Pure movement detection is quite unreliable when trying 3-finger pinch
gestures, and many gestures are misdetected as swipes. Before looking at the
motion, look at the constellation of the fingers. If one finger is 20mm below
the other one, assume they're in a pinch position.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
As we implement more gestures, we will drop two-finger scrolling performed by
only a single finger movement.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Setting TRIPLETAP unsets DOUBLETAP, etc. This doesn't usually happen with
kernel devices, but every once in a while I get this wrong in a test and spend
hours debugging the code...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some of the 2-slot touchpads don't do gestures though (e.g. semi-mt) so skip
those.
And change the movement granularity for the pinch and spread tests so we stay
under one degree angle for lower-resolution touchpads too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
open_restricted() doesn't always mean 'open the fd'. When the X server uses
systemd-logind, the fd is opened once before PreInit and then kept open across
devices being disabled and enabled through the protocol.
When the device is re-enabled and libinput_path_add_device is called for the
device, we may have events pending on the fd, leaking information that we
should just ignore.
There's also the potential of inconsistent state. The kernel updates the
device state whenever it processes an event, the evdev ioctls return that
state. If events are pending, the state we see is newer than the events we
process immediately after initialization. That can lead to confusion.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If an x220 is updated to the touchpad firmware version 8.1, the touchpad
suffers from the same issues as the x230 and needs custom acceleration code.
Unfortunately we cannot detect this otherwise, so it is left to the user as a
custom hwdb setting.
https://bugzilla.redhat.com/show_bug.cgi?id=1264453
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The file is already larger than 4k, so we ended up truncating the file for the
tests. This went unnoticed until recent additions that ended up truncating it
halfway through an assignment.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Converts two doubles to 24.8 fixed-width integers so assertions can be made with
doubles in tests
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
(cherry picked from commit 9d96286a44)
Once we trigger diagonal scrolling, the device's scroll direction is set as
horiz+vert. From then on, both axes will be set on every subsequent scroll
event, even when the actual delta for an axis is 0.
This causes continuous scroll stop events in clients that care about these
things.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We dont' want to fill up the event queue and cause SYN_DROPPED events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If all fingers are released in the same frame, we won't be able to find the
top-most touch.
https://bugs.freedesktop.org/show_bug.cgi?id=93204
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If the test is filtered out and we never run it generates a false positive.
Though it isn't listed in the "Checks" summary this is a bit hard to tell when
you're running >700 tests.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
These aren't real button events and they are handled elsewhere, either through
proper touch events on touchscreen or through custom handling in the touchpad
case.
https://bugs.freedesktop.org/show_bug.cgi?id=93165
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
At least on the t440, this is enough to trigger correct detection between
pinch and scroll 90% of the time. Since scrolling is significantly more
prevalent than gesturing, erring on the side of scrolling at the cost of
misdetecting some gestures is acceptable.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Otherwise events that are already queued before the first libinput_dispatch()
have a negative timestamp.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There were two files (doc/svg/{edge,twofinger}-scrolling.svg) that had both
arrow heads pointing to wrong direction. Those arrow heads used markers but
their ids were defined wrong and therefore they displayed weirdly. On Firefox
the arrow head that should have pointed to left pointed actually to right.
This commit fixes that problem by defining the marker ids correctly.
I tested on Firefox 40.0.3 that the arrow heads are now displayed correctly.
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Tested-by: Bryce Harrington <bryce@osg.samsung.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
struct list isn't a null-terminated list, list_for_each() causes 'g' to be set
to the list head at the end of the loop. Returning that as group caused random
memory to be overwritten.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The Asus RoG Gladius exposes two event nodes, one mouse, one keyboard. The
keyboard node has REL_X/Y and REL_HWHEEL on top of the various key bits and
ABS_VOLUME.
The keyboard node does not have BTN_* set, udev tags this device as a
keyboard only, not as a pointer but we still initialize the pointer caps for
it because of the wheel.
When moving this mouse, some deltas (ca "1 in every 20") are sent through the
keyboard node, causing a crash because we never initialized pointer
acceleration.
https://bugzilla.redhat.com/show_bug.cgi?id=1275407
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This check is already in place for all other event types.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
And use the unaccelerated motion events. Better than crashing, and better than
a non-moving mouse.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
tap-tap-down-move should emit 1 click + press, not 2 clicks + press
https://bugs.freedesktop.org/show_bug.cgi?id=92016
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The quartett of new config functions is:
libinput_device_config_accel_get_profiles
libinput_device_config_accel_get_profile
libinput_device_config_accel_set_profile
libinput_device_config_accel_get_default_profile
The profile defines how the pointer acceleration works, from a very high-level
perspective. Two profiles are on offer, "adaptive", the standard one we have
used so far and "flat" which is a simple multiplier of input deltas and
provides 1:1 mapping of device movement vs pointer movement.
The speed setting is on top of the profile, a speed of 0 (default) is the
equivalent to "no pointer acceleration". This is popular among gamers and
users of switchable-dpi mice.
The flat profile unnormalizes the deltas, i.e. you get what the device does
and any device below 800dpi will feel excruciatingly slow. The speed range
[-1, 1] maps into 0-200% of the speed. At 200%, a delta of 1 is translated
into a 2 pixel movement, anything higher makes it rather pointless.
The flat profile is currently available for all pointer devices but touchpads.
https://bugs.freedesktop.org/show_bug.cgi?id=89485
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
If a caller has a reference to a device group when the context is destroyed,
the memory for the group is never released. Calling
libinput_device_group_unref() will release it and there are no side-effects
since the group has no back-references. It's inconsistent with the rest of
libinput though - all other resources get released on libinput_unref().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
The following sequence currently generates a right-button event:
finger 1 down
finger 2 down
finger 1 up
finger 2 held down
This is easily triggered with short scroll events. There are two issues here:
first is that the tapping code elsewhere treats any tap with a second finger
down as a left-button tap, not a right button one. So if anything, we should
generate a left button click here, not a right button click.
Arguably, generating a button click here is wrong though, it's not a very well
defined sequence and relatively difficult to trigger intentionally. So the
best solution here is to simply ignore the release event and move straight
back to state HOLD - unless the second finger is released within the timeout.
If the finger is set down again during the timeout, we move straight to
TOUCH_2_HOLD - this could eventually be interpreted as a tap, but not for now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
