Don't rely on a magic version tag, instead let a device define a udev rule and
drop that into the udev runtime directory before the device is created.
There are a couple of caveats with this approach: first, since this changes
system-wide state it may cause issues on the device the test suite is run on.
This can be avoided if the udev rules have filter patterns that ensure only
test devices are affected.
Second, the check test suite aborts but it doesn't run the teardown() function
if a test fails. So far this wasn't a problem since uinput devices disappear
whenever we exit. The rules files will hang around though, so an unchecked
fixture was added to delete all litest-foo.rules files before and after a test
case starts. Unchecked fixtures are run regardless of the exit status of the
test but run in the same address space - i.e. no ck_assert() usage.
Also unchecked fixtures are only run once per test-case, not once per test
function. For us, that means they're only run once per device (we use the
devices as test case), i.e. if a test fails and the udev rule isn't tidied up,
the next test may be unpredictable. This shouldn't matter too much though.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Notable: sends BTN_0/1/2 instead of the trackpoint
This device currently has the INPUT_PROP_TOPBUTTONPAD property set, kernel
patches [1] and [2] are pending to remove this. This test device already lacks
the property.
[1] https://patchwork.kernel.org/patch/5730371/
[2] https://patchwork.kernel.org/patch/5730451/
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This device sends touch information before BTN_TOUCH
https://bugs.freedesktop.org/show_bug.cgi?id=87197
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
An upcoming synaptics semi-mt device needs the same code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In a few tests we care about that a specific set of events are in the queue
but not about the details of the events (usually checked elsewhere). Instead
of manual loops, provide a helper function that also checks that there is at
least one of those events in the queue.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Turn test_trackpoint_scroll into a generic helper function for testing
"button scrolling".
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This doesn't test for direction only, it tests for the minimum distance we
expect in the scroll event. Rename accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Re-uses the touch_down interface for now, but requires the slot is always 0.
That's easier for now than adding a new interface for abs event, at least
until we have more than one device that needs it.
This device, along with a couple of similar ones have a tendency to break in
the X.Org stack without people noticing. They're special in that they have
absolute x/y axes but relative wheels. For libinput that's not as much of a
problem as it is in X but let's add them anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
In reality moving a touch from point to another takes time. In some cases
(when a timeout may trigger during the move, e.g. tap-n-drag on a touchpad),
this is important. Add a sleep_ms parameter, which will cause
litest_touch_move_to to sleep the specified amount of ms every step.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the device description, define the interfaces for touch down/move even
though we technically don't have those interfaces. Makes it easier to test.
The fake-mt tests make sure the device shows up correctly and that no touch
events are being sent for touch events.
This device is a pointer device too, the pointer tests will test it for
correct functionality of the REL_X/Y bits, no special test needed.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For some tests we need to string multiple event sequences together into one
event frame. Use a push/pop frame approach that stops litest from sending any
EV_SYN/SYN_REPORT events, so we can merge two touches together by e.g.
litest_push_event_frame(d);
litest_touch_down(d, 0, 10, 10);
litest_touch_down(d, 1, 20, 50);
litest_pop_event_frame(d);
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Rather than a random msleep() with a comment, use a helper function that
describes what we're waiting for. Also makes changing the timeouts easier in
the future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Make check_2fg_scroll functionality available outside of touchpad.c ,
no functional changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For adding a litest device to an existing context.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The litest features overlap with the litest device specifiers, so it's easy to
pass in LITEST_MOUSE where LITEST_POINTER should be passed in, and vice versa.
Lacking proper type checking the best we can do here is simply move the
devices into the negative range and check for that.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
With a non-zero absmin for both axes and different ranges for x/y, just to
detect those errors.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
litest_wait_for_event() returns if any event is available.
litest_wait_for_event_of_type(... type, type, type, -1) returns if any of the
given event types is availble. All other events are discarded.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some tests in test/path.c and test/udev.c are not dependent on
device behaviour but rather managing of device lifetime etc. Run those
tests only once with only one device, resulting more or less the same
code coverage but shorter run time.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Provides the bounding box only, with slot 0 always being the upper/left, slot
1 being the lower-right touch. This needs to use the touch_down etc. litest
interfaces, which are now widened to double (leftover from 489630f58) and a
device-specific private pointer in the litest device.
New device feature for litest: LITEST_SEMI_MT
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Set BTN_TOUCH, BTN_TOOL_DOUBLETAP automatically depending on the number of
fingers down.
This emulates real event sequences a bit better than the current approach,
though it's not a 100% correct emulation:
1) On real devices, BTN_* are usually sent last before the SYN_REPORT - here
they are sent first to slot in with the custom, device-specific event
sequence. We should only ever look at the complete sequence anyway, so this
shouldn't matter.
2) On real devices, the switch from BTN_TOOL_DOUBLETAP to TRIPLETAP and vice
versa is not always toggled within the same SYN_REPORT
3) On synaptics devices, BTN_TOUCH is released in the frame where
BTN_TOOL_DOUBLETAP is set. It is then immediately set again in the next
frame. With the current litest framework this is hard to integrate, so we
just leave BTN_TOUCH set the whole time, which is what MT devices do if
they don't have BTN_TOOL_DOUBLETAP.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Using a 0-100% range is useful but in some cases we need events with finer
than 1% granularity.
And fix up the two-finger test that now fails. This was a bug in the test
anyway, the dx/dy supplied here was 1% of the touchpad width. Confined to
integers this meant we only ever had the touch down, then the single move by
1%. That caused two events - not enough to satisfy tp_estimate_delta, so we
always had a delta of 0/0 regardless of the size of the move.
Now with doubles this fails, so drop it to 0.1% instead, which is small enough
on all touchpads we currently have.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Mainly testing the behaviour when clicking during a tap or tap-n-drag. Adds a
new "feature" to the litest system, Apple clickpads don't have software
buttons by default.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Checks if the queue is empty and prints informatino about any events before
failing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Instead of having a test device which only purpose is to test absolute
coordinate transformation, use the litest_create_device_with_overrides()
API to create a specially crafted wacom touch device with high
resolution.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
For specific tests we need something that e.g. looks like a touchpad, but has
a different name, a different number of slots, etc. In this case, the
following code will do exactly that:
struct input_absinfo overrides[] = {
{ .value = ABS_MT_SLOT, .minimum = 0, .maximum = 100 },
{ .value = -1 },
};
litest_create_device_with_overrides(LITEST_SYNAPTICS_CLICKPAD,
NULL, NULL, &overrides, NULL);
For general event codes, overrides can only add to the set of events, they
can't remove.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Most of the test devices now are static descriptions anyway, make them fully
static now, including for touch events.
Switch the synaptics device now as example, the rest comes later for easier
patch review.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Both functions accept a series of event types/codes tuples, terminated by -1.
For the even type INPUT_PROP_MAX (an invalid type otherwise) the code is used
as a property to enable.
The _abs function als takes an array of absinfo, with absinfo.value
determining the axis to change. If none are given, abs axes are initialized
with default settings.
Both functions abort on failure, so the caller does not need to check the
return value.
Example code for creating a rel device:
struct libevdev_uinput *uinput;
struct input_id id = { ... };
uinput = litest_create_uinput_device("foo", &id,
EV_REL, REL_X,
EV_REL, REL_Y,
EV_KEY, BTN_LEFT,
INPUT_PROP_MAX, INPUT_PROP_BUTTONPAD,
-1);
libevdev_uinput_write_event(uinput, EV_REL, REL_X, -1);
libevdev_uinput_write_event(uinput, EV_SYN, SYN_REPORT, 0);
...
libevdev_uinput_destroy(uinput);
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Add a test case and test device that checks if the scale transform can
handle high resolution devices and output monitor resolutions.
The test case is created in a way that it will fail if the coordinate
transform expression will overflow if only 32 bit integer data
containers are used.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Creates an empty context that is not hooked up to a device. Callers can then
add and remove devices to this context using libinput_path_add_device() and
libinput_path_remove_device().
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This means we do have to provide the get_current_screen_dimensions() call in
litest now, just hardcode it to 1024x768.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A rather large commit, copied from a similar (almost identical) suite in
libtouchpad and ported for libinput.
The goal here is to make testing for various devices easy, so the litest
("libinput test") wrappers do that. The idea is that each device has some
features, and tests are likely to exercise some features or won't work with
other features.
Each test case takes a list of required features and a list of excluded
features. The test suite will create a new test case for each device in the
suite that matches that set.
For example, the set of required LITEST_TOUCHPAD, excluded LITEST_BUTTON would
run on clickpads only, not on touchpads with buttons.
check supports suites and test cases, both named. We wrap that so that each
named set of cases we add are a test suite, with the set of devices being the
test cases. i.e.
litest_add("foo:bar", some_test_function, LITEST_ANY, LITEST_ANY);
adds a suite named "foo:bar" and test cases for both devices given, with their
shortnames as test case name, resulting in:
"foo:bar", "trackpoint"
"foo:bar", "clickpad"
...
Multiple test functions can be added to a suite. For tests without a device
requirement there is litest_add_no_device_test(...).
The environment variables CK_RUN_SUITE and CK_RUN_CASE can be used to narrow
the set of test cases. The test suite detects when run inside a debugger and
disables fork mode (the default).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
