Not all mice have a click angle with integer degrees. The new
MOUSE_WHEEL_CLICK_COUNT property specifies how many clicks per full rotation,
the angle can be calculated from that.
See https://github.com/systemd/systemd/pull/4440 for more information
CLICK_COUNT overrides CLICK_ANGLE, so we check for the former first and then
fall back to the angle if need be. No changes to the user-facing API.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All these effectively returned bools anyway, switch the signature over to be
less ambiguous.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Until the kernel patches to handle LED group switching are in place we provide
the external API backed by an implementation that simply exposes one group
with one mode and no toggle buttons. This allows us to ship a libinput release
with the API in place and switch libinput later without having all the stack
above us being delayed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Carlos Garnacho <carlosg@gnome.org>
Trackballs are effectively stationary devices and can be positioned at any
rotation. They are also employed by users with impaired dexterity which
sometimes implies that they are positioned at an non-default angle to make the
buttons easier to reach.
Add a config option for rotation for trackball devices. Currently only
supported for 90-degree angles, if there is a need we can add more angles
later.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Logitech does not sell internal touchpads, the closest ones are the TK820 and
the K400 series devices. Neither of which need DWT, the touchpad is next to
the keyboard.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a key enables dwt and is held down when the timeout expires, re-issue the
timeout.
There is a corner case where dwt may not work as expected:
1. key down and held down
2. dwt timer expires, dwt is re-issued
3. touch starts
4. key is released
5. dwt timer expires
6. touch now starts moving the pointer
This is an effect of the smart touch detection. A touch starting after the
last key press is released for pointer motion once dwt turns off again. This
is what happens in the above case, the dwt timer expiring is the last virtual
key press. This is a corner case and likely hard to trigger by a real user.
https://bugs.freedesktop.org/show_bug.cgi?id=93984
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Label internal keyboards through the udev hwdb and only pair the internal
(usb) Apple touchpads with those keyboards labelled as such.
https://bugs.freedesktop.org/show_bug.cgi?id=93367
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In order to provide higher precision event time stamps, change the
internal time measuring from milliseconds to microseconds.
Microseconds are chosen because it is the most fine grained time stamp
we can get from evdev.
The API is extended with high precision getters whenever the given
information is available.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Hallelujah-expressed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Currently unused, but store the ratio of DPI:default DPI for later use.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
To quote Bryce Harrington from [1]:
"MIT has released software under several slightly different licenses,
including the old 'X11 License' or 'MIT License'. Some code under this
license was in fact included in X.org's Xserver in the past. However,
X.org now prefers the MIT Expat License as the standard (which,
confusingly, is also referred to as the 'MIT License'). See
http://cgit.freedesktop.org/xorg/xserver/tree/COPYING
When Wayland started, it was Kristian Høgsberg's intent to license it
compatibly with X.org. "I wanted Wayland to be usable (license-wise)
whereever X was usable." But, the text of the older X11 License was
taken for Wayland, rather than X11's current standard. This patch
corrects this by swapping in the intended text."
libinput is a fork of weston and thus inherited the original license intent
and the license boilerplate itself.
See this thread on wayland-devel here for a discussion:
http://lists.freedesktop.org/archives/wayland-devel/2015-May/022301.html
[1] http://lists.freedesktop.org/archives/wayland-devel/2015-June/022552.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Jonas Ådahl <jadahl@gmail.com>
On touchpads with resolutions, use a 5mm motion threshold before we unpin the
finger (allow motion events while a clickpad button is down). This should
remove any erroneous finger movements while clicking, at the cost of having to
move the finger a bit more for a single-finger click-and-drag (use two fingers
already!)
And drop the finger drifting, it was per-event based rather than time-based.
So unless the motion threshold was hit in a single event it was possible to
move the finger around the whole touchpad without ever unpinning it.
Drop the finger drifting altogether, if the touchpad drifts by more than 5mm
we have other issues.
https://bugzilla.redhat.com/show_bug.cgi?id=1230462
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If asprintf fails for any reason, the contents of the pointer
are undefined. While some platforms set it to NULL, there is no
guarantee that all will.
This change adds a simple wrapper to ensure proper NULL results
on failure.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Added LIBINPUT_PRINTF attribute and the required declaration for it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Check a couple of easy yes/no definitives that cover most Lenovo laptops,
and avoid false positives on Wacoms.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
There is quite a wide spread in the delta events generated by trackpoints,
some generate deltas of 1-2 under normal use, while others generate deltas
from 1-20.
It is desirable to normalize trackpoint deltas just like we are normalizing
mouse deltas to 1000 dpi, so as to give different model laptops aprox.
the same trackpoint cursor speed ootb.
Recent versions of udev + hwdb set a POINTINGSTICK_CONST_ACCEL udev property
which can be used to adjust trackpoints which are too slow / too fast
ootb, this commit implements support for that property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change vector_get_direction input to a normalized_coords type rather than
passing in a separate x,y pair, and rename it normalized_get_direction to
match. Since it now depends on the normalized_coords type which gets declared
in libinput-private.h also move it to libinput-private.h .
Note this commit also contains a functional change wrt the get_direction
usuage in the palm detection. The palm-detection code was calling get_direction
on non normalized coordinates, this commits changes the code to normalize
the coordinates first. This is the right thing to do as calling get_direction
on non normalized coordinates may result in a wrong direction getting returned
when the x and y resolution of the touchpad are not identical.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 0e64837f30.
Rather than a customized touchpad property, let udev handle this and set the
absinfo struct during the normal setup procedures. No need for libinput to
have a custom workaround here.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Delta movements on most slower movements are less than 1.0 per event, so we'd
end up with an undefined direction for all of them. This led to the velocity
being calculated across opposite movements rather than (as intended) across
movements within a shared octant.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Not all touchpad kernel drivers supply the x/y resolution. Let the udev hwdb
fix this up where possible and read the value from it.
This is intentionally only used on touchpads, touchscreen devices without
resolution should be considered buggy and fixed in the kernel.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
