This has never been supported through the stack. No device ever had the
required MOUSE_WHEEL_TILT_VERTICAL/HORIZONTAL udev property set, so
libinput never set the right axis source. Neither weston nor mutter
added the code for it. Even if we added wheel tilt for devices now, it
would break those devices. And the benefit we get from having those
separate is miniscule at best.
So let's do the long-term thing and just deprecate this axis source.
The wheel tilt mouse test device remains in the test suite, with the
udev properties set just to verify that we do indeed ignore those now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Take a snapshot of the time every 10 libinput_dispatch() calls. During event
processing, check if the event timestamp is more than 10ms in the past and
warn if it is. This should provide a warning to users when the compositor is
too slow to processes events but events aren't coming in fast enough to
trigger SYN_DROPPED.
Because we check the device event time against the dispatch time we may get
warnings for multiple devices on delayed processing. This is intended, it's
good to know which devices were affected.
In the test suite we need to ignore the warning though, since we compose the
events in very specific ways it's common to exceed that threshold
(particularly when calling litest_touch_move_to).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No point in printing an interval of e.g. 2h as milliseconds, let's convert
this to something human-readable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We're getting too many regressions on other devices for this feature and only
ALPS touchpads need it (it's a kernel driver bug). So let's limit this to
those devices only.
For example, synaptics serial touchpads don't keep the fake fingers and slot
states in sync when going from two to three fingers, causing an erroneous slot
downgrade. See
https://gitlab.freedesktop.org/libinput/libinput/issues/434#note_419912
That interferes with this code but fixing it is hard and anyway,
synaptics touchpads don't need the slot count drop.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Wacom Cintiq 24HD and later tablets send specific key events for
hardware/soft buttons. KEY_PROG1..KEY_PROG3 on earlier tablets,
KEY_CONTROLPANEL, KEY_ONSCREEN_DISPLAY, and KEY_BUTTONCONFIG on later tablets.
We ignore KEY_PROG1-3 because starting with kernel 5.4 older tablets will too
use the better-named #defines.
These differ from pad buttons as the key code in itself carries semantic
information, so we should pass them on as-is instead of mapping them to
meaningless 0-indexed buttons like we do on the other buttons.
So let's add a new event, LIBINPUT_EVENT_TABLET_PAD_KEY and the associated
functions to handle that case.
Pad keys have a fixed hw-defined semantic meaning and are thus not part of
a tablet mode group.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Scroll button locking is an accessibility feature. When enabled, the scroll
button does not need to be held down, the first click holds it logically down,
to be released on the second click of that same button.
This is implemented as simple event filter, so we still get the same behavior
from the emulated logical button, i.e. a physical double click results in a
single logical click of that button provided no scrolling was triggered.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Logitech MX Master 2S and 3 by default use natural scrolling
for the horizontal scroll wheel, while the main wheel
uses traditional mode. This change inverts the default
direction of horizontal scrolling.
This device looks similar to a MT device on the kernel side, but it's not a
MT device and it's not quite a tablet either. It uses slots to track up to 4
totems off the same device and the only hint that it's not a MT device is that
it sends ABS_MT_TOOL_TYPE / MT_TOOL_DIAL.
udev thinks it's a touchscreen and a tablet but we currently init those
devices as touchscreen (because all wacom tablet touch devices are udev
tablets+tochscreens). So we need a quirk to hook onto this device.
And we use a completely separate dispatch implementation, because adding the
behavior to the tablet interface requires so many exceptions that it's easier
to just add a separate dispatch interface.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Follow-up to 6229df184e
We must not rely on the caller to toggle the left-handed bits correctly since
they may not know which devices belong together (despite device groups). Let's
do the right thing here, if the touchpad is set to left-handed, rotate the
tablet accordingly.
Note that the left-handed setting of the touchpad is left as-is
(right-handed). Until we have notifications about configuration changes, this
is the best we can do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to specify the location that needs to be arbitrated, rather
than just disabling the whole device altogether. This patch just adds the
hooks, no implementation.
This is internal API only, one backend can specify an area in mm which gets
converted to device coordinates in the target device and arbitrated there.
Right now, everything simply passes NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to change the types of touch arbitration, with the focus on
allowing location-based touch arbitration as well as the more generic "disable
everything".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Anything that merely requires a once-off check during initialization can just
use the quirks directly, no need to copy them over to the model flags.
Fixes#146
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This function expected distances per-frame, not per-time which gives us
different behaviors depending on the hardware scanout rate. Fix this by
normalizing to a 12ms frame rate which reflects the touchpad I measured all
the existing thresholds on.
This is a bit of a problem for the test suite which doesn't use proper
intervals and the change to do so is rather invasive. So for now we set the
interval for test devices to whatever the time delta is so we can test the
jumps without having to worry about intervals.
Fixes#121
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
libinput applies averaging to the velocity of most pointer devices. Averaging
the velocity makes the motion look smooth and may be of benefit to bad input
devices. For good devices, however, it comes at the unfortunate price of
decreased accuaracy.
This change turns velocity averaging off by default (sets ntrackers to 2 instead
of 16) and allows for it to be turned back on via a quirk, for bad devices which
require it.
Measuring the trackpoint range has not shown to be sufficient or precise
enough to be used as an ingredient for trackpoint acceleration. So let's just
switch back to a generic multiplier that we can apply to the input deltas do
undo any device-specific lack of scaling.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes the artificial 3 keyboard limit. If you have more internal
keyboards than that, something is wrong in your setup but that shouldn't stop
us from working. Or more specificially: this can happen easily when running
tests so let's not fail the test suite because we created a few hundred
keyboards.
We'll still throw out a log message though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And rename the model flag, no point in having separate flags here, we likely
have to add more devices over time.
https://bugs.freedesktop.org/show_bug.cgi?id=106534
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This makes it possible for callers to detect whether a touch device is
single or multitouch (or even check for things like dual-touch vs real
multi-touch) and adjust the interface accordingly.
Note that this is for touch devices only, not touchpads that are just pointer
devices.
https://bugs.freedesktop.org/show_bug.cgi?id=104867
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Two fingers on the touchpad, they're 40x40mm apart, that's a pinch. But only
after a timeout because we don't want to start a 2fg gesture if the user puts
down the third/fourth finger within the next few ms.
Related to: https://bugs.freedesktop.org/show_bug.cgi?id=99830
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of a scroll wheel these mice feature trackpoint-like sticks which
generate a huge amount of scroll events that need to be handled differently
than scroll wheel events.
Signed-off-by: Peter Ganzhorn <peter.ganzhorn@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This device randomly decides that a touch is now a palm, based on
the moon phase, the user's starsign and possibly what the dog had for
breakfast. Since libinput assumes that a touchpad that labels a touch as palm
has reasons to do so, let's unassume this for this device by disabling that
axis altogether and relying on the touch pressure only.
https://bugzilla.redhat.com/show_bug.cgi?id=1565692
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
When the X1 Yoga is in tablet mode, one capacitative touch button (windows
key, sends KEY_LEFTMETA) and two side volume buttons are accessible on the
front. The key event comes through the internal keyboard that we disabled in
tablet mode so it stops working.
Luckily the Yoga physically disables the "main" keyboard when in tablet mode,
so all we have to do is skip our code to disable the keyboard and the keys are
working again.
https://bugs.freedesktop.org/show_bug.cgi?id=103749
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is an external keyboard+touchpad but not recognised as touchpad by the
kernel so it's in mouse emulation mode. Double-taps are sent with impossibly
close timestamps and filtered out by the debouncing code. Since this isn't a
real button that can wear out anyway, let's just disable debouncing on this
device.
https://bugs.freedesktop.org/show_bug.cgi?id=105974
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
edit: Luckily there's no overlap between the users of those two flags so this
didn't trigger any bugs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The kernel fuzz handling is buggy, especially when we want to rely on the fuzz
value for our hysteresis. But since this is a hw property and (at least
sometimes) set by the driver, we can't make this a pure libinput hwdb set
either.
So our workaround is:
* extract the (non-zero) fuzz into a udev property so we don't lose it
* set the fuzz to 0 to disable the in-kernel hysteresis
* overwrite our internal absinfo with the property fuzz
This way we get to use the hw-specified fuzz without having the kernel muck
around with it. We also get to use the EVDEV_ABS_ values in 60-evdev.hwdb to
override a driver-set fuzz.
Two drawbacks:
- we're resetting the kernel fuzz to 0, this affects any other users of the
device node. That's probably a minor impact only.
- we can only save this in a udev property there's a risk of this information
getting lost when playing around with udev rules. That too should be a minor
issue.
https://bugs.freedesktop.org/show_bug.cgi?id=105303
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This changes the hysteresis region to an ellipse (usually a circle), where
previously it was a rectangle (usually square).
Using an ellipse means the algorithm is no longer more sensitive in some
directions than others. It is now omnidirectional, which solves a few
problems:
* Moving a finger in small circles now creates circles, not squares.
* Moving a finger in a curve no longer snaps the cursor to vertical
or horizontal lines. The cursor now follows a similar curve to the
finger.
https://bugs.freedesktop.org/page.cgi?id=splinter.html&bug=105306
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A set of wireless devices that can scramble the timestamps, so we get
press/release within 8ms even though I doubt the user is capable of doing
this. Since they're generally good quality anyway, let's just disable
debouncing on those until someone complains and we need something more
sophisticated.
https://bugs.freedesktop.org/show_bug.cgi?id=104415
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So we don't have to have newline handling in the callers. This effectively
reverts 6ab2999be9 "test: detect linebreaks in log messages".
https://bugs.freedesktop.org/show_bug.cgi?id=104957
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The previous approach was to remember the last event and flush it at the right
time. The new approach is to update the device state during the frame and send
out the events at EV_SYN time.
This gives us two advantages: we are not dependent on the kernel order of how
events come in and we can process events depending on other events in the same
frame. This will come in handy later for button debouncing.
This is also the approach we have in the touchpad and tablet backends.
Two FIXMEs are left in place, the button debouncing code and the lid switch
code. Both need to be handled in future patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We somewhat expect log message handlers to figure out how to prefix newlines
correctly anyway, but reducing the number of messages printed separately makes
the simple case better.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Split out the fallback-specific device handling from the more generic
evdev-specific handling (which is supposed to be available for all devices).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Previously we only listened for events on the first one to come up, based on
the assumption that there can only be one internal keyboard. The Razer Blade
laptop keyboards come with with multiple event nodes, all looking like a
normal keyboard. The one that comes up first is one for special keys, so
typing on the internal keyboard after a lid switch does not toggle the write
state.
Fix this by allowing for up to 3 keyboard listeners for a lid switch.
https://bugs.freedesktop.org/show_bug.cgi?id=102039
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
