This avoids inconsistencies between the LITEST_ enum value and the
shortname but also makes it easier to grep for any test cases that use
the same define. At the cost of the test names not looking very nice
anymore but oh well.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1157>
It's a bit annoying to only find those during a CI pipeline run, so
let's add a hook for it. Pre-commit doesn't seem to have something
useful for duplicate line detection so let's hack up a quick script
that can do this for us, together with the other whitespace checks in
the CI so we're consistent.
Excluded from the duplicate line checks are anything "Not C" and the
"include/" directory since we don't control those files.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1154>
As I tested my friend's ThinkPad A485, I found that the default multiplier
resulted in jumpy cursor and a slightly too quick acceleration curve. Upon
checking for Lenovo quirks, I found that since commits 383a60abea
("Better Thinkpad T480 trackpoint multiplier") and a1566e3492 ("quirks:
Thinkpad T470 trackpoint multiplier"), the TrackPoint multiplier for both
T470 and T480 (which shares the same keyboard FRUs with the A485) were set
to 0.4.
However, per my testing, by setting the multiplier to 0.4, the TrackPoint
speed became so painfully slow that it began to hurt my index finger...
I suspect the original commiters have set custom acceleration curves on
their own system, but I might be wrong.
Playing with the multiplier, I found 0.75 to be the most appropriate and,
interestingly, with anything >= 0.8, the TrackPoint began to become jumpy,
with the cursor appearing to have a very low poll rate on the screen (the
higher the multiplier, the worse it gets).
Since, as I mentioned above, the keyboard and TrackPoint parts are shared
between these three models, I'm assuming that this multiplier will work
well for them.
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1149>
Tablets may have different ABS_PRESSURE ranges with the oldest tablets
having 1k pressure range, then 2k, and the newer ones 8k.
If the same tool is used across two tablets with different ABS_PRESSURE
ranges, the first tablet in proximity calculated the range on where to
normalize to. As a result the other tablet either couldn't reach the
full pressure (2k pressure first, then 8k) or the full pressure range
was reached at a fraction of the full range (8k pressure first, then
2k).
Fix this by moving the threshold handling into a separate struct and
hardcoding up to 4 of those per tool. That is 2 more than the more
complicated setups I've heard of (and this only applies to tracking the
same stylus across those tablets anyway).
This duplicates the pressure offset heuristics but that's easier than
figuring out how to handle heuristics across potentially two tablets.
The range configuration is left as-is on the assumption that this one is
per tool, not per tablet.
Closes#1089
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1143>
touchpad_move_after_touch contains support for up to 5 fingers but was only run
with 2..4 fingers.
touchpad_multitap and several others using the same parameter definition were
long ago tested with 3..7 taps. In 8f92b091 this was reduced to 3..4 for CI
performance, while the commit message indicates 3..5 were intended.
The common theme is that the upper bound of `struct range` is interpreted
as exclusive, while some uses assumed it would be inclusive.
There are relatively recent helper functions range_init_inclusive and
range_init_exclusive (since 817dc423) to avoid this trap. Use them on the
remaining two ranged tests.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1142>
The two remaining ranged tests (abs_device_no_range, abs_mt_device_no_range)
are better served staying with ranges because parametrized tests need to
explicitly list all members of the range, which for these tests is not only
pretty big, but also contains abs axes reserved for future use. Those axes
have no names yet, making a future-proof conversion pretty much impossible.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1142>
Similar to the condition just north of here, if we have 3 fingers in a
roughly linear line and 3fg dragging is enabled, assume we're actually
trying to drag. This reduces the minimum movement otherwise required
to detect the type of gesture.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1042>
Exposed via new configuration option this enables 3 and 4 finger
dragging on touchpads. When enabled a 3/4 finger swipe
gesture is actually a button down + motion + button up sequence.
If tapping is disabled the drag starts immediately, if tapping is
enabled the drag starts after the tap timeout/motion so we can distinguish
between a tap and a drag.
When fingers are released:
- if two fingers remain -> keep dragging
- if one finger remains -> release drag, switch to pointer motion
When 3/4 fingers are set down immediately after releasing all fingers
the drag continues, similar to the tap drag lock feature. This drag lock
is not currently configurable.
This matches the macos behavior for the same feature.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1042>
Where the tapping code calls into the timeout function make sure we have
a separate event for this. This way we know whether the current gesture
event is caused by the hold timeout or something else.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1042>
This shouldn't have any effect in the current setup as there is
"coincidentally" no overlap between the two state machines so this is
effectively a noop.
Nonetheless, if we're about to send a tap button event we cannot be in
any other gesture than tapping so all swipe/pinch/holds need to be
cancelled.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1042>
The 5th finger was placed in the same position as the 4th finger which
doesn't have an effect in libinput but it looks wrong.
And the first finger was put down at 40/30 but then moved from 70/30 to
the new position, causing pointer jumps on some touchpads.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1145>
Require the type to be added in the litest_test_params_fetch() so we can
easily detect a mismatch. And add some type-safe getters that are much
easier to use for all the tests that only have a single parameter to
fetch anyway.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1139>
This is a workaround for a kernel bug with the Wacom Mobile Studio Pro
13: this device sends erroneous ABS_WHEEL events when pressing
buttons:
- evdev:
- [ 0, 0, 1, 256, 1] # EV_KEY / BTN_0 1
- [ 0, 0, 3, 8, 17] # EV_ABS / ABS_WHEEL 17 (+17)
- [ 0, 0, 3, 8, 0] # EV_ABS / ABS_WHEEL 0 (-17)
- [ 0, 0, 3, 40, 15] # EV_ABS / ABS_MISC 15 (+15)
- [ 0, 0, 0, 0, 0] # ------------ SYN_REPORT (0) ---------- +0ms
ABS_WHEEL to 17 then to 0 in the same frame. We should (and do) treat this
as a zero event and drop the 17 to the floor. Alas, we then generate a
ring event for the zero value despite our current value being zero
anyway. This again causes confusing behavior.
This is simple enough to work around, at least until the kernel is fixed
but also to prevent this happening in the future: warn if we get
multiple events and if so and the later event is zero, undo the axis
change state.
Closes: #1081
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1136>
Slightly less efficient but easier to read and it's not possible to
accidentally provide the wrong length. Plus it handles null pointers
correctly so get to skip the checks (which weren't needed for strneq()
either, but still).
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1121>
The previous invocation was gated behind a TABLET_OUT_OF_AREA check
resulting in a nonresponsive tool when the tablet was moved out of
proximity outside the tablet area and the area was changed.
Move the actual status bit changes up into tablet_flush()
so we unconditionally set those.
Part-of: <https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/1118>
