No functional changes, just prep work for a later patch where the thumbs will
dynamically update their state (instead of just using yes/no/maybe).
Extracted from Matt Mayfield's thumb detection patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This moves the thumb state logging directly into that helper function too.
Extracted from Matt Mayfield's thumb detection patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently the same as tp_touch_active() but this will change.
No functional changes.
Extracted from Matt Mayfield's thumb detection patches.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
__builtin_popcount might not be available on all compilers, so using
it requires a configure check and fallback implementation. In fact
on gcc without an -march flag, it gets compiled to a function call to
libgcc. However, we only need to test whether multiple bits are set,
and this can be done easily with a bitwise and.
Signed-off-by: Michael Forney <mforney@mforney.org>
No real changes for the non-tablet code, but for tablets we now keep the
libwacom datbase around. The primary motivating factor here is response time
during tests - initializing the database under valgrind took longer than the
proximity timeouts and caused random test case failures when a proximity out
was triggered before we even got to process the first event.
This is unfortunately a burden on the runtime now since we keep libwacom
around whenever a tablet is connected. Not much of an impact though, I
suspect, chances are you're running a web browser and everything pales against
that anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Follow-up to 6229df184e
We must not rely on the caller to toggle the left-handed bits correctly since
they may not know which devices belong together (despite device groups). Let's
do the right thing here, if the tablet is set to left-handed, rotate the
touchpad accordingly.
Note that the left-handed setting of the tablet is left as-is
(right-handed). Until we have notifications about configuration changes, this
is the best we can do.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tablets in left-handed mode are rotated, so we need to rotate the touchpad
part of them too. This doesn't affect all tablets though, some of them are
symmetrical and the left-handed mode merely changes the button order around
(some of the earlier Bamboos). So we rely on libwacom to tell us which device
must be rotated.
The rotation itself is done on the input coordinate itself as we get it. This
way any software buttons, palm zones, etc. are automatically handled by rest
of the code.
Fixes#274
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to specify the location that needs to be arbitrated, rather
than just disabling the whole device altogether. This patch just adds the
hooks, no implementation.
This is internal API only, one backend can specify an area in mm which gets
converted to device coordinates in the target device and arbitrated there.
Right now, everything simply passes NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This enables us to change the types of touch arbitration, with the focus on
allowing location-based touch arbitration as well as the more generic "disable
everything".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The shape of the average hand implies that two fingers down within the lower
thumb area (the bottom few mm of the touchpad) cannot be thumbs without
significant contortion. So let's not mark them as thumb.
Fixes#126
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
tp_detect_thumb_while_moving() assumes that of the 2 fingers down, at least
one must be in TOUCH_UPDATE, otherwise we wouldn't have a speed to analyze for
thumb.
If a touch starts in HOVERING and exceeds the speed limit, we were previously
increasing the 'exceeded count'. This later leads to an assert() in
tp_detect_thumb_while_moving() when the second finger comes down because
although we have multiple fingers, none of them are in TOUCH_UPDATE.
This only happens when fingers 2 and 3 come down in the same event frame,
because then we have nfingers_down at 2 (the hovering one doesn't count) but
we don't yet have a finger in TOUCH_UPDATE.
Fix this twofold, first by now calculating the speed on anything but
TOUCH_UPDATE. And second by force-resetting the speed count on
TOUCH_BEGIN/TOUCH_END so we definitely cover all the hover transitions.
Fixes#150
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Anything that merely requires a once-off check during initialization can just
use the quirks directly, no need to copy them over to the model flags.
Fixes#146
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On Dell i2c touchpads, the controller appears to go to sleep after about 1s of
inactivity on the touchpad. The wakeup takes a while so on the next touch, we
may see a pointer jump, specifially on the third event (i.e. touch down,
event, event+jump). The MSC_TIMESTAMP value carries a hint for what's
happening here, the event sequence for a touchpad with scanout intervals
7300µs is:
...
MSC_TIMESTAMP 0
SYN_REPORT
...
MSC_TIMESTAMP 7300
SYN_REPORT +2ms
...
MSC_TIMESTAMP 123456
SYN_REPORT +7ms
...
MSC_TIMESTAMP 123456+7300
SYN_REPORT +8ms
Note how the SYN_REPORT timestamps don't reflect the MSC_TIMESTAMPS.
This patch adds a quirk activate MSC_TIMESTAMP watching. When we do so, we
monitor for a 0 MSC_TIMESTAMP. Let's assume that the first event after that is
the interval, then check the third event. If that third event's timestamp is too
large rewrite the touches' motion history to reflect the correct timestamps,
i.e. instead of the SYN_REPORT timestamps the motion history now uses
"third-event SYN_REPORT timestamps minus MSC_TIMESTAMP values".
The pointer accel filter code uses absolute timestamps (#123) so we have to
restart the pointer acceleration filter when we detect this jump. This allows
us to reset the 0 time for the filter to the previous event's MSC_TIMESTAMP
time, so that our new large delta has the correct time delta too. This
calculates the acceleration correctly for that window.
The result is that the pointer is still delayed by the wake-up window (not
fixable in libinput) but at least it ends up where it should've.
There are a few side-effects: thumb, gesture, and hysteresis all still use the
unmodified SYN_REPORT time. There is a potential for false detection of either
of these now, but we'll have to fix those as they come up.
Fixes#36
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This function expected distances per-frame, not per-time which gives us
different behaviors depending on the hardware scanout rate. Fix this by
normalizing to a 12ms frame rate which reflects the touchpad I measured all
the existing thresholds on.
This is a bit of a problem for the test suite which doesn't use proper
intervals and the change to do so is rather invasive. So for now we set the
interval for test devices to whatever the time delta is so we can test the
jumps without having to worry about intervals.
Fixes#121
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In testing on an Apple Magic Trackpad, thumb touches are reliably
detected by being quite large in the major dimension, but around
half the size in the minor dimension.
Use a boolean for whether we need to use it and drop the unneded absinfo
assignment (together with the goto).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
libinput applies averaging to the velocity of most pointer devices. Averaging
the velocity makes the motion look smooth and may be of benefit to bad input
devices. For good devices, however, it comes at the unfortunate price of
decreased accuaracy.
This change turns velocity averaging off by default (sets ntrackers to 2 instead
of 16) and allows for it to be turned back on via a quirk, for bad devices which
require it.
Previously, we had a hard threshold of 20mm per event frame. That is just
about achievable by really fast movements (in which case you don't care too
much about the jumps anyway because you've already hit the edge of the screen).
Sometimes pointer jumps have lower deltas that are achievable even on slower,
more likely motions. Analysis of finger motion has shown that while a delta
>7mm per event is possible, jumping _by_ 7mm between two events is unlikely
and indicates a pointer jump. So let's diff the most recent delta and the
current delta, if it increases by 7mm between two event frames let's say it's
a pointer jump and discard it.
Helps with but does not fully resolve:
https://gitlab.freedesktop.org/libinput/libinput/issues/80https://gitlab.freedesktop.org/libinput/libinput/issues/36
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A three-finger touch may cause slot N to end, in a frame after the
BTN_TOOL_TRIPLETAP. This causes tp->nfinger_down to be decremented to 2 as the
touch switches to MAYBE_END - which happens to be our num_slots. We exit early
and never restore the touch correctly.
Fix this by checking that the number of fake touches is equal to the slots, if
it is higher then we need to check for recovery.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/99
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
To trigger this, we'd need 1, 2, 3 fingers down, release fingers 1 and 2 but
keep 3 down. Then put finger 1 down again. Touches 1 and 3 are alive now,
touch 2 is in state NONE.
During the thumb detection we took the first touch not in BEGIN and assigned
it to "first" - this would now be the second touch in state NONE.
Real effect is relatively minimal since we only use the coordinates here.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/89
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
destroy isn't called until the last libinput_device_unref(), so we may trigger
a debounce timer after the device was removed. The same fix is neded for the
touchpad interface.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/72
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The tapping code can handle palm states now, so there is no need to disable
tapping altogether when a tool-based palm is detected.
Fixes https://gitlab.freedesktop.org/libinput/libinput/issues/65
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Ignore motion when pressure/touch size fell below the threshold, thus
ending the touch.
Real world significance: subjectively scrolling/cursor positioning with
a touchpad now a bit better on SAMSUNG NP305V5A laptop.
https://gitlab.freedesktop.org/libinput/libinput/merge_requests/4
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
LIBINPUT_ATTR_THUMB_PRESSURE_THRESHOLD now determines whether we do thumb
pressure detection or not. Much better than having a hardcoded default that
may or may not be correct on any given device.
This patch is likely to break thumb detection on some touchpads, the only
property so far is to restore the default of 100 for all Lenovo Thinkpad
touchpads. More rules are needed, we'll just wait until someone shouts.
https://bugs.freedesktop.org/show_bug.cgi?id=106458
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This removes the artificial 3 keyboard limit. If you have more internal
keyboards than that, something is wrong in your setup but that shouldn't stop
us from working. Or more specificially: this can happen easily when running
tests so let's not fail the test suite because we created a few hundred
keyboards.
We'll still throw out a log message though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There are 4 possible cases why a touchpad suspends right now: lid switch,
tablet mode switch, sendevents disabled and sendevents disabled when an
external mouse is present.
But these reasons can stack up, e.g. a lid switch may happen while send events
is disabled, disabling one should not re-enable the touchpad. This patch adds
a bitmask to remember the reasons we're current suspended, resuming only
happens once all reasons are back to 0.
https://bugs.freedesktop.org/show_bug.cgi?id=106498
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Because we register the handler separately (once for lid, once for
tablet-mode) the handler is called twice for the same event. This causes a
double-suspend of the touchpad, though it doesn't seem to have any real
effect.
Split it up so that each handler function only does one thing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Well, I say "measure" but really at this point it just reads the
properties/axes and then does it's best to auto-generate a hwdb entry that
matches the user's hardware and sets a fuzz value on the device. Ideally this
reduces the number of hand-holding required in bugzillas. There are plenty of
things that can go wrong, so our fallback is still to throw up our hands and
point to the documentation.
https://bugs.freedesktop.org/show_bug.cgi?id=98839
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
