions.
This is a preparation patch for adding internal event listeners, so that the
callbacks for these can get the full 64 bit timestamps.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Natural scrolling is simply inverted scrolling, but I decided to
use the Apple terminology simply because it's easier to google for.
Add the usual quartett of config options for has/set/get/get_default/, as a
boolean option rather than an enum for scroll mode to avoid name collusion
with the (currently in the works) edge scrolling.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Only exposes one knob - speed, normalized to a [-1, 1] range with 0 being the
neutral "this is what we think is normal" speed. -1 and 1 reflect the
slowest/fastest reasonable speed on this device.
Note: with this API we commit to having any pointer accelerating as a true
gliding scale. We cannot map the [-1,1] range into a discrete set of steps
as we do not communicate to the caller whether a specific value has changed
the acceleration. Without that, a caller may assume that acceleration has
changed even when it is not visible to the user.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than adding a config interface to disable a device merely allow a
caller to toggle the "send events" mode on the device. If off, the device
won't send events (though further events may be received depending on the
current state of the device).
Default is enabled, i.e. the device sends events.
A special mode is added to the obvious enable/disable: disable the device when
an external mouse is connected. Once set, the device will be enabled when no
mouse is present and stop sending events otherwise. This isn't hooked up to
anything yet though.
Built into the config API is the default option of "enabled". Any device
supports this, for the obvious reason. Disabling or conditionally disabling is
left to the implementation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
New configuration API:
libinput_device_config_calibration_has_matrix()
libinput_device_config_calibration_set_matrix()
libinput_device_config_calibration_get_matrix()
libinput_device_config_calibration_get_default_matrix()
Deprecates libinput_device_calibrate().
For coordinate transformation, we're using a precalculated matrix. Thus, to
support ..._get_matrix() we need to store the original user-specified matrix
separately, in an unmangled state.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Let the caller decide what to do with the fd.
In the current code the caller can't know if the fd was closed on error since
we return NULL on malloc failure as well as on epoll_ctl() failure. In the
latter case the fd was closed, not in the former. The caller had to close
the fd anyway (and all three callers do), so drop closing the fd from this
function.
Found by Coverity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
More expressive in the caller and less ambiguous about return values (is it 1?
is it non-zero? can it be negative?)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Provide an interface to enable/disable tapping, with a default mapping of
1/2/3 fingers mapping to L/R/M button events, respectively.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Those three are the ones that matter for logging or device identification in
callers, so let's provide them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
